PRODUCTS
TMetrix carries the following test and measurement products:
SERVICES
Explore our range of technical support and calibration services:
1 800 665 7301 | info@tmetrix.com

About Us | Events | Support | Resource Centre | Line Card | News | Blog | Contact Us

Products

  • 7548 Linear Amplifier
    7548 Linear Amplifier
    Quick View
    AE Techron 7548 Linear Amplifier

    The 7548 Linear Amplifier is a high-output, low-noise solution engineered for precision and reliability in demanding environments.

    Key Features:

    • Up to 100 Ap / 195 Vp output
    • Delivers 12,000W peak power for 40 ms
    • Supports continuous 5,500W output into 1Ω load
    • Operates from DC to 100 kHz bandwidth
    • Field-selectable current or voltage mode
    • Ideal for MIL-STD-704F three-phase testing
    • Stackable for 800 Vp or 170 Ap system output
    • Built-in protection against over-voltage, over-temp, and overload
    • Intuitive LCD display and status indicators

     

    Learn More
  • 7796HC Linear Powerm Amplifier - 1
    Quick View
    AE Techron 7796HC Linear Power Amplifier

    7796HC Linear Power Amplifier – High Current DC & AC Precision

    Key Features:

    • Output up to 85A continuous, 200A in-rush current
    • Frequency response: DC to 100+ kHz
    • Four-quadrant operation: source and sink
    • Field-selectable voltage or current modes
    • Stable with resistive, inductive, and capacitive loads
    • Multiple protections: Over/under voltage, current, and temperature
    • Supports DC ripple, surge, dropout, and ground noise simulations
    • Ideal for high-current DC Conducted Immunity testing
    • LCD with real-time voltage and current metrics
    • Supports both balanced and unbalanced inputs

     

    Read more
    Learn More
  •
    Quick View
    AE Techron Aetec 7794 Amplifier

    Aetec 7794 High Current Industrial Amplifier

    Key Features:

    • Up to 200 Ap / 100 Vp; DC to 150 kHz bandwidth
    • Stable with resistive, inductive, or capacitive loads
    • Controlled-voltage or controlled-current operation
    • Switchable rail supply for optimized load impedance
    • 60A continuous output at 13.8V DC
    • ±95V DC and >35 V/µs slew rate
    • Four-quadrant operation: sourcing and sinking
    • Extensive protection against overvoltage, overcurrent, overtemperature
    • Rack-mountable chassis with LCD fault diagnostics

     

    Learn More
  • AE Techron 7796 Amplifier - 1
    Quick View
    AE Techron AETechron 7796 Amplifier

    AETechron 7796 Amplifier – High-Current, Low-Impedance Industrial Power
    Ideal for precision testing, EMC simulations, and MRI systems.

    Key Features:

    • Delivers over 200 Ap peak current, up to ±180V
    • DC to 100 kHz bandwidth for versatile signal reproduction
    • Four-quadrant operation (source/sink modes)
    • Operates in both voltage and current-controlled modes
    • Handles in-rush currents up to 200A
    • Field-configurable rail supply modes for load optimization
    • Advanced protection against voltage, current, and thermal faults
    • Stackable for higher voltage or current (up to 800 Ap)

     

    Learn More
  • MEMORY HiCORDER MR6000
    Quick View
    HIOKI E E CORPORATION MEMORY HiCORDER MR6000 USD $ 15,210.78

    The Hioki MR6000 Memory HiCorder sets a new benchmark in waveform recording, combining cutting-edge technology, intuitive design, and world-class performance. Built from the ground up, it’s engineered to tackle both current and future measurement challenges with ease and precision.

    Key Features:

    • Large, intuitive touch panel for efficient and user-friendly operation
    • Simultaneous multi-channel isolation measurement at up to 200 MS/s (with High Speed Analog Unit U8976)
    • Significantly faster data saving for a seamless experience
    • Real-time data saving without interrupting ongoing measurements
    Learn More
  • MEMORY HiCORDER MR8741 - 1
    Quick View
    HIOKI E E CORPORATION MEMORY HiCORDER MR8741 USD $ 6,710.59

    The Hioki Rack-mounted Multi-channel System Recorder (MR8741/MR8740) is a powerful, high-speed, single-device solution for waveform recording and generation. Ideal for test systems, it offers high-resolution, isolated multi-channel measurements with fast sampling capabilities.

