PRODUCTS
TMetrix carries the following test and measurement products:
SERVICES
Explore our range of technical support and calibration services:
1 800 665 7301 | info@tmetrix.com

About Us | Events | Support | Resource Centre | Line Card | News | Blog | Contact Us

Products

  • CHEMICAL IMPEDANCE ANALYZER IM3590
    CHEMICAL IMPEDANCE ANALYZER IM3590 - 2
    Quick View
    HIOKI E E CORPORATION CHEMICAL IMPEDANCE ANALYZER IM3590

    A high-performance analyzer designed for R&D applications involving electrochemical components, materials, batteries, and EDLCs. It enables precise impedance measurements essential for advanced evaluation and development.

    Key Features:

    • Wide frequency range: 1 mHz to 200 kHz for detailed ion and solution behavior analysis
    • Dual function: High-speed continuous LCR and sweep measurements with one device
    • Battery analysis: Measures internal impedance under no-load conditions
    • Ultra-fast sweep: Perform measurements in as little as 2 ms
    • High accuracy: ±0.05% basic precision for reliable R&D and testing
    • Advanced analysis: Supports Cole-Cole plots and equivalent-circuit modeling for electrochemical studies
    Learn More
  • EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000
    EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000
    Quick View
    HIOKI E E CORPORATION EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000

    An advanced firmware upgrade for the IM3570 that enables quick and accurate equivalent circuit analysis, ideal for in-depth component evaluation and quality control.

    Key Features:

    • Automatically selects the optimal equivalent circuit model from five typical options
    • Minimizes discrepancies between measured and ideal frequency characteristics
    • Determines acceptance/rejection of L, C, and R elements with precision
    • Evaluates resonance sharpness (mechanical quality coefficient)
    • Enables detailed analysis of piezoelectric elements and inductors through resonance
    Learn More
  • IMPEDANCE ANALYZER IM3570
    IMPEDANCE ANALYZER IM3570
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM3570

    A high-speed, high-precision LCR meter ideal for low-ESR and impedance testing in advanced electronic components like polymer capacitors, inductors, and piezoelectric elements.

    Key Features:

    • Continuous LCR/DCR/sweep measurements with one instrument
    • Ultra-fast testing speeds: 1.5 ms (1 kHz), 0.5 ms (100 kHz)
    • High accuracy: ±0.08% basic accuracy for Z parameter
    • Ideal for low-ESR measurement of functional polymer capacitors
    • Suitable for resonance testing of piezoelectric elements
    • Accurate DCR and L-Q testing of inductors, coils, and transformers
    Learn More
  • IMPEDANCE ANALYZER IM7580A
    IMPEDANCE ANALYZER IM7580A - 2
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM7580A

    The Hioki IM7580A is a compact, high-speed impedance analyzer for 1 MHz to 300 MHz testing, ideal for both production and R&D. It works seamlessly with the IM9201 SMD fixture for reliable component testing.

    Key Features:

    • 1 MHz to 300 MHz frequency range
    • 0.5 ms test speed
    • ±0.72% basic accuracy
    • Compact half-rack size with palm-sized test head
    • Reliable contact check functions
    • Frequency, level, and time sweeps in Analyzer Mode
    • RF I-V method for precise measurement
    Learn More
  • IMPEDANCE ANALYZER IM7581
    IMPEDANCE ANALYZER IM7581 - 2
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM7581

    The Hioki IM7581 is a compact, high-speed impedance analyzer designed for accurate testing from 100 kHz to 300 MHz. It’s ideal for both production and development environments.

    Key Features:

    • 100 kHz to 300 MHz frequency range
    • 0.5 ms fastest test speed
    • ±0.72% basic accuracy
    • Compact half-rack size, palm-sized test head
    • Reliable contact check via DCR, Hi-Z reject, or waveform judgment
    • Supports frequency, level, and time sweeps in Analyzer Mode
    • Uses RF I-V method for precise measurement
    Learn More
  • Impedance Analyzer IM7587 3 GHz
    Impedance Analyzer IM7587 3 GHz
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM7587 3 GHz

    The Hioki Impedance Analyzer IM7587 3 GHz provides precision, speed, and versatility for impedance measurements from 1 MHz to 3 GHz, ideal for both R&D and mass production applications in electronic component testing.

    Key Features:

