Products

AIM-TTi 1908 Series – 5.5 Digit Dual Display Multimeter
High-performance, bench-top or portable multimeter for professional-grade precision and versatility.

Key Features:

• 5.5-digit resolution with dual display
• True RMS AC + frequency, capacitance & temperature measurements
• Dual measurement capability for parallel data monitoring
• USB standard (1908); USB, RS232, LAN/LXI on 1908P
• Optional GPIB interface (1908P)
• Powered by AC mains or internal rechargeable batteries
• High accuracy up to 0.02%, resolution down to 1µV and 0.1µA
• Ideal for both laboratory and field applications
• PC-Link software included for remote control and data logging

Key Features:

• Fully automated battery testing for large packs up to 300 V
• Simultaneous measurement of internal resistance (AC-IR) and open-circuit voltage (OCV)
• Wide resistance range: 3 mΩ to 3.1 kΩ with 0.1 μΩ resolution
• Voltage measurement ranges: 6 V, 60 V, and 300 V with high precision
• Equipped with LAN interface for production line integration
• Fast, accurate AC four-terminal method
• Resistant to static electricity (±30 kV contact discharge)
• Ideal for high-voltage pack inspection and quality control

Key Features:

• Fully automated battery testing for small cells and packs up to 60 V
• Simultaneous measurement of internal resistance (AC-IR) and open-circuit voltage (OCV)
• Wide resistance range: 0 Ω to 3.1 kΩ with 1 μΩ resolution
• Voltage measurement ranges: 6 V and 60 V with high precision
• Equipped with LAN interface for integration with production lines
• Rapid measurement using AC four-terminal method
• Highly resistant to static electricity (±30 kV contact discharge)

Hioki Digital Multimeter DT4282 is designed for professionals who demand high accuracy, reliability, and safety in every measurement.

Key Features:

• High-precision 60,000-count, 5-digit display for detailed readings.
• Exceptional ±0.025% DC voltage accuracy for laboratory-grade results.
• Wide AC voltage frequency range (20 Hz–100 kHz) for diverse applications.
• Built-in low-pass filter to eliminate high harmonic noise.
• Direct 10 A input ideal for high-current measurements.
• Dual display shows voltage and frequency simultaneously.
• Terminal shutter mechanism enhances operator safety.
• Rated CAT IV 600 V / CAT III 1000 V for secure operation in demanding environments.

The Hioki DT4261 Digital Multimeter is a professional-grade tool that enhances field analysis, safety, and efficiency. Built for electrical engineers and maintenance professionals, it combines exceptional measurement accuracy, advanced safety features, and wireless connectivity for smart data handling.

Key Features:

• True RMS measurement for accurate readings
• CAT IV 600 V / CAT III 1000 V safety rating
• Wireless connectivity with optional Z3210 adapter
• Excel® Direct Input Function for instant data transfer
• Terminal shutters prevent incorrect lead insertion
• Fuse check and automatic AC/DC voltage detection
• Harmonic measurement up to the 30th order with GENNECT Cross
• IP54 dust and water resistance
• Drop-proof design (1-meter concrete drop protection)
• Wide temperature range: -25°C to 65°C

Key Features:

• Industry-leading precision for OCV and AC-IR testing of EV battery cells
• Ultra-high resolution for advanced cell grading (down to 0.01 µΩ)
• Fast testing speeds with excellent reproducibility
• MIR mode enables parallel testing without interference
• Channel-specific correction and multiplexer support
• Reliable long-term system operation with route resistance monitoring
• Easy integration with existing systems (BT3562A command compatibility)
• Compact, lightweight design for lab or production lines

Experience precision RF signal analysis on the go with this lightweight, handheld analyzer designed for both lab and field use.

Key Features:

• Frequency range: 1MHz to 1.3GHz (PSA1303) or 2.7GHz (PSA2703)
• RBW: 300Hz to 10MHz
• -115dBm typical noise floor
• Dual markers with absolute/difference values
• AM/FM demodulation in zero span
• Auto-find & smart marker peak tracking
• USB for waveform saving and PC connection
• Live, View, and Reference trace modes
• 6-hour lithium-ion battery operation
• Weighs just 0.58 kg
• Optional U01 Upgrade: Limit lines, data logging, triggering, compensation tables

High-performance, battery-powered spectrum analyzers ideal for RF engineers and field use.

Key Features:

• Frequency range: 10MHz to 3.6GHz or 6.0GHz
• -120dBm typical noise floor
• Resolution bandwidths from 300Hz to 10MHz
• AM/FM audio demodulation with zero span
• Live, View & Reference traces with markers
• Smart marker tracking with peak detection
• USB data logging & real-time PC view
• Compact, lightweight (0.56 kg) with >3hr battery
• Optional U02 features: limit lines, OBW, ACPR, AM/FM waveform demodulation

T3DMM Series – Digital Multimeters deliver precision, speed, and display-rich features, ideal for professional labs, R&D, and production testing.

