Products

EMC1150 Low Noise Preamplifier (9 kHz – 1 GHz, 50 dB Gain)

Key Features:

• Wide frequency range: 9 kHz to 1 GHz
• High gain performance: 50 dB minimum
• Low noise figure: 1.8 dB typical, 2.5 dB max
• Excellent EMI measurement capability
• Improves system noise floor flatness
• High linearity and dynamic range
• Unconditionally stable operation
• Built-in AC input power with grounding detect circuit
• Compact, lightweight design (2.8 kg)
• Optional pulse/ESD protector available

EMC118A45SE Low Noise Preamplifier | 1–18 GHz, 45 dB Gain

Key Features:

• Wide 1–18 GHz frequency range for versatile EMI testing
• High 45 dB gain with flatness across the band
• Low noise figure (3.5–8 dB max) for improved sensitivity
• Compensates long cable loss for accurate EMI measurements
• Unconditionally stable with high linearity and dynamic range
• Built-in grounding detect circuit for reliable operation
• Compact design with 50-ohm SMA female connectors
• Available in multiple versions with mounting options

Key Features:

• Wide frequency range: 18–40 GHz
• 40 dB minimum gain with ±4.5 dB flatness
• 5 dB maximum noise figure for accurate EMI testing
• Compensates for long cable loss in EMI measurements
• Enhances system noise floor flatness
• High linearity LNA for EMI compliance applications
• High dynamic range and unconditionally stable
• Built-in AC input power supply with grounding detect circuit
• Rugged 2.92 mm female connectors for reliability
• Versions: Bench model and mast-mount with clamp & power supply

The EMC184040SE is a high-performance low noise preamplifier designed for EMI measurements across 18–40 GHz. With 40 dB gain and a 5 dB noise figure, it ensures reliable, stable, and accurate performance for demanding EMC testing environments.

Key Features:

• Wide frequency range: 18–40 GHz
• 40 dB minimum gain with ±4.5 dB flatness
• 5 dB noise figure for low-noise operation
• Compensates for long cable losses in EMI measurements
• High linearity and dynamic range for precise testing
• Unconditionally stable design
• Available in multiple mounting versions (bench, tube clamp, box clamp)

EMCview PC Software Pre-Compliance Testing

Key Features:

• Easy-to-use software for radiated and conducted emissions testing.
• Pre-configured project files for CISPR-xx (EN550xx) standards and automotive EMC standards.
• Built-in amplitude correction for cables, LISNs, TEM cells, antennas, amplifiers, and probes.
• Supports spectrum analyzers from Rigol, Siglent, and R&S (FPC/FPH series).
• Dual measurement runs with Average/Quasi-Peak or Peak/Quasi-Peak modes.
• Fast Quasi-Peak scan of critical frequencies for efficient troubleshooting.
• Configurable limit lines, margins, and correction files.
• Automatic test reports and versatile import/export functions.
• Ideal for in-house EMC testing, design validation, and cost reduction.

The EME Wide is a professional wideband field meter designed to monitor and record electromagnetic field (EMF) exposure with accuracy and reliability.

Key Features:

• Frequency range: 0.1 MHz – 6.5 GHz
• Tri-axial probe ensures maximum isotropy in measurements
• Measures isotropic and single-axis (X, Y, Z) field values
• Supports RMS, maximum, and time/spatial averaging
• Selectable units: V/m, A/m, W/m²
• Built-in alarm with programmable thresholds
• Large 2.8” LCD display with LED backlight
• Stores up to 20,000 measurement points in non-volatile memory
• Rechargeable AA NiMH battery with external wall charger
• Compliance with 2013/35/EU Directive, ICNIRP, FCC 96-326, and Safety Code 6

A high-precision robotic EMC scanning solution designed for pre- and post-compliance testing. With 0.2 mm resolution and advanced 3D envelope scanning, it helps engineers diagnose and solve EMC/EMI problems quickly and effectively.