    • Frequency range: 1 MHz to 3 GHz
    • Test speed: 0.5 ms
    • Measurement variability: 0.07%
    • Basic accuracy: ±0.65% reading
    • RF I-V measurement technique
    • Compact half-rack design with palm-sized test head
    • Robust contact check capabilities
    • Analyzer mode: frequency and level sweeps, time interval measurements
    Learn More
  • 4400 Desktop Cell and Battery Testers Product Image
    4300 Desktop Cell and Battery Testers
    Quick View
    Maccor Desktop Cell and Battery Testers
    • High Accuracy & Precision – Achieves ±30 ηA accuracy on multi-current range channels, ensuring reliable and consistent results.
    • Scalable Configurations – Choose from 1 to 16 channels across three series configurations, providing flexibility to expand as testing needs grow.
    • Compact & Space-Efficient Design – Desktop form factor saves space while maintaining full testing capabilities.
    • Comprehensive Data Collection – Log current, voltage, time, temperature, and other critical parameters with high-speed data acquisition.
    • Versatile Applications – Ideal for cell and battery testing, fuel cell testing, super-capacitor testing, thermal battery testing, qualification testing, and more.
    • Turn-Key System – Pre-configured software and hardware bundles ensure quick deployment and easy setup.
    • Advanced Software Integration – Seamlessly integrates with Maccor’s proprietary software for automated testing, data analysis, and reporting.
    • Safety & Reliability – Designed with built-in safety features to protect both users and equipment.
    • High-Speed Data Logging – Collects high-resolution data for in-depth performance analysis and characterization.
    • Multiple Test Modes & Sequences – Supports constant current, power, resistance, pulse, and custom waveforms for comprehensive testing scenarios.

     

    Learn More
  • Maccor Battery Test Systems
    Quick View
    Maccor Cell, Battery, and Module Test Systems

    The Maccor Cell, Battery, and Module Test Systems are perfect for:

    • Battery and Cell Testing
    • Module and Pack Testing
    • Fuel Cell & Super-Capacitor Testing
    • Research & Development
    • Quality Control & Manufacturing

     

    Learn More
  • Series 8500 EV and Module Tester
    Series 8500 EV and Module Tester
    Quick View
    Maccor Maccor Series 8500 EV and Module Tester
    • Electrical energy is returned to the AC grid during discharge
    • 100% duty cycle standard – No system power limit, test channel rated for continuous operation at full power, allows use in testing very high power storage batteries and EV systems
    • Drive Cycle Simulation – Waveforms can be imported into the test procedure to increase test efficiency and reduce potential operator error
    • Local emergency cut-off switch, automatic shutdown on loss of AC power, reverse voltage protection, internal circuit breakers – Provides a high level of safety
    • Automatic scaling of data in W/kg or C-rate for drive cycle simulation programs and other test procedures – Reduces operator workload
    • Real-time data and graphics – Allows battery performance to be visually monitored at any time as the test progresses

     

    Learn More
  • MTC-20 Temperature Chamber Product Image
    MTC-20 Temperature Chamber Product Image
    Quick View
    Maccor MTC-20 Benchtop/Rack Mount Temperature Chamber
    • Addressable Chamber Controllers allow multiple chambers to be controlled on a single Maccor test system.
    • Chamber Temperature Set Points are set directly from Maccor’s Test System Software as a step in the test procedure.
    • The compact design allows the chamber to easily fit onto a benchtop.
    • If bench top and floor space are limited, the 7U height and compact design make it possible to stack up to four chambers in a standard 19” industrial rack cabinet.
    • Electrical feedthroughs allow electrical connections inside the chamber while maintaining a maximum seal.
    • Optional interface board can be installed inside the chamber to allow a plug-in interface that can accommodate Maccor’s molded Kelvin and coin cell holders.
    • Large 3” (76 mm) diameter cable portal on the right side of the chamber.
    • Non-Conducting Powder Coated Interior.

     

    Learn More
  • 4600A High Density Cell Tester
    4600A High Density Cell Tester
    Quick View
    Maccor Maccor Series 4600A High Density Cell Tester
    • High-Density Testing – Up to 192 test positions per rack or 32 positions per desktop unit, ensuring high-throughput testing.
    • Independent Operation – Each test position operates independently, enabling simultaneous testing of multiple cells under different conditions.
    • User-Programmable Multi-Step Testing – Configure constant current, power, voltage, or resistance test sequences with easy-to-use software.
    • Precise Data Logging & Analysis – Logs current, voltage, time, temperature, and other critical parameters with high-speed data acquisition.
    • Real-Time Monitoring & Control – Data can be viewed, plotted, and analyzed in real-time, providing instant insights into cell performance.
    • Compact & Scalable Design – Available in desktop models (32 positions) and rack-mounted configurations (up to 192 positions per rack).
    • Seamless Integration – Powered by Maccor’s standard test system software, ensuring consistent performance and compatibility with existing systems.
    • Turn-Key Solution – Supplied as a complete system with PC and software, ensuring quick deployment and easy setup.
    • Advanced Safety Features – Includes automatic shutdown on power loss, reverse voltage protection, and internal circuit breakers for safe operation.
    • Versatile Applications – Suitable for single-cell testing, R&D, quality control, battery performance evaluation, and cycle life testing.

