Products

The MAS 1.0/1.5 – 35kg Manual Antenna Stand is a robust and versatile stand for precise antenna positioning in EMC testing environments.

Key Features:

• Adjustable height from 1.0 m to 1.5 m using hydraulic cylinder
• Manual polarization change from 0° to 90°
• Supports antennas up to 35 kg
• Manual tilt adjustment up to 30°
• Rotating antenna bar to eliminate elevation errors
• Stable base: 0.9 m x 1.57 m
• Suitable for EMC chambers, labs, and industrial setups

The MGA 1033 Magnetic Immunity Generator and Analyzer is a compact and versatile system designed for generating and measuring magnetic fields according to international EMC standards. With its integrated high-power amplifier and flexible configuration, it ensures precise and legally compliant testing for industries including automotive, avionics, military, and medical electronics.

Key Features:

• Frequency range: DC to 250 kHz
• Field strengths up to 1000 A/m (with Helmholtz coils)
• Integrated 800 W high-power amplifier
• Supports ISO 11452-8, EN 55103, DO-160, MIL-STD-461 and more
• Three independent modules: signal generator, power amplifier, spectrum analyzer
• Self-calibration and calibration modes with Helmholtz coils
• Fully automatic testing with optional triaxial coil
• Wide range of compatible accessories

The Model 3180 PXI Amplifier is a high voltage, wideband signal amplifier designed for PXI systems that demand more power and performance. Delivering up to 180Vp-p output with selectable gain and strong current drive, it solves common voltage limitations found in PXI environments.

Key Features

• Single width PXI card format
• High voltage output up to 180Vp-p ±90V
• Output current up to 150mA
• Large signal bandwidth up to 300kHz
• Small signal bandwidth up to 1MHz
• Slew rate up to 120V per microsecond
• Selectable gain up to x50
• Compatible with Tabor waveform generators
• Integrated safety latch and high voltage switch
• Red visual indicator for high voltage status

The Model 3201 RF Amplifier is a high frequency, high power single channel amplifier in a compact PXIe form factor. Operating from 100kHz to 20GHz, it delivers up to 30dBm output power into 50Ω, making it an ideal power extension solution for advanced RF and microwave applications.

Key Features

• Wide bandwidth from 100kHz to 20GHz
• Up to 30dBm saturated output power
• +27dBm typical output power at P1dB
• Single slot PXIe module
• Designed for 50Ω systems
• Reverse polarity protection
• Over voltage and under voltage protection
• Cascade capability for up to 25dB gain
• Compact and cost effective RF solution
• Compatible with Tabor waveform and RF generators

The Model 3202 RF Amplifier is a high frequency, high power dual channel amplifier built in a compact single slot PXIe form factor. Operating from 100kHz to 20GHz and delivering up to 30dBm output power into 50Ω, it provides reliable and stable RF amplification for demanding test environments.

Key Features

• Wide bandwidth from 100kHz to 20GHz
• Dual channel RF amplification
• Up to 30dBm saturated output power
• +27dBm typical output power at P1dB
• Cascade channels for up to 25dB gain
• Single slot PXIe module
• Designed for 50Ω systems
• Reverse polarity protection
• Over voltage and under voltage protection
• Compatible with Tabor waveform and RF generators

The Model 3222 Signal Amplifier is a 3U single slot PXI power amplifier designed for clean and stable signal amplification from DC to over 20MHz. With up to 40Vp p output into high impedance and flexible configuration options, it solves common PXI voltage limitations while maintaining exceptional signal purity.

Key Features

• 3U single width PXI card
• Wideband operation from DC to over 20MHz
• High output amplitude up to 40Vp p into high impedance
• Up to 20Vp p into 50Ω
• Fixed gain x10 standard
• Custom gain configuration available
• Low distortion and high signal purity
• Configurable input and output impedance
• Configurable output polarity
• Floating or grounded signal option up to 250Vdc
• Draws current only from +5V rail

The Model 9160 Signal Amplifier is a high bandwidth, high current single channel amplifier built for demanding signal amplification tasks. Designed in a compact 2U half 19 inch rack metal enclosure, it provides powerful output, fast transition time, and stable performance for laboratory and industrial environments.

