Products

The 7548 Linear Amplifier is a high-output, low-noise solution engineered for precision and reliability in demanding environments.

Key Features:

• Up to 100 Ap / 195 Vp output
• Delivers 12,000W peak power for 40 ms
• Supports continuous 5,500W output into 1Ω load
• Operates from DC to 100 kHz bandwidth
• Field-selectable current or voltage mode
• Ideal for MIL-STD-704F three-phase testing
• Stackable for 800 Vp or 170 Ap system output
• Built-in protection against over-voltage, over-temp, and overload
• Intuitive LCD display and status indicators

7796HC Linear Power Amplifier – High Current DC & AC Precision

Key Features:

• Output up to 85A continuous, 200A in-rush current
• Frequency response: DC to 100+ kHz
• Four-quadrant operation: source and sink
• Field-selectable voltage or current modes
• Stable with resistive, inductive, and capacitive loads
• Multiple protections: Over/under voltage, current, and temperature
• Supports DC ripple, surge, dropout, and ground noise simulations
• Ideal for high-current DC Conducted Immunity testing
• LCD with real-time voltage and current metrics
• Supports both balanced and unbalanced inputs

Aetec 7794 High Current Industrial Amplifier

Key Features:

• Up to 200 Ap / 100 Vp; DC to 150 kHz bandwidth
• Stable with resistive, inductive, or capacitive loads
• Controlled-voltage or controlled-current operation
• Switchable rail supply for optimized load impedance
• 60A continuous output at 13.8V DC
• ±95V DC and >35 V/µs slew rate
• Four-quadrant operation: sourcing and sinking
• Extensive protection against overvoltage, overcurrent, overtemperature
• Rack-mountable chassis with LCD fault diagnostics

AETechron 7796 Amplifier – High-Current, Low-Impedance Industrial Power
Ideal for precision testing, EMC simulations, and MRI systems.

Key Features:

• Delivers over 200 Ap peak current, up to ±180V
• DC to 100 kHz bandwidth for versatile signal reproduction
• Four-quadrant operation (source/sink modes)
• Operates in both voltage and current-controlled modes
• Handles in-rush currents up to 200A
• Field-configurable rail supply modes for load optimization
• Advanced protection against voltage, current, and thermal faults
• Stackable for higher voltage or current (up to 800 Ap)

• Superior Noise Reduction – Attenuates up to 24 dBA, making it perfect for quiet office environments.
• Efficient Cooling – Six ultra-quiet fans expel up to 3 kW of thermal heat.
• Flexible Installation – Available in 24U, 35U, and 44U heights with 36” and 42” depths.
• Durable Construction – Made from 12-gauge US-finished steel with a maximum load capacity of 2,000 lbs.
• Comprehensive Security – Key lockable front and rear doors, with optional locking side panels.
• Acoustic Lined Panels – Fully lined with sound-absorbing material for maximum noise control.
• Versatile Color Options – Available in 7 standard colors including Black, Pearl White, Granite, Platinum, White, Dark Grey, and Blue.
• Complete Accessibility – Removable side panels for easy installation and maintenance.
• Integrated Temperature Display – Real-time temperature monitoring with remote sensor support.
• Cable Management – Bottom rear cable entry accommodates up to 500 CAT 5 cables.

• High Accuracy & Precision – Achieves ±30 ηA accuracy on multi-current range channels, ensuring reliable and consistent results.
• Scalable Configurations – Choose from 1 to 16 channels across three series configurations, providing flexibility to expand as testing needs grow.
• Compact & Space-Efficient Design – Desktop form factor saves space while maintaining full testing capabilities.
• Comprehensive Data Collection – Log current, voltage, time, temperature, and other critical parameters with high-speed data acquisition.
• Versatile Applications – Ideal for cell and battery testing, fuel cell testing, super-capacitor testing, thermal battery testing, qualification testing, and more.
• Turn-Key System – Pre-configured software and hardware bundles ensure quick deployment and easy setup.
• Advanced Software Integration – Seamlessly integrates with Maccor’s proprietary software for automated testing, data analysis, and reporting.
• Safety & Reliability – Designed with built-in safety features to protect both users and equipment.
• High-Speed Data Logging – Collects high-resolution data for in-depth performance analysis and characterization.
• Multiple Test Modes & Sequences – Supports constant current, power, resistance, pulse, and custom waveforms for comprehensive testing scenarios.

The Maccor Cell, Battery, and Module Test Systems are perfect for:

• Battery and Cell Testing
• Module and Pack Testing
• Fuel Cell & Super-Capacitor Testing
• Research & Development
• Quality Control & Manufacturing

Ideal for:

• Small & Medium Businesses – Deploy IT infrastructure without dedicated server rooms.
• Edge Computing – Reduce latency and bandwidth strain with localized computing.
• Secure Data Centers – Enhance equipment security & environmental control.

With its compact footprint, advanced cooling, and soundproofing technology, the EDGE 3 enclosure offers a quiet, efficient, and scalable alternative to traditional server rooms.

• Electrical energy is returned to the AC grid during discharge
• 100% duty cycle standard – No system power limit, test channel rated for continuous operation at full power, allows use in testing very high power storage batteries and EV systems
• Drive Cycle Simulation – Waveforms can be imported into the test procedure to increase test efficiency and reduce potential operator error
• Local emergency cut-off switch, automatic shutdown on loss of AC power, reverse voltage protection, internal circuit breakers – Provides a high level of safety
• Automatic scaling of data in W/kg or C-rate for drive cycle simulation programs and other test procedures – Reduces operator workload
• Real-time data and graphics – Allows battery performance to be visually monitored at any time as the test progresses

Customizable Configurations for Any Environment

• Freestanding cabinets with adjustable 19” EIA square hole rails and depths of up to 38”.
• Wall-mounted units (cold-rolled steel or stainless steel) available in 12U and 19U sizes.
• Outdoor-ready enclosures for harsh industrial conditions.