     

    Learn More
  • 5302 Advanced Lithium Cell Formation System
    5302 Advanced Lithium Cell Formation System
    Quick View
    Maccor Series 5302 Advanced Lithium Cell Formation System
    • Advanced Formation Schedules – Supports up to 18 test steps with subroutines, allowing complex formation programs for Lithium-Ion and Lithium Polymer cells.
    • High Channel Density – Configurable with 512 to 2048 test channels, supporting large-scale production and pilot line testing.
    • Accurate Data Logging & Analysis – Logs Voltage, Current, Time, Capacity, Energy, and Cycle with high-speed data acquisition at 200 data points per second.
    • Flexible Test Modes – Supports Constant Current, Constant Voltage, Constant Power, and Constant Resistance operating modes.
    • Seamless Transition from Constant Current to Constant Voltage – Ensures smooth and accurate formation with no interruptions or spikes.
    • High Accuracy & Resolution –
      • Voltage Measurement Range: 0 to 5V
      • Voltage Accuracy: ±5 mV
      • Voltage Resolution: 16-bit
      • Current Resolution: 16-bit
    • Intelligent Cell Grading – Customizable grade profiles allow cell grading based on performance, ensuring consistent quality control.
    • High Scalability & Flexibility – Combine channels in parallel to increase current capability, supporting dynamic testing requirements.
    • Advanced Safety Features – Includes automatic shutdown on power failure, status recovery, and reverse voltage protection for safe operation.
    • Turn-Key Solution – Complete system with PC computer and software, ensuring quick deployment and easy setup.
    • Comprehensive Data Management – Automatic report generation, data backup, and processing with the MIMS Server Application.

     

    Learn More
  • Maccor M22 Virtual Machine Solution
    Maccor M22 Virtual Machine Solution
    Quick View
    Maccor Maccor M22 Virtual Machine Solution
    • Enterprise-class server.
    • Maximum system uptime
    • Designed to run 24×7, 365 days a year
    • M7© – Hosts up to 7 virtual machines representing 7 desktop computers
    • M22 © – Hosts up to 22 virtual machines representing 22 desktop computers
    • Server OS hosted on 2 Enterprise-grade SATA-SSD drives, RAID1
    • Virtual Machines hosted on shared array qty of eight (14TB) Enterprise-grade SAS-3 hard drives, RAID6
    • 2 Enterprise-grade PSU’s, 2 fans, 2 SATA Drives, 8 SAS-3 drives, all of which are hot-swappable CRU’s (customer replaceable units)

     

    Learn More
  •
    Quick View
    Maccor Maccor Battery Cell Balancer

    Efficient and Precise Cell Balancing

    The Maccor Cell Balancer is engineered to:

    • Independently charge and discharge each cell within a string, maintaining equal voltage levels across all cells.
    • Optimize battery pack performance by preventing cell overcharging or over-discharging, ensuring longer cycle life and enhanced safety.
    • Balance up to 8 cells per unit, with the ability to expand to larger battery packs by connecting multiple balancers in series.

    Seamless Integration with Maccor Test Systems

    The Maccor Cell Balancer is designed to integrate seamlessly with Maccor’s Mactest32.exe software, allowing users to:

    • Incorporate cell balancing steps directly into their test procedures.
    • Control and monitor cell balancing with real-time data visualization and automated data logging.
    • Customize balancing parameters, including charge and discharge currents, ensuring precision and flexibilityfor different battery chemistries and configurations.

     

    Learn More
  • Maccor Series 6000 Next Generation Battery Tester
    Maccor Series 6000 Next Generation Battery Tester
    Quick View
    Maccor Maccor Series 6000 Next Generation Battery Tester
    • Advanced Multi-Level Pulse (AMLP) – Design complex pulse profiles with up to 15,000 levels for high-precision battery testing.
    • Ultra-Fast Data Collection – Log data at 1 kHz across multiple channels with 20 kHz sampling for the first milliseconds, capturing critical transient events.
    • High-Resolution Step Length Control – Specify test steps as short as 750 microseconds with 1-microsecond increments, enabling ultra-fast dynamic testing.
    • High-Speed Set Point Lock-In – Achieve setpoint stabilization in as little as 1 millisecond, ensuring accurate and consistent results.
    • Customizable Waveforms – Stream external text test files with programmable waveforms, supporting constant current or power modes with 1-millisecond increments and 1-microsecond resolution.
    • Unmatched Flexibility – Run multiple unique waveforms in a single test without limitations on the number of levels.
    • Comprehensive Data Logging – Log data on current, voltage, time, and other factors continuously, providing comprehensive performance insights.
    • Optimized for Complex Testing – Ideal for cycle life testing, pulse power characterization, impedance measurements, and battery performance evaluation.
    • Scalable and Modular Design – Expand testing capabilities by integrating multiple Series 6000 units, ensuring scalable solutions for R&D and production environments.

     

    Learn More
  • 3334 AC/DC Power Meter Product Image from TMetrix
    Quick View
    HIOKI E E CORPORATION 3334 AC/DC Power Meter USD $ 2,498.00

    Single Phase Power Meter Compatible with DC Measurement and Current/Power Integration Measurement

    Key Features:

    • Compatible with the SPECpower® (*1) benchmarking for server power consumption
    • DC measurement mode, AC, and AC+DC measurement
    • Integration function for current and power
    • ±0.1% high basic accuracy (*2) For complete details, please refer to the specifications)
    • Extended period of guaranteed accuracy of 3 years
    • Complete accuracy over a wide input range

     

    Learn More