Products

Precision, performance, and scalability packed into a high-efficiency DC power solution. Ideal for demanding test environments and energy recovery.

Key Features:

• Output voltage: 0–240 V DC
• Scalable from 27 kW to 2000+ kW
• Modular build: up to 44 connected units
• Full sink/source operation with regeneration
• Ultra-fast switching: rise/fall time <250 µs
• Accuracy: <0.02% FS with high-res current range
• Auto-ranging capability (factor of 3)
• Control modes: CV, CC, CP, CR, Ri-Sim
• Seamless waveform generation via AnyWave + WaveMaster
• Optional HMI touchscreen and CAN interface

Precision meets performance in this regenerative, modular, and highly controllable DC power supply for high-voltage testing applications.

Key Features:

• Output voltage: 0 to 3000 V DC
• Power range: 54 to 2000+ kW
• Fast response: <250 µs rise/fall times
• Regenerative sink/source operation
• High current accuracy: <0.02% FS
• Auto-ranging voltage-current flexibility (factor 3)
• Full digital modes: CV, CC, CP, CR, Ri-Sim
• Modular design with up to 44 units
• Optional HMI touchscreen and CAN interface
• Waveform generation via AnyWave + WaveMaster

High-speed, modular AC power supply with precision control and full regeneration. Perfect for grid simulation, HIL testing, and EMC validation.

Key Features:

• Power scalable from 30 kVA to 1050+ kVA
• Voltage range: 0–305 V AC with 4 active outputs
• True 4-quadrant regenerative design for energy efficiency
• Ultra-fast switching time (≤200 µs response)
• High current accuracy <0.02% full scale
• Full digital control modes: CV, CC, CP, CR, Ri-Sim
• Programmable grid simulator, AC amplifier, or electronic RLC load
• Compatible with AnyWave & WaveMaster for custom waveform control
• Modular 19” rack-mounted units with low heat and noise output
• Ideal for automotive, aerospace, HIL, EMC, and renewable power testing

The 3110A Standards Waveform Generator is a feature-rich, intuitive tool for engineers conducting EMC testing. From automotive to aviation applications, this unit simplifies the most complex test routines.

Key Features:

• 3,400+ Built-In Tests for automotive and industry standards
• Fast Rise Time: 3 µs full-scale with up to 1 MHz bandwidth
• Segment-Based Waveform Creation for custom sequences
• Free Lifetime Standards Updates
• Automated Triggering via GPIO or LAN
• Flexible Output Control including frequency, amplitude, and DC offset
• Extremely Precise Resolution: 0.01 Hz frequency, 76 µV amplitude
• Supports All Common Waveforms: Sine, square, triangle, DC, ripple, and more

The Tabor 3180 PXI Amplifier is a high-voltage, wideband PXI signal amplifier designed to boost your waveform generator output with precision and safety. Capable of delivering up to 180Vp-p with a 150mA output current, it supports large signal bandwidths up to 300kHz and small signal bandwidths up to 1MHz. The 3180 features selectable gain, a fast 120V/µs slew rate, and a safety latch with visual indicators to ensure secure operation. Compact and cost-effective, this PXI card integrates seamlessly into PXI test systems, providing reliable high-voltage amplification for automotive, defense, aviation, and industrial applications.

Key Features

• Single-width PXI slot design
• High-voltage output: up to 180Vp-p (±90V)
• Output current up to 150mA
• Large signal bandwidth up to 300kHz
• Small signal bandwidth up to 1MHz
• Fast slew rate: 120V/µs
• Selectable gain configuration (up to x50)
• Compatible with Tabor waveform generators
• Safety latch and visual indicator for high-voltage operations
• Compact, cost-effective PXI solution for versatile applications

A precision-driven, regenerative DC power supply ideal for high-demand testing environments across industries.

