PRODUCTS
TMetrix carries the following test and measurement products:
SERVICES
Explore our range of technical support and calibration services:
1 800 665 7301 | info@tmetrix.com

About Us | Events | Support | Resource Centre | Line Card | News | Blog | Contact Us

Products

  • CHEMICAL IMPEDANCE ANALYZER IM3590
    CHEMICAL IMPEDANCE ANALYZER IM3590 - 2
    Quick View
    HIOKI E E CORPORATION CHEMICAL IMPEDANCE ANALYZER IM3590

    A high-performance analyzer designed for R&D applications involving electrochemical components, materials, batteries, and EDLCs. It enables precise impedance measurements essential for advanced evaluation and development.

    Key Features:

    • Wide frequency range: 1 mHz to 200 kHz for detailed ion and solution behavior analysis
    • Dual function: High-speed continuous LCR and sweep measurements with one device
    • Battery analysis: Measures internal impedance under no-load conditions
    • Ultra-fast sweep: Perform measurements in as little as 2 ms
    • High accuracy: ±0.05% basic precision for reliable R&D and testing
    • Advanced analysis: Supports Cole-Cole plots and equivalent-circuit modeling for electrochemical studies
    Learn More
  • EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000
    EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000
    Quick View
    HIOKI E E CORPORATION EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000

    An advanced firmware upgrade for the IM3570 that enables quick and accurate equivalent circuit analysis, ideal for in-depth component evaluation and quality control.

    Key Features:

    • Automatically selects the optimal equivalent circuit model from five typical options
    • Minimizes discrepancies between measured and ideal frequency characteristics
    • Determines acceptance/rejection of L, C, and R elements with precision
    • Evaluates resonance sharpness (mechanical quality coefficient)
    • Enables detailed analysis of piezoelectric elements and inductors through resonance
    Learn More
  • IMPEDANCE ANALYZER IM7580A
    IMPEDANCE ANALYZER IM7580A - 2
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM7580A

    The Hioki IM7580A is a compact, high-speed impedance analyzer for 1 MHz to 300 MHz testing, ideal for both production and R&D. It works seamlessly with the IM9201 SMD fixture for reliable component testing.

    Key Features:

    • 1 MHz to 300 MHz frequency range
    • 0.5 ms test speed
    • ±0.72% basic accuracy
    • Compact half-rack size with palm-sized test head
    • Reliable contact check functions
    • Frequency, level, and time sweeps in Analyzer Mode
    • RF I-V method for precise measurement
    Learn More
  • IMPEDANCE ANALYZER IM7581
    IMPEDANCE ANALYZER IM7581 - 2
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM7581

    The Hioki IM7581 is a compact, high-speed impedance analyzer designed for accurate testing from 100 kHz to 300 MHz. It’s ideal for both production and development environments.

    Key Features:

    • 100 kHz to 300 MHz frequency range
    • 0.5 ms fastest test speed
    • ±0.72% basic accuracy
    • Compact half-rack size, palm-sized test head
    • Reliable contact check via DCR, Hi-Z reject, or waveform judgment
    • Supports frequency, level, and time sweeps in Analyzer Mode
    • Uses RF I-V method for precise measurement
    Learn More
  • Impedance Analyzer IM7587 3 GHz
    Impedance Analyzer IM7587 3 GHz
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM7587 3 GHz

    The Hioki Impedance Analyzer IM7587 3 GHz provides precision, speed, and versatility for impedance measurements from 1 MHz to 3 GHz, ideal for both R&D and mass production applications in electronic component testing.

    Key Features:

    • Frequency range: 1 MHz to 3 GHz
    • Test speed: 0.5 ms
    • Measurement variability: 0.07%
    • Basic accuracy: ±0.65% reading
    • RF I-V measurement technique
    • Compact half-rack design with palm-sized test head
    • Robust contact check capabilities
    • Analyzer mode: frequency and level sweeps, time interval measurements
    Learn More
  • AGX Regenerative AC & DC Power Source
    AGX Regenerative AC & DC Power Source
    Quick View
    Pacific Power Source Inc. AGX Series: All-in-One Regenerative AC & DC Power Source

    Applications:

    • Aerospace & Defense – Avionics, MIL-STD-704, EMC compliance, 400Hz & wild frequency testing
    • EV Charging & V2G/V2H Testing – On-board chargers, grid-tied inverters, smart grid simulation
    • Energy Storage & Renewable Systems – Home ESS, solar PV/grid-tied inverter testing
    • Industrial Power Simulation – Frequency conversion, harmonic analysis, transient simulations
    • Smart Grid & Compliance Testing – IEC 61000, RTCA DO-160, IEEE 1547, and more