Key Features:

• Frequency coverage from 9 kHz to 18 GHz
• Ultra-fine spatial resolution down to 0.2 mm
• Robotic arm with customizable size for large and complex boards
• Supports off-the-shelf hand-held probes for flexible testing
• 3D envelope scanning for precise component-level analysis
• EMViewer software with spectral and spatial scan, reporting, and limit lines
• Reduces EMC diagnostic and design cycle times significantly
• Ideal for automotive, aerospace, military, and high-density PCB designs

EMScanner: 150 kHz – 8 GHz High-Frequency EMC Desktop Scanner

Key Features:

• Wide frequency coverage from 150 kHz to 8 GHz
• 3.5 mm effective spatial resolution for precise diagnostics
• Real-time spectral and spatial scans with peak-hold and comparison features
• Reduces testing time by over 100x and design cycle times by up to 50%
• Supports emission, immunity, EMI shielding, and broadband noise testing
• Compact, lightweight, and designed for high-speed, high-density PCB projects
• EMViewer Software for advanced scan visualization, reporting, and analysis
• Compatible with leading spectrum analyzers, supporting multiple formats and overlays

EMScannerR: 150 kHz – 8 GHz, up to 0.06 mm Resolution EMC Desktop Scanner

Key Features:

• Frequency coverage from 150 kHz to 8 GHz for complete diagnostics
• Ultra-high spatial resolution down to 0.06 mm across 8 levels
• Real-time spectral and spatial scanning with peak-hold and comparison tools
• Supports JPEG overlays, Gerber RS274x, and HPGL formats
• Reduces testing time by 100x and design cycle times by up to 50%
• Identifies hot spots, current loops, and unintended radiators instantly
• Designed for high-speed, high-density PCB projects across multiple industries
• EMViewer Software with 3D views, live overlays, and advanced reporting

EMSCOPE-RX2, 9kHz – 110MHz, 2 Channel Receiver

Key Features:

• FFT-based dual-channel EMI receiver compliant with CISPR 16-1-1.
• Supports Peak, Quasi-Peak, and Average detectors.
• Covers 9 kHz – 110 MHz with CISPR and MIL bandwidth filters.
• Enables simultaneous Line and Neutral measurements with three detectors (6 results at once).
• Real-time Common-Mode and Differential-Mode analysis for filter design.
• Compact, lightweight (5.5 kg), and integrates all functions in one box.
• Embedded software with free updates, pre-set EMC settings, and auto report generation.
• Supports automotive, IT, industrial, medical, military, wireless, and power sectors.

EMSCOPE-RX4, 9 kHz – 110 MHz, 4 Channel Receiver for 3 Phase

Key Features:

• Quad-channel receiver for complete EMI measurements up to 110 MHz
• FFT-based dual-channel receiver according to CISPR 16-1-1
• Peak, Quasi-Peak, and Average detectors
• Resolution bandwidth filters: 200 Hz, 9 kHz, 120 kHz (CISPR), 1 kHz, 10 kHz (MIL)
• Fastest receiver in the market with 6 simultaneous measurements
• Supports common- and differential-mode modal measurements
• Compact, lightweight design with integrated pre-amp and pulse limiter
• Software included with real-time results, waterfall function, and auto compliance reports

A compact and flexible semi-automated wafer probe system designed for RF/DC modeling, device characterization, and advanced measurement needs.

Key Features:

• Mechanical platen lift for safer RF set-ups and reduced operator errors
• Fully compatible with Autonomous RF/DC measurement assistants and Velox Dash™ app
• Reconfigurable platen inserts (TopHat, PCH, IceShield) for versatile test configurations
• Spacious platen design supporting RF and DC setups with ease
• Compact footprint with field-upgradable components
• Integrated Low-Volume MicroChamber and FemtoGuard thermal triaxial chuck

The FAST-Bi-1K5 Power Supply is a high precision bipolar, bidirectional and regenerative digital power supply designed for demanding testing environments. Built in a compact 19 inch 2U form factor, it supports four quadrant operation and provides output ratings up to ±100 V and ±150 A. With advanced digital control, embedded monitoring tools and energy regenerative architecture, this power supply offers an efficient solution for battery testing, EV systems, fuel cells and laboratory research applications.

