Description
The Arbitrary Waveform Generator Unit U8793 is a plug-and-play module for the Hioki Memory HiCorder to create a function generator, arbitrary waveform generator, and waveform measurement in a single device. Easily observe waveforms while varying test conditions, such as changing the signal’s amplitude and frequency as well as programming various waveforms to output in order.
Key Features
• Output arbitrary waveform signals up to 2 channels
• Output problematic waveforms recorded with the Memory Hicorder up to 15 V
• Output customized arbitrary waveforms signals up to 15 V
• For use with Hioki Memory Hicorder series (cannot use with 8847 or MR8847)
• Built-in function generator and sweep function • Isolated between unit and output, and between all channels
Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)
| Output terminal | Number of channels: 2, SMB terminal (Output impedance: 1 Ω or less) Max. rated voltage to ground: 33 V rms AC or 70 V DC |
|---|---|
| Output voltage range | -10 V to 15 V (Amplitude setting range: 0 V to 20 V p-p, Setting resolution: 1 mV) |
| Max. output current | 10 mA (Allowable load resistance: 1.5 kΩ or more) |
| Function generator | DC, Sine wave, Square wave, Pulse wave, Triangular wave, Ramp wave, Output frequency: 0 Hz to 100 kHz |
| Arbitrary waveform generator mode | Waveforms measured by MR8847A, etc., generated by Hioki Model 7075 or SF8000, CSV waveforms D/A refresh rate: 2 MHz (using 16-bit D/A) |
| Sweep function | Frequency, Amplitude, Offset, Duty (Pulse only) |
| Program function | Max. 128 steps (Number of loops for each step, Number of total loops) |
| Other | Self-test function (Voltage), External input/output control |
| Dimensions and mass | 106 mm (4.17 in) W × 19.8 mm (0.78 in) H × 196.5 mm (7.74 in) D, 250 g (8.8 oz) |
| Accessories | None |
Reviews
There are no reviews yet!