Discount Products: Look through products available for a 25% – 50% discount in 2020. The items provided on a first come, first serve basis.
View Discounted Products

TDK-Lambda Genesys™ 1U Half Rack 750W Programmable DC

TDK-Lambda Genesys™ 1U Half Rack 750W Programmable DC

Power Supply Outputs from 6V (@100A) to 600V (@1.3A)

  • High Power Density 750W in 1U half-rack size
  • Wide Range Input (85 – 265Vac Continuous)
  • Active Power Factor Correction (0.99 typical)
  • Output Voltage up to 600V, Current up to 100A
  • Built-in RS-232/RS-485 Interface Standard
  • Last Setting Memory; Front Panel Lockout
  • Advanced Parallel reports total current up to four identical units
  • Reliable Encoders for Voltage and Current Adjustment
  • Constant Voltage/Constant Current auto-crossover
  • Independent Remote ON/OFF and Remote Enable/Disable
  • External Analog Programming and Monitoring
  • Reliable Modular and SMT Design
  • Side-by-side mounting of two units in a 19” rack
  • Optional Interfaces
  • Isolated Analog Program /Monitor
  • IEEE Multi-Drop – SCPI
  • LAN Interface USB Interface
  • LabView® and LabWindows® drivers
  • Five Year Warranty

 

REQUEST A QUOTE
SKU: GENH Categories: ,



Description

TDK-Lambda Genesys 1U Half Rack 750W Programmable DC

Product Overview and Models

TDK-Lambda Genesys 1U Half Rack 750W Programmable DCThe Genesys™ 1U Half-Rack (GENH) series of 750W DC Programmable Power Supplies provides high power density (up to 780W) with a complete set of user-friendly interfaces within a 1U (1.75”) half-rack profile. This series offers Output voltages from 6V (@ 100A) to 600V (@ 1.3A) and a wide-range Single-phase AC Input (85-265VAC, 47-63Hz) with Active Power-Factor Correction (0.99 @ rated load). Genesys 1U Half Rack 750W Programmable DC Power Supply

Multiple remote programming methods are available including the built-in Remote Analog Program/Monitor and Remote Digital Serial Communication (RS-232/RS-485) Interfaces along with the optional LXI certified LAN, IEEE (IEEE 488.2 & SCPI compliant), USB (2.0 compliant) and Isolated Analog (5V/10V and 4-20mA) Interfaces. TDK-Lambda Genesys 1U Half Rack 750W Programmable DC

All models are CE Marked in accordance with the Low Voltage and EMC Directives, are RoHS compliant, have worldwide Safety Agency approvals (UL/cUL 60950-1 and EN 60950-1 listed) and offer a five (5) year Warranty.

Model Number

Rated
Power
(Watts)

Output
Voltage
(Volts)

Output
Current
(Amps)

Voltage Ripple
mV RMS
(5Hz-1MHz)

Ripple & Noise
mV p-p
(<20MHz)

Efficiency
%
(100/200VAC)

Datasheet

GENH 6-100 600 0-6 0-100 8 60 76/78
GENH 8-90 720 0-8 0-90 8 60 78/81
GENH 12.5-60 750 0-12.5 0-60 8 60 81/84
GENH 20-38 760 0-20 0-38 8 60 82/85
GENH 30-25 750 0-30 0-25 8 60 82/85
GENH 40-19 760 0-40 0-19 8 60 83/87
GENH 60-12.5 750 0-60 0-12.5 8 60 83/87
GENH 80-9.5 760 0-80 0-9.5 8 60 83/87
GENH 100-7.5 750 0-100 0-7.5 8 80 83/87
GENH 150-5 750 0-150 0-5 10 100 83/87
GENH 300-2.5 750 0-300 0-2.5 25 150 83/87
GENH 600-1.3 780 0-600 0-1.3 60 300 83/87

 