Key Features

• 45MHz wide bandwidth
• 34Vp-p output into 50Ω
• Up to 1A peak output current
• Continuous power output up to 10W
• Fast transition time under 10ns
• Low distortion signal amplification
• Custom gain options x10, x15, x20
• Configurable input impedance 50Ω, 75Ω, 1MΩ
• DC or AC coupling options
• Rear auxiliary and DC offset inputs
• Rack mount compatible 2U half 19 inch design

The Model 9250 Signal Amplifier is a high-performance 30MHz differential and dual-channel amplifier designed for precision, flexibility, and high-voltage wide bandwidth applications. Built in a compact 2U half 19 inch rack metal enclosure, it is ideal for laboratory benches and rack-mounted systems.

Key Features

• Dual-channel or differential configuration
• Large signal bandwidth up to 15MHz
• Small signal bandwidth up to 30MHz
• Output amplitude up to 40Vp-p into high impedance
• Slew rate up to 200V per microsecond
• Low distortion signal amplification
• Custom gain options from x10 to x20
• Configurable input impedance: 50Ω, 75Ω, 1MΩ
• Configurable output impedance: 50Ω, 75Ω, 600Ω
• DC or AC coupling options
• Stackable design compatible with Tabor instruments
• Rack mount ready with optional 19 inch kit

The Model A10150 Signal Amplifier is a compact, high speed 150MHz single channel amplifier designed for low distortion and precise signal boosting. With ultra fast transition time and strong output capability, it is the perfect companion for high frequency signal sources that require additional voltage drive.

Key Features

• 150MHz wide bandwidth
• Up to 16Vp-p into 50Ω standard
• Optional 20Vp-p into 50Ω configuration
• Fast transition time under 1.8ns
• DC coupled wideband design
• Low distortion signal amplification
• Compact all metal enclosure
• Standard gain x5
• Optional gain x10
• Ideal snap on accessory for Tabor WaveXciter and WS8351 or WS8352 models
• Standalone compatible with any signal source

The Model A10160 Signal Amplifier is a compact, high current 45MHz single channel amplifier built for high voltage and wide bandwidth signal amplification. Designed with a small footprint and rugged metal enclosure, it delivers powerful output and fast signal transitions for demanding laboratory and industrial environments.

Key Features

• 45MHz wide bandwidth
• 34Vp-p output into 50Ω
• Peak output current up to 1A
• Continuous current up to 750mA
• Continuous power up to 7.5W and peak power up to 10W
• Fast transition time under 10ns
• DC coupled wideband architecture
• Custom gain options x10, x15, x20
• Compact all metal enclosure
• Compatible snap on accessory for Tabor WaveXciter and WS8351 or WS8352
• Standalone operation with any signal source

MOL2000T Fiber Optic Link 80 Hz – 3.5 GHz with Gain and Sleep Feature delivers secure, high-performance analog signal transmission in demanding RF and EMC applications.

Key Features:

• Wide bandwidth: 80 Hz to 3.5 GHz
• Remote-controlled gain: -62.5 dB to +24 dB (0.5 dB steps)
• Automatic optical level control for stable performance
• High immunity to electric fields (up to 500 kV/m, MIL-STD 461 RS105)
• Built-in test pulse generator for link verification
• Long-distance transmission up to 1 km
• Compact & lightweight: 380 g per unit
• Battery-powered with 40-hour autonomy and sleep mode
• Flexible control with FibREmote software (PC & Android)
• Rugged RF and optical connectors for durability

Key Features:

• Wide bandwidth: DC to 25 MHz for accurate signal transmission
• Dual-channel design with two independent inputs
• High EMI immunity up to 500 kV/m (MIL-STD 461 RS105)
• Remote-selectable attenuation: 1:1, 10:1, 100:1
• Galvanic isolation for safe operation in high-voltage environments
• Long-distance optical transmission up to 1 km
• Battery-powered with 20+ hour autonomy and sleep mode
• Remote configuration via FibREmote software for PC & Android

The MOL3000 Analog Optical Link is a high-performance transmission system designed for EMC and RF applications. It ensures reliable, interference-free signal transfer even in harsh electromagnetic environments, making it an essential tool for industries including defense, aerospace, power, and research.