    Key Features:

    • Integrated waveform recording and generation in one device
    • Equipped with DVM Unit MR8990 for high-accuracy 24-bit resolution measurements
    • Supports up to 16 channels (MR8741) for multi-channel testing
    • Isolated input between channels and from input to chassis (up to 300 V AC/DC)
    • High-speed sampling up to 20 MS/s
    • Compact rack-mountable design (4U height, under 180 mm depth)
    • Monitor display and setting access via DVI-D and mouse
    • Enables remote measurement and control via LAN
    • Browser-based screen monitoring or advanced control via Hioki 9333 LAN Communicator
    Learn More
  • MEMORY HiCORDER MR8827 - 1
    MEMORY HiCORDER MR8827 - 2
    Quick View
    HIOKI E E CORPORATION MEMORY HiCORDER MR8827 USD $ 11,073.17

    The Hioki Memory Recorder is a high-speed, fully-isolated data acquisition system designed for precise and simultaneous measurement of multiple analog and logic signals. Ideal for testing, simulation, and system diagnostics, it combines waveform generation and recording in one powerful unit.

    Key Features:

    • Generate and record waveforms using a single device
    • Simulate issues by outputting previously recorded problematic waveforms to test devices
    • Supports 32 analog + 32 logic channels, expandable to 28 analog + 64 logic channels
    • High-speed sampling up to 20 MS/s with fully isolated inputs
    • Ensures safe measurement with complete analog input isolation
    • Equipped with a large-capacity 512M-word memory
    • Simultaneously measures high voltage and ultra-low voltage system signals

     

    Learn More
  • Data Acquisition Unit
    Data Acquisition Unit
    Quick View
    Teledyne LeCroy Teledyne T3DAQ1-16 Data Acquisition Unit

    Teledyne Test Tools T3DAQ1-16 is a powerful 16-channel Data Acquisition Unit, perfect for R&D and production testing environments.

    Key Features:

    • 16-channel input (12 multi-purpose + 4 current)
    • Built on a 6½ digit digital multimeter platform
    • Wide range of electrical measurements: voltage, current, resistance, capacitance, frequency
    • True-RMS accuracy for AC voltage and current
    • Large 4.3″ TFT LCD with dual-display views
    • Display modes: Histogram, Trend, Bar Graph, Statistics, or Number
    • USB Host, USB Device, and LAN connectivity
    • Cold terminal thermocouple compensation
    • Softkey interface for intuitive navigation
    Learn More
  • AGX Regenerative AC & DC Power Source
    AGX Regenerative AC & DC Power Source
    Quick View
    Pacific Power Source Inc. AGX Series: All-in-One Regenerative AC & DC Power Source

    Applications:

    • Aerospace & Defense – Avionics, MIL-STD-704, EMC compliance, 400Hz & wild frequency testing
    • EV Charging & V2G/V2H Testing – On-board chargers, grid-tied inverters, smart grid simulation
    • Energy Storage & Renewable Systems – Home ESS, solar PV/grid-tied inverter testing
    • Industrial Power Simulation – Frequency conversion, harmonic analysis, transient simulations
    • Smart Grid & Compliance Testing – IEC 61000, RTCA DO-160, IEEE 1547, and more

     

    Learn More
  • AFX Series: AC & DC Power Source
    Quick View
    Pacific Power Source Inc. AFX Series: High Power, Energy-Efficient AC & DC Power Source

    Applications

    • Aerospace & Avionics – Frequency conversion (400Hz & wild frequency testing), MIL-STD compliance
    • EV Charging & Power Electronics – On-board chargers (OBC), V2G/V2H testing, battery simulation
    • Renewable Energy Systems – Solar PV/grid-tied inverter testing, home ESS & smart grid simulations
    • Power Supply & Industrial Testing – AC/DC power supply evaluation, network server & data center testing
    • Research & Development Labs – High-frequency power testing, compliance verification, transient simulations

     

    Learn More
  •
    Quick View
    Pacific Power Source Inc. ADF Series: High-Performance Programmable AC Power Source

    Applications

    • Aerospace & Avionics Testing – 400Hz & wild frequency (360Hz-800Hz) compliance
    • EV Charging & Power Electronics – AC/DC conversion, V2G, V2H, and OBC testing
    • Renewable Energy & Smart Grid – Solar PV inverters, energy storage & grid simulation
    • Industrial Power & Manufacturing – AC power supply testing, production line QA
    • R&D & Compliance Labs – IEC61000, MIL-STD-704, RTCA DO-160 testing
    • Railway Power Systems – 16.6Hz & 400Hz frequency compliance

     

    Learn More
  • RGS Series: Regenerative Grid Simulator frm TMetrix in Canada
    Quick View
    Pacific Power Source Inc. Regenerative Grid Simulator RGS Series

    High-Power 4-Quadrant AC & DC Power Source with Load Option

    • Powerful & Versatile: 12kVA / kW to 21kVA / kW in a 4U chassis. Parallel units up to 168kVA/kW (single cabinet)or 252kVA/kW (dual cabinet).
    • Multi-Phase Flexibility: Supports single-phase, split-phase, and three-phase configurations with AC, DC, or AC+DC output.
    • Grid Simulation & Compliance Testing: Emulates real-world power grid conditions, simulating disturbances, harmonics, and interharmonics for accurate renewable energy testing (solar inverters, EV charging, microgrid, and UPS applications).
    • Regenerative Efficiency: Over 90% energy recovery back to the grid reduces power consumption and operational costs.
    • Advanced Control & Monitoring: SmartSource Suite enables remote control via an intuitive web browser interface with LAN, USB, GPIB, and RS232 connectivity.

