PRODUCTS
TMetrix carries the following test and measurement products:
SERVICES
Explore our range of technical support and calibration services:
1 800 665 7301 | info@tmetrix.com

About Us | Events | Support | Resource Centre | Line Card | News | Blog | Contact Us

Products

  • 7548 Linear Amplifier
    7548 Linear Amplifier
    Quick View
    AE Techron 7548 Linear Amplifier

    The 7548 Linear Amplifier is a high-output, low-noise solution engineered for precision and reliability in demanding environments.

    Key Features:

    • Up to 100 Ap / 195 Vp output
    • Delivers 12,000W peak power for 40 ms
    • Supports continuous 5,500W output into 1Ω load
    • Operates from DC to 100 kHz bandwidth
    • Field-selectable current or voltage mode
    • Ideal for MIL-STD-704F three-phase testing
    • Stackable for 800 Vp or 170 Ap system output
    • Built-in protection against over-voltage, over-temp, and overload
    • Intuitive LCD display and status indicators

     

    Learn More
  • 7796HC Linear Powerm Amplifier - 1
    Quick View
    AE Techron 7796HC Linear Power Amplifier

    7796HC Linear Power Amplifier – High Current DC & AC Precision

    Key Features:

    • Output up to 85A continuous, 200A in-rush current
    • Frequency response: DC to 100+ kHz
    • Four-quadrant operation: source and sink
    • Field-selectable voltage or current modes
    • Stable with resistive, inductive, and capacitive loads
    • Multiple protections: Over/under voltage, current, and temperature
    • Supports DC ripple, surge, dropout, and ground noise simulations
    • Ideal for high-current DC Conducted Immunity testing
    • LCD with real-time voltage and current metrics
    • Supports both balanced and unbalanced inputs

     

    Read more
    Learn More
  •
    Quick View
    AE Techron Aetec 7794 Amplifier

    Aetec 7794 High Current Industrial Amplifier

    Key Features:

    • Up to 200 Ap / 100 Vp; DC to 150 kHz bandwidth
    • Stable with resistive, inductive, or capacitive loads
    • Controlled-voltage or controlled-current operation
    • Switchable rail supply for optimized load impedance
    • 60A continuous output at 13.8V DC
    • ±95V DC and >35 V/µs slew rate
    • Four-quadrant operation: sourcing and sinking
    • Extensive protection against overvoltage, overcurrent, overtemperature
    • Rack-mountable chassis with LCD fault diagnostics

     

    Learn More
  • AE Techron 7796 Amplifier - 1
    Quick View
    AE Techron AETechron 7796 Amplifier

    AETechron 7796 Amplifier – High-Current, Low-Impedance Industrial Power
    Ideal for precision testing, EMC simulations, and MRI systems.

    Key Features:

    • Delivers over 200 Ap peak current, up to ±180V
    • DC to 100 kHz bandwidth for versatile signal reproduction
    • Four-quadrant operation (source/sink modes)
    • Operates in both voltage and current-controlled modes
    • Handles in-rush currents up to 200A
    • Field-configurable rail supply modes for load optimization
    • Advanced protection against voltage, current, and thermal faults
    • Stackable for higher voltage or current (up to 800 Ap)

     

    Learn More
  • Aim-TTi AC1000A Power Source
    Aim-TTi AC1000A Power Source
    Quick View
    Aim-TTi Aim-TTi AC1000A Power Source

    A precision AC power supply designed for EMC testing, pre-compliance setups, and product development labs.

    Key Features:

    • 1000W power output at 230V
    • Low harmonic distortion for clean AC testing
    • Delivers up to 4.4A RMS and 10A peak currents
    • EN61000–3–2 compliant for harmonic emissions
    • Available with UK, Schuko, or USA sockets
    • Comprehensive built-in overload protection
    • Simple connection via standard power connectors

     

    Learn More
  • Aim-TTi CPX Series Power Supply - 1
    Quick View
    Aim-TTi Aim-TTi CPX Series Power Supply

    Reliable, flexible, and programmable power delivery for bench, system, and ATE applications.

