1 800 665 7301 | info@tmetrix.com

  • The 7548 Linear Amplifier is a high-output, low-noise solution engineered for precision and reliability in demanding environments.

    Key Features:

    • Up to 100 Ap / 195 Vp output
    • Delivers 12,000W peak power for 40 ms
    • Supports continuous 5,500W output into 1Ω load
    • Operates from DC to 100 kHz bandwidth
    • Field-selectable current or voltage mode
    • Ideal for MIL-STD-704F three-phase testing
    • Stackable for 800 Vp or 170 Ap system output
    • Built-in protection against over-voltage, over-temp, and overload
    • Intuitive LCD display and status indicators

     

  • 7796HC Linear Power Amplifier – High Current DC & AC Precision

    Key Features:

    • Output up to 85A continuous, 200A in-rush current
    • Frequency response: DC to 100+ kHz
    • Four-quadrant operation: source and sink
    • Field-selectable voltage or current modes
    • Stable with resistive, inductive, and capacitive loads
    • Multiple protections: Over/under voltage, current, and temperature
    • Supports DC ripple, surge, dropout, and ground noise simulations
    • Ideal for high-current DC Conducted Immunity testing
    • LCD with real-time voltage and current metrics
    • Supports both balanced and unbalanced inputs

     

  • Aetec 7794 High Current Industrial Amplifier

    Key Features:

    • Up to 200 Ap / 100 Vp; DC to 150 kHz bandwidth
    • Stable with resistive, inductive, or capacitive loads
    • Controlled-voltage or controlled-current operation
    • Switchable rail supply for optimized load impedance
    • 60A continuous output at 13.8V DC
    • ±95V DC and >35 V/µs slew rate
    • Four-quadrant operation: sourcing and sinking
    • Extensive protection against overvoltage, overcurrent, overtemperature
    • Rack-mountable chassis with LCD fault diagnostics

     

  • AETechron 7796 Amplifier – High-Current, Low-Impedance Industrial Power
    Ideal for precision testing, EMC simulations, and MRI systems.

    Key Features:

    • Delivers over 200 Ap peak current, up to ±180V
    • DC to 100 kHz bandwidth for versatile signal reproduction
    • Four-quadrant operation (source/sink modes)
    • Operates in both voltage and current-controlled modes
    • Handles in-rush currents up to 200A
    • Field-configurable rail supply modes for load optimization
    • Advanced protection against voltage, current, and thermal faults
    • Stackable for higher voltage or current (up to 800 Ap)

     

  • Featuring an ultra-compact 0.35”microLED display with high-brightnessand high-resolution technology,delivering dynamic visuals and seamlessintegration for next-generationautomotive heads-up display (HUD).

    Key Features of High Brightness High Resolution 0.35″ Micro-Display:

    • OVERVIEWUltra-High Brightness: Engineered to perform in a widerange of lighting conditions, ensuring excellent visibility inboth indoor and outdoor environments.
    • Robust Durability: Built to withstand demandingconditions for long-term reliability.
    • Ultra-Thin & Lightweight: Designed for seamlessintegration into compact spaces, leveraging microLED’sinherently slim profile without compromisingperformance.
    • Power-Efficient Design: Consumes significantly less powercompared to traditional display technologies, extendingbattery life for wearable devices.

     

  • Showcasing a large 10” panel withultra-bright, energy-efficientmicroLED technology, deliveringdynamic visuals and seamlessintegration for next-generationintelligent vehicles.

    Ket Features:

    • OVERVIEWUltra-High Brightness: Engineered to perform in a widerange of lighting conditions, ensuring excellent visibility inboth indoor and outdoor environments.
    • Robust Durability: Built to withstand demandingconditions for long-term reliability.
    • Ultra-Thin & Lightweight: Designed for seamlessintegration into compact spaces, leveraging microLED’sinherently slim profile without compromisingperformance.
    • Vibrant RGB Color Reproduction: Delivers rich, high-contrast visuals with precise color accuracy, enhancingvisuals for display applications.

     

  • Advancing automotive displayswith ultra-bright, energy-efficientmicroLED technology, enablingdynamic visuals and seamlessintegration for next-generationintelligent vehicles.

    Key Features:

    • OVERVIEWUltra-High Brightness: Engineered to perform in a widerange of lighting conditions, ensuring excellent visibility inboth indoor and outdoor environments.
    • Robust Durability: Built to withstand demandingconditions for long-term reliability.
    • Ultra-Thin & Lightweight: Designed for seamlessintegration into compact spaces, leveraging microLED’sinherently slim profile without compromisingperformance.
    • Vibrant RGB Color Reproduction: Delivers rich, high-contrast visuals with precise color accuracy, enhancingvisuals for display applications.

     

  • Revolutionizing automotivelighting with ultra-bright, energy-efficient microLED displays,enabling adaptive illuminationand seamless integration for next-generation intelligent vehicles.

    Key Features:

    • OVERVIEWUltra-High Brightness: Engineered to perform in a widerange of lighting conditions, ensuring excellent visibility inboth indoor and outdoor environments.
    • Robust Durability: Built to withstand demandingconditions for long-term reliability.
    • Ultra-Thin & Lightweight: Designed for seamlessintegration into compact spaces, leveraging microLED’sinherently slim profile without compromisingperformance.
    • Segment-Driven Intelligence: Enables optimal messagingthrough precisely controlled lighting segments, enhancingintelligent lighting capabilities for smart automotiveapplications and other high-performance devices.

     

  • Transforming automotive lightingwith ultra-bright, energy-efficientmicroLED displays, deliveringprecision illumination andseamless integration for next-generation vehicles.