Key Features:

• Wide frequency bandwidth: 80 Hz to 3.5 GHz
• Automatic optical level control for stable performance
• High immunity to external electric fields (>500 kV/m)
• Lightweight and compact: 99 x 64 x 41 mm, 350 g per unit
• Flexible power options with 40-hour battery autonomy
• Long-distance transmission up to 1 km
• Rugged RF (SMA) and optical (FC/APC) connectors
• Supplied with transmitter, receiver, chargers, and carrying case

• Three or four high performance outputs each with full functionality
• Range switching gives variable voltage/current combinations
• Shared power mode provides double power from a single output
• Low output noise and ripple via linear final regulation
• High setting resolution of up to 1mV and 0.1mA
• Variable OVP and OCP trips on all outputs which can be linked (MX-Q Series 2 units only)
• Individual or combined output on/off control with programmable delay sequencing.
• Selectable voltage tracking (isolated tracking)
• Selectable current meter averaging
• Switchable remote sense capability
• Graphic LCD (colour on Series 2) provides simultaneous output metering
• Numeric or spin-wheel control of all parameters
• 50 setting memories per output plus 50 linked memories
• 3U rack case for bench or rack mounting (4U rack kit accessory available)
• RS-232, USB and LAN (LXI) interfaces (P models)
• GPIB option (P models only)
• Duplicate power & sense terminals at rear (P models)
• Software control from Test Bridge software (free download – P models only)

Series 2 (“S2”) models add:

• Colour display
• Enhanced channel power sharing
• ‘TripLink’ feature: Link channels to trip together on OVP or OCP
• New MX103Q SELV Model

The NGPS Power Supply is a high stability digital power supply series designed for demanding industrial and scientific applications. Delivering up to 10 kW of output power and scalable up to 40 kW through parallel operation, this advanced system provides precise current and voltage control with exceptional temperature stability. Equipped with Gigabit Ethernet connectivity, an embedded web server, waveform generation capability and a built in oscilloscope, the NGPS Power Supply offers a powerful and flexible solution for laboratories, research facilities and high performance power systems.

Key Features

• High stability digital power supply with output power up to 10 kW
• Parallel operation capability allowing up to 40 kW system power
• Precise current and voltage control using advanced digital architecture
• Temperature stabilized internal section for extremely low drift
• High speed 10/100/1000 Mbit Ethernet communication
• Ultra fast SFP interface supporting update rates up to 100 kHz
• Embedded Linux operating system with web based configuration interface
• Built in Arbitrary Waveform Generation for custom signal control
• Integrated four channel oscilloscope for real time monitoring
• Remote sensing terminals for accurate voltage control at the load
• Optional analog control input for compatibility with legacy systems
• Low noise and high efficiency performance for demanding applications

Opto Fiber-Optic Automotive Link Overview

Key Features:

• Designed for reliable automotive communication and EMC testing
• Wide range of supported protocols: CAN, LIN, FlexRay, SPI, SENT, A2B, PSI5, K-Line, and more
• Automotive Ethernet options with Marvell, Broadcom, and NXP chipsets
• High-speed data transfer (up to 20 MS/s for SENT, 10 Mbit/s for FlexRay, 1 Gbit/s for Ethernet)
• Flexible integration: standalone shielded cases or 19” rack-mounted receivers
• Ideal for use in anechoic chambers and EMC-compliant environments
• Partnered with MK-Messtechnik GmbH for proven quality and performance