    Key Features:

    • PowerFlex technology for variable V/A within power limits
    • Up to 60V and 20A, 180W or 420W per output
    • Dual or single isolated outputs
    • CV or CC operation with settings lock (S-Lock)
    • Selectable OVP trips and remote sense terminals
    • RS232, USB, LAN/LXI standard on P models
    • GPIB available as option (P models only)
    • Compact, rugged 3U quarter or half rack design
    • Analog remote control (CPX400SA model)

     

    Learn More
  • CHEMICAL IMPEDANCE ANALYZER IM3590
    CHEMICAL IMPEDANCE ANALYZER IM3590 - 2
    Quick View
    HIOKI E E CORPORATION CHEMICAL IMPEDANCE ANALYZER IM3590

    A high-performance analyzer designed for R&D applications involving electrochemical components, materials, batteries, and EDLCs. It enables precise impedance measurements essential for advanced evaluation and development.

    Key Features:

    • Wide frequency range: 1 mHz to 200 kHz for detailed ion and solution behavior analysis
    • Dual function: High-speed continuous LCR and sweep measurements with one device
    • Battery analysis: Measures internal impedance under no-load conditions
    • Ultra-fast sweep: Perform measurements in as little as 2 ms
    • High accuracy: ±0.05% basic precision for reliable R&D and testing
    • Advanced analysis: Supports Cole-Cole plots and equivalent-circuit modeling for electrochemical studies
    Learn More
  • EL-R Series DC Power Supply - 1
    EL-R Series DC Power Supply - 2
    Quick View
    Aim-TTi EL-R Series DC Power Supply

    Compact and quiet bench power supply with precision linear regulation and a range of output options for lab or system use.

    Key Features:

    • Linear regulated bench DC power supply
    • Single, dual, and triple output options
    • Up to 56V and 5A with up to 130W output
    • 4-digit voltage and current display per output
    • Constant voltage or constant current operation
    • Switchable local/remote sensing
    • Silent, fan-free convection cooling
    • Compact design saves bench space
    • Optional RS232 or USB interfaces (on select models)
    • Auxiliary output (1.5–5V/2A) on EL302RT

     

    Learn More
  • EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000
    EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000
    Quick View
    HIOKI E E CORPORATION EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000

    An advanced firmware upgrade for the IM3570 that enables quick and accurate equivalent circuit analysis, ideal for in-depth component evaluation and quality control.

    Key Features:

    • Automatically selects the optimal equivalent circuit model from five typical options
    • Minimizes discrepancies between measured and ideal frequency characteristics
    • Determines acceptance/rejection of L, C, and R elements with precision
    • Evaluates resonance sharpness (mechanical quality coefficient)
    • Enables detailed analysis of piezoelectric elements and inductors through resonance
    Learn More
  • EX-R Series DC Power Supply - 1
    Quick View
    Aim-TTi EX-R Series DC Power Supply

    A versatile bench power supply series with mixed-mode regulation, ideal for lab or system environments.

    Key Features:

    • Single, dual, or triple outputs with up to 420W power
    • Output ranges: 18V/10A, 20V/20A, 35V/5A, 42V/10A
    • Dual model: 2×35V/4A or 150V/2A (combined)
    • Triple model includes 1.5–5V/5A auxiliary output
    • Independent 4-digit meters for each output
    • Local or remote sensing with constant V or I modes
    • Silent, fan-free operation for most models
    • Compact, space-saving design
    • RS232 or USB interfaces on select models

     

    Learn More
  • FX Series DC Power Supply - 1
    FX Series DC Power Supply - 2
    Quick View
    Aim-TTi FX Series DC Power Supply

    Compact, versatile, and efficient, the FX Series is ideal for test labs, R&D, and educational use.

