Xantrex XEL Series: Linear 90 W - 180 W Bench DC Power Supply

Product may not be exactly as shown

The Xantrex XEL benchtop power supply is as easy to use as simple analog power supplies but offers the flexibility of advanced digital features. The user interface allows easy control with single-turn knobs including a fine control knob for voltage.

This easy-to-use interface is complemented by V-Spa, S-lock and Output Enable functions.
V-Span allows the user to set a maximum and minimum value over which the knob control
operates. This provides more precise control over the voltage as the knob operates over a
narrow range as well as protecting devices under test by limiting the maximum voltage.
S-Lock provides an easy method to output a regulated fixed voltage. Output Enable lets the user setup the desired voltage and current levels prior to actually turning on the output. All of these features in a laboratory bench supply are only found in the XEL series.

At 4.2x11.3 inches (108mm x 287mm), the XEL series occupies the least bench top space of any programmable power supply. The dual output model offers 90W per channel, also in a compact 8.4x11.3 inches (216mm x 287mm) The dual output XEL30-3D is two 30V/3A power supplies in one unit. All of the features of the single output version are also in the dual output. Plus, the outputs can be operated in 4 modes: isolated, tracking, ratio tracking and true parallel. In addition, the outputs can be enable (on/off) independently or synchronously.

V-span, S-lock, and Output Enable

Please contact us and speak to one of our sales representatives to request a quote or more information on our products.

Specifications

Output : Voltage and Current
Output Ratings	XEL 15-5	XEL30-3	XEL60-1.5	XEL30-3D
Voltage (VDC)	0-15	0-30	0-60	0-30
Current (ADC)	0.1-5	0.1-3	0.1-1.5	0.1-3/6
Power (W)	75	0-90	90	90/180

Output Performance
Feature	XEL 15-5	XEL30-3	XEL60-1.5	XEL30-3D
Voltage Meter	4-digit meter
Accuracy	0.1% + 10mV
Resolution	10mV
Current Meter	4-digit meter
Accuracy	0.5% + 3mA	0.3% + 3mA	0.3% + 3mA	0.3% + 3mA*
Resolution	1mA	1mA	1mA	1mA
Low Current	<500mA
Accuracy	0.3% + 0.3mA
Resolution	0.1mA
Voltage Ripple	0.4 mVRMS
Voltage Noise	2 mVpp
Current Ripple	5 mARMS
Load Regulation
Voltage	0.01% + 2mV
Current	0.01% + 500?A
Line Regulation (10% line change)
Voltage	0.01% + 2.0mV (with remote sense up to 0.5V line Drop 0.01% + 4.5mV)
Current	0.01% + 250 µA (for line resistance <0.5ohms when remote sense is used.)
Transient Response	<50µs to within 50mV of setting (90% load change)
Common
AC Input	115 VAC ± 10%, 50/60Hz ( 230VAC available as option MHV )
Power	280VA maximum
Operating Temp	5-40 °C, 20-80% RH
Storage Temp	-40 to +70 °C
Weight	9.9 lbs. / 4.5 kgs, XEL30-3D: 18.8 lbs. / 9 kgs
Size (WxHxD)	4.2x5.2x11.3 inches / 107x131x288 mm, XEL30-3D: 8.4x5.2x11.3 inches / 214x131x288 mm
Options
ARM-XPDG2	Rackmount Kit

* Current accuracy in parallel mode = 0.5% + 3mA