Products

The Aim-TTi LDH400 Series DC Electronic Load offers a powerful and precise solution for direct testing of DC power sources, converters, and PFCs. Designed for high-voltage applications, it combines advanced features, intuitive control, and reliable performance in a compact form factor.

Key Features:

• Wide voltage range: 10V to 500V and current up to 16A
• 400W continuous power dissipation at 28°C (360W at 40°C)
• Operates in constant current, resistance, conductance, and power modes
• High accuracy and resolution for precise level settings
• Built-in transient generator with adjustable slew rates
• Variable drop-out voltage ideal for battery and power testing
• Graphical LCD with easy soft-key interface
• Front and rear input terminals for flexible connectivity
• Remote control via USB, RS232, and LXI-compliant LAN
• Optional GPIB interface available
• Rated to CAT II (300V) safety standards

Teledyne Test Tools Milli Ohm Meter offers high-precision low-resistance measurement with advanced drive modes, temperature compensation, and fast sampling.

Key Features:

• 50,000-count high-resolution display
• 3.5″ TFT LCD (320×240)
• 0.05% measurement accuracy
• 1 Amp test current with 0.1 μΩ resolution
• Fast 60 readings per second
• Four-wire measurement method
• Temperature compensation and delayed measurement
• 20-panel memory settings
• Dry circuit testing (T3MIL50X only)
• USB, RS-232C, and EXT I/O interfaces
• Multiple drive modes: DC+, DC-, Pulsed, PWM (T3MIL50X)

• Three or four high performance outputs each with full functionality
• Range switching gives variable voltage/current combinations
• Shared power mode provides double power from a single output
• Low output noise and ripple via linear final regulation
• High setting resolution of up to 1mV and 0.1mA
• Variable OVP and OCP trips on all outputs which can be linked (MX-Q Series 2 units only)
• Individual or combined output on/off control with programmable delay sequencing.
• Selectable voltage tracking (isolated tracking)
• Selectable current meter averaging
• Switchable remote sense capability
• Graphic LCD (colour on Series 2) provides simultaneous output metering
• Numeric or spin-wheel control of all parameters
• 50 setting memories per output plus 50 linked memories
• 3U rack case for bench or rack mounting (4U rack kit accessory available)
• RS-232, USB and LAN (LXI) interfaces (P models)
• GPIB option (P models only)
• Duplicate power & sense terminals at rear (P models)
• Software control from Test Bridge software (free download – P models only)

Series 2 (“S2”) models add:

• Colour display
• Enhanced channel power sharing
• ‘TripLink’ feature: Link channels to trip together on OVP or OCP
• New MX103Q SELV Model

Key Features

• Supports wafers up to 200 mm (optional 300 mm upgrade)
• Operates at cryogenic temperatures down to 10 K
• Semi-automated with optional full automation via autoloader
• Compatible with liquid nitrogen, liquid helium, or cryo-cooler
• Ice- and condensation-free probing for stable performance
• Up to eight probe positioners or probe card integration
• Solid vibration-isolated frame for precision measurements
• Velox software with intuitive alignment and automation

The Aim-TTi PL Series DC Power Supply combines precision, flexibility, and reliability in a compact linear regulated design. Available in single, dual, and triple output configurations, it delivers exceptional control and accuracy for laboratory, R&D, and testing environments.

Key Features:

• Single, dual, or triple output models
• Voltage range from 6V/8A to 60V/1.5A
• High-performance linear regulation for low noise
• Compact and space-saving design
• True analog controls for smooth operation
• S-Lock function to instantly lock settings
• V-Span feature to customize voltage range
• Low current measurement and meter averaging
• Selectable remote sense terminals
• Independent, Isolated Tracking, and True Parallel modes
• High current, low voltage output on triple models
• Optional interfaces: RS-232, USB, LAN (LXI), and GPIB
• Analog remote control of voltage and current (single output only)

Key Features

• Entry-level manual wafer probing in vacuum < 1×10⁻⁴ mbar
• Supports wafers up to 150 mm or single dies
• Up to six probe positioners for flexible testing
• Optional thermal chuck from -60°C to +300°C
• Probing possible with open chamber lid at atmosphere
• Stable, vibration-isolated frame for precise results
• Ergonomic design with hinged topside lid for easy access
• Independent control of chuck stage and positioners
• Fast, manual step-and-repeat wafer testing

Cascade PM300 – 300 mm Analytical Probe Station

Key Features:

• Industry benchmark for manual wafer probing and failure analysis.
• Superior mechanical stability with granite base for precision and repeatability.
• High-precision probe positioning with independent X-Y coarse and fine adjustments.
• Configurable for DC, RF, mmW, WLR, FA, and 3D IC testing.
• Wide thermal range: -60°C to +200°C (PM300PS) / +15°C to +300°C (PM300).
• Optional electromagnetic shielding (PM300PS) for ultra-low-noise environments.
• Spacious, ergonomic design supporting up to 12 positioners.
• Upgradeable platform to support future testing needs.

Experience precision RF signal analysis on the go with this lightweight, handheld analyzer designed for both lab and field use.

Key Features:

• Frequency range: 1MHz to 1.3GHz (PSA1303) or 2.7GHz (PSA2703)
• RBW: 300Hz to 10MHz
• -115dBm typical noise floor
• Dual markers with absolute/difference values
• AM/FM demodulation in zero span
• Auto-find & smart marker peak tracking
• USB for waveform saving and PC connection
• Live, View, and Reference trace modes
• 6-hour lithium-ion battery operation
• Weighs just 0.58 kg
• Optional U01 Upgrade: Limit lines, data logging, triggering, compensation tables

High-performance, battery-powered spectrum analyzers ideal for RF engineers and field use.