Ordering Information

Model

Voltage

Current

Factory Options

Line Cord

GENH 60 12.5 LAN U
          IEMD    
          USB    
          IS510    
          IS420    

Technical Details

The Genesys™ Half-Rack (GENH) series of DC Programmable Power Supplies provides high power density (up to 780W) with a complete set of user-friendly interfaces within a 1U half-rack profile. It offers Output voltages from 6V (@ 100A) to 600V (@ 1.3A) and a wide-range AC Input (85-265VAC, 47/63Hz) with Active Power-Factor Correction (0.99 @ rated load). Genesys 1U Half Rack 750W Programmable DC Power Supply

These units can operate in either Constant-Current (CC) or Constant-Voltage (CV) mode with a user-friendly front panel interface (continuous encoders for FINE and COARSE adjustment and four-digit LED Voltage and Current meters) and provide safety features such as Safe/Auto Re-Start, Last Setting Memory and built-in protective functions (OVP, UVL, Current FOLDback, OTP and AC Low-Line).

Multiple remote programming/monitor/control methods are available including the built-in J1 Remote Analog and the RS232/RS485 Multi-Drop Remote Digital Interface (where up to 31 units may be controlled). Other Optional Remote Digital Interfaces (LAN, IEEE and USB) and Isolated Analog (5V/10V and 4-20mA) Interfaces are optional and factory installed (one per power supply). Instrument Software Drivers (NI LabView and NI LabWindows™) are also available.

Higher power systems can be configured using the Master/Slave “Advanced” Parallel operating mode which configures the Master unit to be the single–point for programming, measurement and status of the total current of the paralleled system. Thus, four units can operate as a single 3kW power supply, increasing the flexibility for system designers. Genesys 1U Half Rack 750W Programmable DC Power Supply

All models are CE Marked in accordance with the Low Voltage Directive (RoHS compliant), have worldwide Safety Angency approvals (UL/cUL 60950-1 and EN 60950-1 listed)and offer a five (5) year Warranty.

For more information about the Genesys™ 3U AC/DC Programmable Power Supply Series, contact the TDK-Lambda Americas High Power Division directly at +1-800-665-7301 or online at – Sales, or contact your local Sales representative Representatives 
A wide range of other TDK-Lambda High Power Division Low Voltage and High Voltage power supplies can be viewed from the website

Specifications TDK-Lambda Genesys 1U Half Rack 750W Programmable DC

AC Input
All models: Wide-range single-phase 85-265VAC, 47-63Hz
AC Line Current (100VAC/200VAC):
10.5A/5.0A (750W)
PFC: 0.99 (Active)
Output Characteristics
Line Regulation (CV): 0.01% of Vor + 2mV
Load Regulation (CC): 0.01% of Ior + 2mA
Line Regulation (CV): 0.01% of Vor + 2mV
Load Regulation (CC): 0.01% of Ior + 2mA
Protective Features
Adjsutable OVP, UVL
Adjustable Current FOLDback
Over-Temperature, AC-Fail
Safe-Start/Auto-ReStart
Last Setting Memory, Front Panel Lock 

Programming
Front Panel
RS-232/RS-485 Digital via DIP-switch setting
0-5V/0-10V Analog via DIP-switch setting

Mechanical
Dimensions: 8.43” (W) x 1.75” (H) x 17.22” (D)
Weight/Mass: 9.5lbs/4.5kg

Interface Options (one per unit)
(factory installed, embedded)
• LAN: LXI certified (Class C)
• IEMD: IEEE 488.2 & SCPI compliant
• USB (2.0 compliant)
• Isolated Analog Program/Monitor
o IS510: 0-5V & 0-10V (user-selectable)
o IS420: 4-20mA

All specifications subject to change without notice.
TDK-Lambda Genesys 1U Half Rack 750W Programmable DC

Reviews

There are no reviews yet!

Be the first to write a review

*

Download Data Sheet
Get in touch with us to inquire about our tailored consulting services.