    Key Features:

    • OVERVIEWUltra-High Brightness: Engineered to perform in a widerange of lighting conditions, ensuring excellentvisibility in both indoor and outdoor environments.
    • Robust Durability: Built to withstand demandingconditions for long-term reliability.
    • Ultra-Thin & Lightweight: Designed for seamlessintegration into compact spaces, leveraging microLED’sinherently slim profile without compromisingperformance.
    • Power-Efficient Design: Consumes significantly lesspower compared to traditional display technologies.

     

  • Applications:

    • Aerospace & Defense – Avionics, MIL-STD-704, EMC compliance, 400Hz & wild frequency testing
    • EV Charging & V2G/V2H Testing – On-board chargers, grid-tied inverters, smart grid simulation
    • Energy Storage & Renewable Systems – Home ESS, solar PV/grid-tied inverter testing
    • Industrial Power Simulation – Frequency conversion, harmonic analysis, transient simulations
    • Smart Grid & Compliance Testing – IEC 61000, RTCA DO-160, IEEE 1547, and more

     

  • Applications

    • Aerospace & Avionics – Frequency conversion (400Hz & wild frequency testing), MIL-STD compliance
    • EV Charging & Power Electronics – On-board chargers (OBC), V2G/V2H testing, battery simulation
    • Renewable Energy Systems – Solar PV/grid-tied inverter testing, home ESS & smart grid simulations
    • Power Supply & Industrial Testing – AC/DC power supply evaluation, network server & data center testing
    • Research & Development Labs – High-frequency power testing, compliance verification, transient simulations

     

  • High-Power 4-Quadrant AC & DC Power Source with Load Option

    • Powerful & Versatile: 12kVA / kW to 21kVA / kW in a 4U chassis. Parallel units up to 168kVA/kW (single cabinet)or 252kVA/kW (dual cabinet).
    • Multi-Phase Flexibility: Supports single-phase, split-phase, and three-phase configurations with AC, DC, or AC+DC output.
    • Grid Simulation & Compliance Testing: Emulates real-world power grid conditions, simulating disturbances, harmonics, and interharmonics for accurate renewable energy testing (solar inverters, EV charging, microgrid, and UPS applications).
    • Regenerative Efficiency: Over 90% energy recovery back to the grid reduces power consumption and operational costs.
    • Advanced Control & Monitoring: SmartSource Suite enables remote control via an intuitive web browser interface with LAN, USB, GPIB, and RS232 connectivity.

     

  • High-Power 4-Quadrant AC & DC Power Source

    • High Power Density: Available in 30kVA/kW, 45kVA/kW, and 55kVA/kW models, with parallel cabinets scaling up to 550kVA/kW.
    • Versatile Output Capability: AC, DC, or AC+DC modes in single-phase, split-phase, or three-phase configurations.
    • Dual Constant Power Voltage Ranges:
      • AC Voltage: 0-240V L-N / 0-415V L-L & 0-480V L-N / 0-830V L-L
      • DC Voltage: 0-340Vdc & 0-680Vdc
    • Grid Compliance Testing: Meets global standards like IEEE 1547, UL 1741, IEC 61000-3, IEC 61000-4
    • Regenerative Power Efficiency: >90% energy recovery back to the grid, reducing power waste and operational costs
    • PHIL Interface for Hardware-in-the-Loop (HIL) Testing: High-speed analog I/O for real-time frequency, voltage, and current control.
    • SmartSource Suite for Remote Testing: Web-based real-time monitoring and control via LAN, USB, GPIB, and RS232.

     

    • High Accuracy & Precision – Achieves ±30 ηA accuracy on multi-current range channels, ensuring reliable and consistent results.
    • Scalable Configurations – Choose from 1 to 16 channels across three series configurations, providing flexibility to expand as testing needs grow.
    • Compact & Space-Efficient Design – Desktop form factor saves space while maintaining full testing capabilities.
    • Comprehensive Data Collection – Log current, voltage, time, temperature, and other critical parameters with high-speed data acquisition.
    • Versatile Applications – Ideal for cell and battery testing, fuel cell testing, super-capacitor testing, thermal battery testing, qualification testing, and more.
    • Turn-Key System – Pre-configured software and hardware bundles ensure quick deployment and easy setup.
    • Advanced Software Integration – Seamlessly integrates with Maccor’s proprietary software for automated testing, data analysis, and reporting.
    • Safety & Reliability – Designed with built-in safety features to protect both users and equipment.
    • High-Speed Data Logging – Collects high-resolution data for in-depth performance analysis and characterization.
    • Multiple Test Modes & Sequences – Supports constant current, power, resistance, pulse, and custom waveforms for comprehensive testing scenarios.

     

  • The Maccor Cell, Battery, and Module Test Systems are perfect for:

    • Battery and Cell Testing
    • Module and Pack Testing
    • Fuel Cell & Super-Capacitor Testing
    • Research & Development
    • Quality Control & Manufacturing

     

    • Electrical energy is returned to the AC grid during discharge
    • 100% duty cycle standard – No system power limit, test channel rated for continuous operation at full power, allows use in testing very high power storage batteries and EV systems
    • Drive Cycle Simulation – Waveforms can be imported into the test procedure to increase test efficiency and reduce potential operator error
    • Local emergency cut-off switch, automatic shutdown on loss of AC power, reverse voltage protection, internal circuit breakers – Provides a high level of safety
    • Automatic scaling of data in W/kg or C-rate for drive cycle simulation programs and other test procedures – Reduces operator workload
    • Real-time data and graphics – Allows battery performance to be visually monitored at any time as the test progresses