Key Features:

• Voltage range: 0 to 320 V DC
• Power output: 36 to 2000+ kW
• Modular and scalable up to 44 units
• Regenerative sink and source operation
• Voltage rise/fall time <250 µs
• Accuracy <0.02% FS with high-res current range
• Auto-ranging factor of 3
• Full digital control: CV, CC, CP, CR, Ri-Sim
• Supports AnyWave + WaveMaster waveform control
• Optional touchscreen HMI and CAN interface

The Tabor 3201 PXIe RF Amplifier is a high-frequency, high-power RF amplifier designed to extend the output of PXIe-based signal sources. Operating from 100 kHz to 20 GHz, it delivers up to +30dBm power into 50Ω, making it ideal for demanding RF, multi-tone, and general electronics applications. Its compact single-slot PXIe design supports cascading for up to 25 dB gain. Equipped with reverse polarity and over/under-voltage protection, the 3201 ensures safe, reliable operation in laboratory and industrial setups.

Key Features

• PXIe single-slot form factor
• Ultra-wide bandwidth: 100 kHz to 20 GHz
• High output power: +30dBm typ. @ P1dB
• Cascade channels for up to 25 dB gain
• Reverse polarity protection
• Over/under-voltage protection
• Ideal for RF, multi-tone, and scientific applications
• Compact and cost-effective solution
• Compatible with Tabor waveform and RF signal generators

The Tabor 3202 PXIe RF Amplifier is a high-power, dual-channel RF amplifier designed for PXIe systems, operating from 100 kHz to 20 GHz. It provides up to +30dBm output into 50Ω and allows channel cascading for up to 25 dB gain, making it ideal for high-frequency, multi-tone, and demanding RF applications. Equipped with reverse polarity and over/under-voltage protection, the 3202 ensures safe and reliable amplification in laboratory and industrial environments.

Key Features

• PXIe single-slot dual-channel form factor
• Ultra-wide bandwidth: 100 kHz to 20 GHz
• High output power: +30dBm typical @ P1dB
• Cascade channels for up to 25 dB gain
• Reverse polarity protection
• Over/under-voltage protection
• Ideal for RF, multi-tone, and scientific applications
• Compact and cost-effective solution
• Compatible with Tabor waveform and RF signal generators

The Tabor 3222 PXIBus Amplifier is a high-performance PXI-based signal amplifier designed for precise, high-voltage signal amplification. Operating from DC up to 20 MHz, it delivers up to 40Vp-p into high impedance with extremely low distortion. The 3222 supports customizable gain, input/output impedance, polarity, and floating or grounded operation, making it ideal for automotive, aviation, and general laboratory applications.

Key Features

• Single-width PXI card, 3U form factor
• Wideband range: DC to 20 MHz
• High amplitude: 40Vp-p into high impedance
• Extremely low distortion
• Fixed x10 gain, custom gain available
• Configurable input/output impedance and polarity
• Floating or grounded signal operation
• Efficient PXI power usage with +5V only draw
• Compact and cost-effective solution for PXI systems

The Hioki 3269 Power Supply is a four-channel unit designed to provide stable power to Hioki flat bandwidth AC/DC current probes, including the 3273-50 to 3276 series, CT6700, and CT610 series. It enables accurate current measurement output for Memory HiCorders, oscilloscopes, and other data acquisition instruments.

Key Features

• Supplies power to Hioki current probes 3273-50 to 3276, CT6700, CT610 series
• Four-channel power output for multi-probe setups
• Compatible with Memory HiCorders and oscilloscopes
• Output voltage: ±12 V ±0.5 V, maximum 2.5 A (total of all channels)
• Compact and lightweight design: 80 × 119 × 200 mm, 1.1 kg
• Wide AC input range: 100–240 V AC, 50/60 Hz, 170 VA max
• Simple integration into data acquisition setups
• Note: Requires compatible current sensor to operate

The Hioki 3272 Power Supply is a single-channel unit designed to provide stable power to Hioki 3270 Series AC/DC clamp-on probes and CT6700 series sensors. It ensures accurate current signal output for Memory HiCorders, oscilloscopes, and other general-purpose instruments.