     

    Learn More
  • RGS Series: Regenerative Grid Simulator frm TMetrix in Canada
    Quick View
    Pacific Power Source Inc. Regenerative Grid Simulator RGS Series

    High-Power 4-Quadrant AC & DC Power Source with Load Option

    • Powerful & Versatile: 12kVA / kW to 21kVA / kW in a 4U chassis. Parallel units up to 168kVA/kW (single cabinet)or 252kVA/kW (dual cabinet).
    • Multi-Phase Flexibility: Supports single-phase, split-phase, and three-phase configurations with AC, DC, or AC+DC output.
    • Grid Simulation & Compliance Testing: Emulates real-world power grid conditions, simulating disturbances, harmonics, and interharmonics for accurate renewable energy testing (solar inverters, EV charging, microgrid, and UPS applications).
    • Regenerative Efficiency: Over 90% energy recovery back to the grid reduces power consumption and operational costs.
    • Advanced Control & Monitoring: SmartSource Suite enables remote control via an intuitive web browser interface with LAN, USB, GPIB, and RS232 connectivity.

     

    Learn More
  • GZS Series | Regenerative Grid Simulator | TMetrix | Canada
    Quick View
    Pacific Power Source Inc. Regenerative Grid Simulator with PHIL – GSZ Series

    High-Power 4-Quadrant AC & DC Power Source

    • High Power Density: Available in 30kVA/kW, 45kVA/kW, and 55kVA/kW models, with parallel cabinets scaling up to 550kVA/kW.
    • Versatile Output Capability: AC, DC, or AC+DC modes in single-phase, split-phase, or three-phase configurations.
    • Dual Constant Power Voltage Ranges:
      • AC Voltage: 0-240V L-N / 0-415V L-L & 0-480V L-N / 0-830V L-L
      • DC Voltage: 0-340Vdc & 0-680Vdc
    • Grid Compliance Testing: Meets global standards like IEEE 1547, UL 1741, IEC 61000-3, IEC 61000-4
    • Regenerative Power Efficiency: >90% energy recovery back to the grid, reducing power waste and operational costs
    • PHIL Interface for Hardware-in-the-Loop (HIL) Testing: High-speed analog I/O for real-time frequency, voltage, and current control.
    • SmartSource Suite for Remote Testing: Web-based real-time monitoring and control via LAN, USB, GPIB, and RS232.

     

    Learn More
  • RLS Series_ Regenerative AC_DC Load Simulator
    Quick View
    Pacific Power Source Inc. Regenerative AC/DC Load Simulator – RLS Series

    4-Quadrant Programmable Load with Energy Recovery

    • Powerful & Scalable: 6kVA/kW to 21kVA/kW in a compact 4U chassis. Parallel units up to 168kVA/kW per cabinet or 252kVA/kW in dual cabinets.
    • Versatile Load Simulation: AC and DC load capability with single-phase, split-phase, and three-phase configurations.
    • Grid-Ready Compliance Testing: Supports IEEE 1547, UL 1741, IEC 61000-3, IEC 61000-4 compliance testing.
    • Energy-Efficient Regeneration: Returns over 90% of absorbed power back to the grid, reducing operational costs.
    • Dynamic Load Emulation: Simulates linear and non-linear loads, harmonics, transient conditions, and waveform distortions.
    • High-Speed Smart Control: SmartSource Suite for real-time test automation and remote monitoring.

     

    Learn More
  •
    Quick View
    Pacific Power Source Inc. Regenerative Electronic Load – ELZ Series

    High-Power AC/DC Load Simulator with PHIL Interface

    • Scalable Power Density: Available in 30kVA/kW, 45kVA/kW, and 55kVA/kW models, with parallel cabinets up to 550kVA/kW.
    • Versatile AC/DC Load Capability: Supports single-phase, split-phase, three-phase, and multi-channel configurations.
    • Dual Constant Power Voltage Ranges:
      • AC Voltage: 5-220V L-N / 9-380V L-L & 5-440V L-N / 9-760V L-L
      • DC Voltage: 0-335Vdc & 9-650Vdc
    • Advanced PHIL Interface (Option H): High-speed analog I/O for real-time frequency, voltage, and current control.
    • Regenerative Power Efficiency: Returns over 90% of absorbed energy back to the grid, reducing operational costs & heat dissipation.
    • Dynamic Load Simulation: Simulates harmonics, transient conditions, and waveform distortions for real-world power testing.
    • SmartSource Suite for Remote Control: Web-based monitoring and test automation via LAN, USB, GPIB, and RS232.