Key Features:

• Available in 4.5-digit (60,000 counts) and 6.5-digit (2,200,000 counts) models
• True RMS AC voltage and current measurement
• 4.3” TFT-LCD with 480×272 resolution
• Multiple display modes: Number, Histogram, Trend Chart, Bar Meter, Statistics
• Advanced math functions: Max, Min, Avg, Std Dev, dBm/dB, Relative, Pass/Fail
• Supports remote operation via USB, LAN, SCPI commands
• Built-in cold terminal thermocouple compensation
• Wide range of measurements: Voltage, Current, Resistance, Capacitance, Frequency, Period, Temperature
• Internal 1GB storage and USB host for external data access
• User-friendly softkey interface and built-in help system

The Teledyne T3SA Series Spectrum Analyzers deliver high-performance signal analysis from 9 kHz to 3.2 GHz in a compact, easy-to-use design. Ideal for R&D, education, production, and pre-compliance testing, it features a large touchscreen and advanced digital IF technology.

Key Features:

• All Digital IF technology10.1”
• WVGA (1024 x 600) touchscreen display
• Frequency range from 9 kHz to 3.2 GHz
• -161 dBm/Hz displayed average noise level (typical)
• -98 dBc/Hz @ 10 kHz offset phase noise (typical)
• Total amplitude accuracy < 0.7 dB
• 1 Hz minimum resolution bandwidth (RBW)
• Built-in preamplifier for improved sensitivity

Typical Applications

● Research Laboratory
● Development Laboratory
● Repair and Maintenance
● Calibration Laboratory
● Automatic Production Test
● General bench-top use

Applications:

• Aerospace & Defense – Avionics, MIL-STD-704, EMC compliance, 400Hz & wild frequency testing
• EV Charging & V2G/V2H Testing – On-board chargers, grid-tied inverters, smart grid simulation
• Energy Storage & Renewable Systems – Home ESS, solar PV/grid-tied inverter testing
• Industrial Power Simulation – Frequency conversion, harmonic analysis, transient simulations
• Smart Grid & Compliance Testing – IEC 61000, RTCA DO-160, IEEE 1547, and more

Applications

• Aerospace & Avionics – Frequency conversion (400Hz & wild frequency testing), MIL-STD compliance
• EV Charging & Power Electronics – On-board chargers (OBC), V2G/V2H testing, battery simulation
• Renewable Energy Systems – Solar PV/grid-tied inverter testing, home ESS & smart grid simulations
• Power Supply & Industrial Testing – AC/DC power supply evaluation, network server & data center testing
• Research & Development Labs – High-frequency power testing, compliance verification, transient simulations

Applications

• Aerospace & Avionics Testing – 400Hz & wild frequency (360Hz-800Hz) compliance
• EV Charging & Power Electronics – AC/DC conversion, V2G, V2H, and OBC testing
• Renewable Energy & Smart Grid – Solar PV inverters, energy storage & grid simulation
• Industrial Power & Manufacturing – AC power supply testing, production line QA
• R&D & Compliance Labs – IEC61000, MIL-STD-704, RTCA DO-160 testing
• Railway Power Systems – 16.6Hz & 400Hz frequency compliance

High-Power 4-Quadrant AC & DC Power Source with Load Option

• Powerful & Versatile: 12kVA / kW to 21kVA / kW in a 4U chassis. Parallel units up to 168kVA/kW (single cabinet)or 252kVA/kW (dual cabinet).
• Multi-Phase Flexibility: Supports single-phase, split-phase, and three-phase configurations with AC, DC, or AC+DC output.
• Grid Simulation & Compliance Testing: Emulates real-world power grid conditions, simulating disturbances, harmonics, and interharmonics for accurate renewable energy testing (solar inverters, EV charging, microgrid, and UPS applications).
• Regenerative Efficiency: Over 90% energy recovery back to the grid reduces power consumption and operational costs.
• Advanced Control & Monitoring: SmartSource Suite enables remote control via an intuitive web browser interface with LAN, USB, GPIB, and RS232 connectivity.

4-Quadrant Programmable Load with Energy Recovery

• Powerful & Scalable: 6kVA/kW to 21kVA/kW in a compact 4U chassis. Parallel units up to 168kVA/kW per cabinet or 252kVA/kW in dual cabinets.
• Versatile Load Simulation: AC and DC load capability with single-phase, split-phase, and three-phase configurations.
• Grid-Ready Compliance Testing: Supports IEEE 1547, UL 1741, IEC 61000-3, IEC 61000-4 compliance testing.
• Energy-Efficient Regeneration: Returns over 90% of absorbed power back to the grid, reducing operational costs.
• Dynamic Load Emulation: Simulates linear and non-linear loads, harmonics, transient conditions, and waveform distortions.
• High-Speed Smart Control: SmartSource Suite for real-time test automation and remote monitoring.

High-Power AC/DC Load Simulator with PHIL Interface

• Scalable Power Density: Available in 30kVA/kW, 45kVA/kW, and 55kVA/kW models, with parallel cabinets up to 550kVA/kW.
• Versatile AC/DC Load Capability: Supports single-phase, split-phase, three-phase, and multi-channel configurations.
• Dual Constant Power Voltage Ranges:
  • AC Voltage: 5-220V L-N / 9-380V L-L & 5-440V L-N / 9-760V L-L
  • DC Voltage: 0-335Vdc & 9-650Vdc
• Advanced PHIL Interface (Option H): High-speed analog I/O for real-time frequency, voltage, and current control.
• Regenerative Power Efficiency: Returns over 90% of absorbed energy back to the grid, reducing operational costs & heat dissipation.
• Dynamic Load Simulation: Simulates harmonics, transient conditions, and waveform distortions for real-world power testing.
• SmartSource Suite for Remote Control: Web-based monitoring and test automation via LAN, USB, GPIB, and RS232.