Key Features

• Compatible with Hioki 3273-50, 3274, 3275, 3276, and CT6700 series probes
• Single-channel power supply for precise current measurement
• Supports Memory HiCorders, oscilloscopes, and recorders
• Output voltage: ±12 V ±0.5 V, 600 mA total
• Compact size: 73 × 110 × 186 mm, weight 1.1 kg
• AC input options: 100/120/220/240 V, 50/60 Hz, 20 VA max
• Comes with power cord, instruction manual, and spare fuse
• Cannot be used alone; requires compatible current probe

The Hioki 3273-50 Clamp On Probe is a high-performance wideband current probe designed for oscilloscopes and Memory HiCorders. It captures transient and steady-state current waveforms from 10 mA to 30 A with excellent fidelity. Its advanced design allows accurate observation of low currents even near high-current lines.

Key Features

• Wideband DC to 50 MHz waveform observation
• High S/N characteristics for 10 mA order currents
• Direct BNC connection to oscilloscope or Memory HiCorder
• High-permeability magnetic shield reduces electric field interference
• Supports transient current measurement in power supplies, inverters, and motor controllers
• Paired zero-flux method and thin-film Hall elements for precise wideband measurement
• Optional Power Supply 3269/3272 for stable operation

The Hioki 3274 Clamp On Probe is a high-precision wideband current sensor designed for capturing transient and steady-state currents in industrial applications. With a DC to 10 MHz bandwidth and continuous current handling up to 150 A, this probe is ideal for waveform observation with oscilloscopes and Memory HiCorders.

Key Features

• Wideband waveform observation from DC to 10 MHz
• Measures currents up to 150 A continuously
• Handles peak currents up to 500 A (short pulse)
• Direct BNC connection to oscilloscope or Memory HiCorder
• High permeability magnetic shield minimizes interference
• Ideal for inverters, motors, and power supply measurements
• Optional Power Supply 3269/3272 for continuous operation
• Compact and portable design with carrying case included

The Hioki 3275 Clamp On Probe is a high-performance wideband current sensor engineered for accurate waveform capture with oscilloscopes and Memory HiCorders. Designed for environments with high-voltage switching or magnetic interference, it measures currents up to 500 A with DC to 2 MHz bandwidth.

Key Features

• Wideband waveform observation from DC to 2 MHz
• Measures currents up to 500 A continuously
• Direct BNC connection to oscilloscope or Memory HiCorder
• Electrostatic shield minimizes interference from nearby fields
• Zero-flux and Hall element detection for precise measurement
• Ideal for inverters, motors, and high-voltage switching equipment
• Optional Power Supply 3269/3272 for continuous operation

The Hioki 3276 Clamp On Probe is a high-performance wideband current sensor designed for accurate waveform measurement with oscilloscopes and Memory HiCorders. It captures transient and steady-state currents from 10 mA to 30 A with high fidelity, making it ideal for advanced electronics applications.

Key Features

• Wideband waveform observation from DC to 100 MHz
• High S/N ratio for 10 mA order current measurement
• Direct BNC connection to oscilloscope or Memory HiCorder
• High-permeability magnetic shield reduces interference
• Captures transient currents in power supplies, inverters, and motor controllers
• Low insertion loss minimizes derating from sensor heating
• Compatible with optional Power Supply 3269/3272 for stable operation

The Tabor 3322 PCIBus Amplifier is a high-performance PCI-based signal amplifier built for precision high-voltage amplification. It operates from DC up to 20 MHz, providing up to 40Vp-p into high impedance with ultra-low distortion. The 3322 supports configurable gain, input/output impedance, polarity, and floating or grounded operation, making it ideal for automotive, aerospace, and laboratory applications.

Key Features

• Single-slot, 3U PCI card
• Wideband range: DC to 20 MHz
• High amplitude: 40Vp-p into high impedance
• Extremely low distortion
• Fixed x10 gain, customizable without signal degradation
• Configurable input/output impedance and polarity
• Floating or grounded signal operation up to 250VDC
• Efficient PCI power usage with +5V only draw
• Compact and cost-effective solution for PCI systems