    Key Features:

    • PowerFlex autoranging outputs (up to 105W per channel)
    • Dual or triple output models (210W or 246W total)
    • SELV compliant and high safety design
    • Rotary, touch, and USB control options
    • Low ripple noise (<2mV), high resolution (1mV/1mA)
    • Voltage tracking and simultaneous V/I control
    • Remote USB interface with SCPI protocol
    • 25 user-defined memory presets
    • Switchable remote sense & intelligent cooling
    • Includes Test Bridge software for logging & automation

     

    Learn More
  • HA1600A Harmonics Analyzer
    HA1600A Harmonics Analyzer
    Quick View
    Aim-TTi HA1600A Harmonics Analyzer

    High-performance analyzer for compliance testing to EN61000-3-2 and EN61000-3-3 with real-time harmonic and waveform data display.

    Key Features:

    • Complies with EN61000-3-2 and EN61000-3-3 standards
    • Measures rms/peak voltage & current, power, PF, phase
    • Histogram display for 40 harmonics
    • Voltage & current waveform visualization
    • Real-time graphical updates for live analysis
    • High-contrast 320 x 240 pixel LCD
    • USB, RS232, and printer interfaces
    • HA-PC-Link+ software included for full PC control
    • Available with UK, Schuko, or US sockets

     

    Learn More
  • T3DMM Series - Digital Multimeters
    T3DMM Series - Digital Multimeters
    Quick View
    Teledyne LeCroy HDA125 High-Speed Digital Analyzer

    HDA125 High-Speed Digital Analyzer brings advanced logic analysis capabilities to your existing Teledyne LeCroy oscilloscopes. Compact, accurate, and versatile.

    Key Features:

    • 12.5 GS/s sample rate for high-speed digital capture
    • Supports up to 18 digital channels
    • Compatible with WaveMaster/SDA 8 Zi-B and LabMaster 10Zi-A oscilloscopes
    • QuickLink Probe System for fast, low-impact signal access
    • 3 GHz bandwidth and 80 ps timing accuracy
    • Command bus decoding for in-depth DDR/LPDDR memory debugging
    • Minimal signal loading with 110 kΩ, 0.12 pF tip impedance
    • Cost-effective QuickLink solder-in tips simplify multi-point testing
    • Ideal for mixed-signal, high-speed, and memory interface debugging
    Learn More
  • IMPEDANCE ANALYZER IM3570
    IMPEDANCE ANALYZER IM3570
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM3570

    A high-speed, high-precision LCR meter ideal for low-ESR and impedance testing in advanced electronic components like polymer capacitors, inductors, and piezoelectric elements.

    Key Features:

    • Continuous LCR/DCR/sweep measurements with one instrument
    • Ultra-fast testing speeds: 1.5 ms (1 kHz), 0.5 ms (100 kHz)
    • High accuracy: ±0.08% basic accuracy for Z parameter
    • Ideal for low-ESR measurement of functional polymer capacitors
    • Suitable for resonance testing of piezoelectric elements
    • Accurate DCR and L-Q testing of inductors, coils, and transformers
    Learn More
  • IMPEDANCE ANALYZER IM7580A
    IMPEDANCE ANALYZER IM7580A - 2
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM7580A

    The Hioki IM7580A is a compact, high-speed impedance analyzer for 1 MHz to 300 MHz testing, ideal for both production and R&D. It works seamlessly with the IM9201 SMD fixture for reliable component testing.

    Key Features:

    • 1 MHz to 300 MHz frequency range
    • 0.5 ms test speed
    • ±0.72% basic accuracy
    • Compact half-rack size with palm-sized test head
    • Reliable contact check functions
    • Frequency, level, and time sweeps in Analyzer Mode
    • RF I-V method for precise measurement
    Learn More
  • IMPEDANCE ANALYZER IM7581
    IMPEDANCE ANALYZER IM7581 - 2
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM7581

    The Hioki IM7581 is a compact, high-speed impedance analyzer designed for accurate testing from 100 kHz to 300 MHz. It’s ideal for both production and development environments.

    Key Features:

    • 100 kHz to 300 MHz frequency range
    • 0.5 ms fastest test speed
    • ±0.72% basic accuracy
    • Compact half-rack size, palm-sized test head
    • Reliable contact check via DCR, Hi-Z reject, or waveform judgment
    • Supports frequency, level, and time sweeps in Analyzer Mode
    • Uses RF I-V method for precise measurement
    Learn More