Key Features:

• Frequency range: 10MHz to 3.6GHz or 6.0GHz
• -120dBm typical noise floor
• Resolution bandwidths from 300Hz to 10MHz
• AM/FM audio demodulation with zero span
• Live, View & Reference traces with markers
• Smart marker tracking with peak detection
• USB data logging & real-time PC view
• Compact, lightweight (0.56 kg) with >3hr battery
• Optional U02 features: limit lines, OBW, ACPR, AM/FM waveform demodulation

• Wide range of voltage/current combinations
• Up to 80V and up to 50A within the same power envelope
• Low output ripple and noise of <3mV rms at full power
• High setting resolution of 1mV
• Analogue control interfaces for voltage and current
• Bench or rack mounting, front and rear terminals
• USB and LAN (LXI) interfaces with GPIB optional (QPX600DP, QPX1200SP and QPX750SP)

T3AFG Series – Waveform Generators from Teledyne Test Tools combine precision, speed, and flexibility with advanced DDS technology for high-quality signal generation.

Key Features:

• Models available with 30 MHz to 500 MHz bandwidth
• Dual-channel output with 20 Vpp amplitude
• Max sampling rate up to 2.4 GSa/s
• 14-bit or 16-bit vertical resolution (model-dependent)
• 4.3″ responsive touchscreen display
• 196 built-in arbitrary waveforms
• Supports AM, FM, PM, PSK, FSK, ASK, PWM, Sweep, Burst, Harmonic
• USB Host, USB Device, LAN VXI-11 standard interfaces
• Optional IQ modulation support (on high-end models)
• True waveform combination and flexible phase/channel control

T3AWG3K Series – Waveform Generators deliver high-definition, multi-channel precision for engineers who demand signal quality, flexibility, and performance.

Key Features:

• Models available with 250 MHz or 350 MHz sinewave frequency
• 2, 4, and 8 analog channel configurations
• 16-bit vertical resolution for high signal fidelity
• Max sampling rate of 1.2 GS/s
• Output voltage window up to ±24 V (into High Impedance)
• 128 Mpts/channel memory (upgradeable to 1 Gpts/channel)
• True Arbitrary Mode and Direct Digital Synthesis (DDS)
• Add 8, 16, or 32 digital patterns synchronized with analog output
• Ideal for mixed-signal testing, high-voltage waveform generation, and multi-domain R&D

T3DMM Series – Digital Multimeters deliver precision, speed, and display-rich features, ideal for professional labs, R&D, and production testing.

Key Features:

• Available in 4.5-digit (60,000 counts) and 6.5-digit (2,200,000 counts) models
• True RMS AC voltage and current measurement
• 4.3” TFT-LCD with 480×272 resolution
• Multiple display modes: Number, Histogram, Trend Chart, Bar Meter, Statistics
• Advanced math functions: Max, Min, Avg, Std Dev, dBm/dB, Relative, Pass/Fail
• Supports remote operation via USB, LAN, SCPI commands
• Built-in cold terminal thermocouple compensation
• Wide range of measurements: Voltage, Current, Resistance, Capacitance, Frequency, Period, Temperature
• Internal 1GB storage and USB host for external data access
• User-friendly softkey interface and built-in help system

T3PS Series – Power Supplies by Teledyne Test Tools deliver precision, flexibility, and control in a compact form for both lab and industrial use.

Key Features:

• Programmable and non-programmable options with up to 4 independent outputs
• Wide voltage and current ranges up to 60 V / 200 A / 1520 W
• Multiple display types: TFT LCD, dual numeric, high-resolution panels
• Output modes: Constant Voltage (CV), Constant Current (CC), Constant Resistance (CR)
• Low ripple and fast transient response: ≤1 mVrms, ≤50 µs
• Built-in series/parallel tracking, electronic load modes, and remote sense terminals
• Interfaces: USB, LAN, RS-232, RS-485, Analog Control, Ext I/O
• Advanced features: OVP, OCP, UVL, programmable slew rates, panel lock
• Ideal for use in automotive, mobile, defense, research labs, and education

The Teledyne T3SA Series Spectrum Analyzers deliver high-performance signal analysis from 9 kHz to 3.2 GHz in a compact, easy-to-use design. Ideal for R&D, education, production, and pre-compliance testing, it features a large touchscreen and advanced digital IF technology.

Key Features:

• All Digital IF technology10.1”
• WVGA (1024 x 600) touchscreen display
• Frequency range from 9 kHz to 3.2 GHz
• -161 dBm/Hz displayed average noise level (typical)
• -98 dBc/Hz @ 10 kHz offset phase noise (typical)
• Total amplitude accuracy < 0.7 dB
• 1 Hz minimum resolution bandwidth (RBW)
• Built-in preamplifier for improved sensitivity

Typical Applications

● Research Laboratory
● Development Laboratory
● Repair and Maintenance
● Calibration Laboratory
● Automatic Production Test
● General bench-top use

Teledyne Test Tools T3DAQ1-16 is a powerful 16-channel Data Acquisition Unit, perfect for R&D and production testing environments.

Key Features:

• 16-channel input (12 multi-purpose + 4 current)
• Built on a 6½ digit digital multimeter platform
• Wide range of electrical measurements: voltage, current, resistance, capacitance, frequency
• True-RMS accuracy for AC voltage and current
• Large 4.3″ TFT LCD with dual-display views
• Display modes: Histogram, Trend, Bar Graph, Statistics, or Number
• USB Host, USB Device, and LAN connectivity
• Cold terminal thermocouple compensation
• Softkey interface for intuitive navigation