     

    Learn More
  • 3334 AC/DC Power Meter Product Image from TMetrix
    Quick View
    HIOKI E E CORPORATION 3334 AC/DC Power Meter USD $ 2,498.00

    Single Phase Power Meter Compatible with DC Measurement and Current/Power Integration Measurement

    Key Features:

    • Compatible with the SPECpower® (*1) benchmarking for server power consumption
    • DC measurement mode, AC, and AC+DC measurement
    • Integration function for current and power
    • ±0.1% high basic accuracy (*2) For complete details, please refer to the specifications)
    • Extended period of guaranteed accuracy of 3 years
    • Complete accuracy over a wide input range

     

    Learn More
  • EME Guard Plus - Continuous EMF Safety Monitor
    EME Guard Plus - Continuous EMF Safety Monitor
    Quick View
    Microwave Vision Group (MVG) EME Guard Plus – Continuous EMF Safety Monitor

    The EME Guard Plus is a lightweight and robust personal protection monitor designed to ensure the safety of workers operating near electromagnetic field (EMF) emitters such as antennas, radars, and base stations. With a frequency range of 1 MHz to 40 GHz, this device continuously monitors and records EMF exposure levels while providing immediate audio, visual, and vibrating alerts when exposure exceeds predefined safety thresholds. Customizable alarm settings and a triaxial isotropic probe ensure accurate and reliable measurements.

     

    Learn More
  • Radar Safety EMF Monitor | EME Guard XS
    Radar Safety EMF Monitor | EME Guard XS
    Quick View
    Microwave Vision Group (MVG) EME Guard XS – Radar Safety EMF Monitor

    The EME Guard XS Radar is a state-of-the-art RF safety monitor, specifically designed for workers operating near radar transmitters and antennas. With its isotropic tri-axis E-field sensors, this compact device provides continuous EMF monitoring over a frequency range of 1 MHz to 40 GHz, including short pulsed signal detection. Equipped with audio and visual alarms, it alerts users instantly when EMF exposure exceeds predefined safety thresholds, creating a safer working environment for military, aviation, and telecom personnel.

     

    Learn More
  • EME Guard XS 71 GHz - High-Frequency EMF Monitor
    EME Guard XS 71 GHz - High-Frequency EMF Monitor
    Quick View
    Microwave Vision Group (MVG) EME Guard XS 71 GHz – High-Frequency EMF Monitor

    Solutions For:

    •  Accurate measurement with tri-axis sensors
    • Instant audio and visual alarm
    • Robust, reliable and user-friendly
    • Covers 5G / 6G bands, measuring up to 71 GHz

    User profile:

    • Persons working near antennas including installation and maintenance workers, broadcast, PMR and mobile phone operators or regulatory body employees

    Measurement capabilities:

    • Continuous monitoring of Electromagnetic Field levels with isotropic tri-axis E-field sensors
    • EMF Level indicated by a LED color scale
    • Audio and visual alarms triggered when EMF exceeds the reference level
    Learn More
  • 3280-20F Rugged AC Clamp Meter
    3280-20F Rugged AC Clamp Meter
    Quick View
    HIOKI E E CORPORATION Hioki 3280-20F Rugged AC Clamp Meter

    Key Features:

    • Measure even harmonic waveform components using the True RMS method
    • Expanded -25°C to 65°C operating temperature range
    • Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires
    • Drop proof design withstands drop from a height of 1 meter

     

    Learn More
  • CM4141-50 AC Clamp Meter
    CM4141-50 AC Clamp Meter-2 product image from TMetrix in Canada
    Quick View
    HIOKI E E CORPORATION Hioki CM4141-50 AC Clamp Meter USD $ 294.14
    • CAT IV 600 V, CAT III 1000 V
      When using P2000: CAT III 2000 V, CAT IV 1000 V
    • Easily get into tight spaces between cables thanks to thin sensor with a minimum cross-section span of 11 mm
    • Measure up to 2000 A AC
    • AC A, AC and DC V, DC+AC V, resistance, frequency, and more
    • Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross or to an Excel® file (*1)
    • Harmonic analysis from 1st to 30th order with GENNECT Cross (*1)

     

    Learn More