     

    Learn More
  • RLS Series_ Regenerative AC_DC Load Simulator
    Quick View
    Pacific Power Source Inc. Regenerative AC/DC Load Simulator – RLS Series

    4-Quadrant Programmable Load with Energy Recovery

    • Powerful & Scalable: 6kVA/kW to 21kVA/kW in a compact 4U chassis. Parallel units up to 168kVA/kW per cabinet or 252kVA/kW in dual cabinets.
    • Versatile Load Simulation: AC and DC load capability with single-phase, split-phase, and three-phase configurations.
    • Grid-Ready Compliance Testing: Supports IEEE 1547, UL 1741, IEC 61000-3, IEC 61000-4 compliance testing.
    • Energy-Efficient Regeneration: Returns over 90% of absorbed power back to the grid, reducing operational costs.
    • Dynamic Load Emulation: Simulates linear and non-linear loads, harmonics, transient conditions, and waveform distortions.
    • High-Speed Smart Control: SmartSource Suite for real-time test automation and remote monitoring.

     

    Learn More
  •
    Quick View
    Pacific Power Source Inc. Regenerative Electronic Load – ELZ Series

    High-Power AC/DC Load Simulator with PHIL Interface

    • Scalable Power Density: Available in 30kVA/kW, 45kVA/kW, and 55kVA/kW models, with parallel cabinets up to 550kVA/kW.
    • Versatile AC/DC Load Capability: Supports single-phase, split-phase, three-phase, and multi-channel configurations.
    • Dual Constant Power Voltage Ranges:
      • AC Voltage: 5-220V L-N / 9-380V L-L & 5-440V L-N / 9-760V L-L
      • DC Voltage: 0-335Vdc & 9-650Vdc
    • Advanced PHIL Interface (Option H): High-speed analog I/O for real-time frequency, voltage, and current control.
    • Regenerative Power Efficiency: Returns over 90% of absorbed energy back to the grid, reducing operational costs & heat dissipation.
    • Dynamic Load Simulation: Simulates harmonics, transient conditions, and waveform distortions for real-world power testing.
    • SmartSource Suite for Remote Control: Web-based monitoring and test automation via LAN, USB, GPIB, and RS232.

     

    Learn More
  • AcoustiQuiet Sound Dampening Rack Mount Cabinets
    AcoustiQuiet Sound Dampening Rack Mount Cabinets
    Quick View
    Karis Tech AcoustiQuiet Sound Dampening Cabinets
    • Superior Noise Reduction – Attenuates up to 24 dBA, making it perfect for quiet office environments.
    • Efficient Cooling – Six ultra-quiet fans expel up to 3 kW of thermal heat.
    • Flexible Installation – Available in 24U, 35U, and 44U heights with 36” and 42” depths.
    • Durable Construction – Made from 12-gauge US-finished steel with a maximum load capacity of 2,000 lbs.
    • Comprehensive Security – Key lockable front and rear doors, with optional locking side panels.
    • Acoustic Lined Panels – Fully lined with sound-absorbing material for maximum noise control.
    • Versatile Color Options – Available in 7 standard colors including Black, Pearl White, Granite, Platinum, White, Dark Grey, and Blue.
    • Complete Accessibility – Removable side panels for easy installation and maintenance.
    • Integrated Temperature Display – Real-time temperature monitoring with remote sensor support.
    • Cable Management – Bottom rear cable entry accommodates up to 500 CAT 5 cables.

    Learn More
  • EDGE 3 Soundproof Server Enclosure product image from ACA TMetrix Inc. in Canada.
    EDGE 3 Soundproof Server Enclosure
    Quick View
    Karis Tech EDGE 3 Soundproof Server Enclosure

    Ideal for:

    • Small & Medium Businesses – Deploy IT infrastructure without dedicated server rooms.
    • Edge Computing – Reduce latency and bandwidth strain with localized computing.
    • Secure Data Centers – Enhance equipment security & environmental control.

    With its compact footprint, advanced cooling, and soundproofing technology, the EDGE 3 enclosure offers a quiet, efficient, and scalable alternative to traditional server rooms.

    Learn More