Ideal for:

• Telecom & Network Infrastructure
• Industrial Automation & Edge Computing
• Smart Grid & IoT Deployments
• Military & Government Facilities

The KARIS SRK Precision Cooling Cabinets are a space-saving, cost-effective solution for securely housing IT and industrial equipment while maintaining optimal environmental conditions.

• Addressable Chamber Controllers allow multiple chambers to be controlled on a single Maccor test system.
• Chamber Temperature Set Points are set directly from Maccor’s Test System Software as a step in the test procedure.
• The compact design allows the chamber to easily fit onto a benchtop.
• If bench top and floor space are limited, the 7U height and compact design make it possible to stack up to four chambers in a standard 19” industrial rack cabinet.
• Electrical feedthroughs allow electrical connections inside the chamber while maintaining a maximum seal.
• Optional interface board can be installed inside the chamber to allow a plug-in interface that can accommodate Maccor’s molded Kelvin and coin cell holders.
• Large 3” (76 mm) diameter cable portal on the right side of the chamber.
• Non-Conducting Powder Coated Interior.

• Fully assembled design for hassle-free installation.
• Hinged swing-out option for rear access to cables and equipment.
• Adjustable rails and multiple cable management points.
• Lockable side panels and glass doors for added security.
• Compatibility with power, cooling, and shelving accessories.
• Removable back panel for simplified mounting.
• Durable black powder-coated finish with EIA 310-D compliance.

The KARIS SRK Series Wall-Mount Cabinets provide an ideal solution for IT professionals and data centre managers looking for efficient, secure, and accessible equipment housing.

• High-Density Testing – Up to 192 test positions per rack or 32 positions per desktop unit, ensuring high-throughput testing.
• Independent Operation – Each test position operates independently, enabling simultaneous testing of multiple cells under different conditions.
• User-Programmable Multi-Step Testing – Configure constant current, power, voltage, or resistance test sequences with easy-to-use software.
• Precise Data Logging & Analysis – Logs current, voltage, time, temperature, and other critical parameters with high-speed data acquisition.
• Real-Time Monitoring & Control – Data can be viewed, plotted, and analyzed in real-time, providing instant insights into cell performance.
• Compact & Scalable Design – Available in desktop models (32 positions) and rack-mounted configurations (up to 192 positions per rack).
• Seamless Integration – Powered by Maccor’s standard test system software, ensuring consistent performance and compatibility with existing systems.
• Turn-Key Solution – Supplied as a complete system with PC and software, ensuring quick deployment and easy setup.
• Advanced Safety Features – Includes automatic shutdown on power loss, reverse voltage protection, and internal circuit breakers for safe operation.
• Versatile Applications – Suitable for single-cell testing, R&D, quality control, battery performance evaluation, and cycle life testing.

• Advanced Formation Schedules – Supports up to 18 test steps with subroutines, allowing complex formation programs for Lithium-Ion and Lithium Polymer cells.
• High Channel Density – Configurable with 512 to 2048 test channels, supporting large-scale production and pilot line testing.
• Accurate Data Logging & Analysis – Logs Voltage, Current, Time, Capacity, Energy, and Cycle with high-speed data acquisition at 200 data points per second.
• Flexible Test Modes – Supports Constant Current, Constant Voltage, Constant Power, and Constant Resistance operating modes.
• Seamless Transition from Constant Current to Constant Voltage – Ensures smooth and accurate formation with no interruptions or spikes.
• High Accuracy & Resolution –
  • Voltage Measurement Range: 0 to 5V
  • Voltage Accuracy: ±5 mV
  • Voltage Resolution: 16-bit
  • Current Resolution: 16-bit
• Intelligent Cell Grading – Customizable grade profiles allow cell grading based on performance, ensuring consistent quality control.
• High Scalability & Flexibility – Combine channels in parallel to increase current capability, supporting dynamic testing requirements.
• Advanced Safety Features – Includes automatic shutdown on power failure, status recovery, and reverse voltage protection for safe operation.
• Turn-Key Solution – Complete system with PC computer and software, ensuring quick deployment and easy setup.
• Comprehensive Data Management – Automatic report generation, data backup, and processing with the MIMS Server Application.

• Enterprise-class server.
• Maximum system uptime
• Designed to run 24×7, 365 days a year
• M7© – Hosts up to 7 virtual machines representing 7 desktop computers
• M22 © – Hosts up to 22 virtual machines representing 22 desktop computers
• Server OS hosted on 2 Enterprise-grade SATA-SSD drives, RAID1
• Virtual Machines hosted on shared array qty of eight (14TB) Enterprise-grade SAS-3 hard drives, RAID6
• 2 Enterprise-grade PSU’s, 2 fans, 2 SATA Drives, 8 SAS-3 drives, all of which are hot-swappable CRU’s (customer replaceable units)

Efficient and Precise Cell Balancing

The Maccor Cell Balancer is engineered to:

• Independently charge and discharge each cell within a string, maintaining equal voltage levels across all cells.
• Optimize battery pack performance by preventing cell overcharging or over-discharging, ensuring longer cycle life and enhanced safety.
• Balance up to 8 cells per unit, with the ability to expand to larger battery packs by connecting multiple balancers in series.

Seamless Integration with Maccor Test Systems

The Maccor Cell Balancer is designed to integrate seamlessly with Maccor’s Mactest32.exe software, allowing users to:

• Incorporate cell balancing steps directly into their test procedures.
• Control and monitor cell balancing with real-time data visualization and automated data logging.
• Customize balancing parameters, including charge and discharge currents, ensuring precision and flexibilityfor different battery chemistries and configurations.