Key Features

• 1.5 kW bipolar bidirectional regenerative power supply
• Four quadrant operation across the voltage current plane
• Output ratings up to ±100 V and ±150 A
• Multiple regulation modes including CV, CC, CP and CR
• High precision 24 bit resolution at 100 kHz sampling rate
• Built in Arbitrary Waveform Generator operating at 100 kHz
• Integrated 4 channel oscilloscope for signal monitoring
• Embedded web server interface for remote control and configuration
• Gigabit Ethernet connectivity with TCP IP and UDP communication
• Energy regenerative architecture returning excess power to the grid
• Low noise and ripple due to high switching frequency design
• Parallel operation of up to four units for increased power capability

The FAST-PS Power Supply is a high performance bipolar digital power supply series designed for fast and precise current and voltage control. With power ratings up to 600 W, this advanced unit combines digital control technology with built in waveform generation, signal monitoring and flexible communication interfaces. The integrated web server and powerful control architecture make the FAST-PS Power Supply an ideal solution for laboratories, research facilities and demanding industrial applications.

Key Features

• High performance bipolar digital power supply with power ratings up to 600 W
• Precise current and voltage control modes for flexible operation
• Built in Arbitrary Waveform Generator operating at 100 kHz
• Integrated four channel oscilloscope with advanced triggering features
• Embedded Linux operating system with web based user interface
• High speed Ethernet connectivity with 10/100/1000 Mbit communication
• Dual SFP or SFP+ communication slots for fast feedback control
• Digital control loop for precise response and load adaptation
• Local display and interface for monitoring voltage and current
• Integrated protection including over voltage, over current and over temperature
• Optional analog control input for amplifier compatibility

The FAST-PS-1K5 Power Supply is a high performance bipolar digital power supply designed for demanding laboratory, industrial and research applications. Delivering up to 1.5 kW of output power, this advanced system provides precise current and voltage control along with integrated monitoring tools and flexible communication interfaces. With digital control architecture, built in web server functionality and high stability sensing technology, the FAST-PS-1K5 Power Supply offers a reliable solution for battery testing, superconducting magnet systems and advanced power electronics applications.

Key Features

• High performance bipolar digital power supply with power ratings up to 1.5 kW
• Accurate current and voltage control for precision power applications
• Output models available up to 100 A and 100 V
• Digital control loop for flexible configuration and load adaptation
• Integrated web server for monitoring and system configuration
• Built in waveform generation and triggering capabilities
• Four channel oscilloscope monitoring at 100 ksps
• High precision current sensing using 0 FLUCS DCCT technology
• Gigabit Ethernet connectivity with additional SFP communication slots
• Optional four quadrant operation with dedicated external crate
• Quench protection support for superconducting magnet systems
• Local display and interface for monitoring voltage and current

The FAST-PS-M Power Supply is a high performance monopolar digital power supply designed for applications that require stable current and voltage control. With output power up to 900 W, this advanced power system integrates a digital control loop, embedded web server and built in waveform and monitoring tools. Its high precision sensing technology and fast communication interfaces make the FAST-PS-M Power Supply an ideal solution for research laboratories, industrial test systems and precision electronics applications.

Key Features

• High performance monopolar digital power supply with output power up to 900 W
• Precise current and voltage control with digital regulation
• Built in Arbitrary Waveform Generator operating at 100 ksps
• Integrated four channel oscilloscope with high precision monitoring
• Embedded web server interface for configuration and control
• High speed Ethernet connectivity with 10/100/1000 Mbit support
• Dual SFP communication slots for fast feedback and system integration
• Low noise output and high bandwidth performance
• High precision sensing using 0 FLUCS current transducer technology
• Local colour display and interface for monitoring and configuration
• Internal protections including over voltage and over current protection
• Optional analog control input for amplifier compatibility