1 800 665 7301 | info@tmetrix.com

  • The 7548 Linear Amplifier is a high-output, low-noise solution engineered for precision and reliability in demanding environments.

    Key Features:

    • Up to 100 Ap / 195 Vp output
    • Delivers 12,000W peak power for 40 ms
    • Supports continuous 5,500W output into 1Ω load
    • Operates from DC to 100 kHz bandwidth
    • Field-selectable current or voltage mode
    • Ideal for MIL-STD-704F three-phase testing
    • Stackable for 800 Vp or 170 Ap system output
    • Built-in protection against over-voltage, over-temp, and overload
    • Intuitive LCD display and status indicators

     

  • Aetec 7794 High Current Industrial Amplifier

    Key Features:

    • Up to 200 Ap / 100 Vp; DC to 150 kHz bandwidth
    • Stable with resistive, inductive, or capacitive loads
    • Controlled-voltage or controlled-current operation
    • Switchable rail supply for optimized load impedance
    • 60A continuous output at 13.8V DC
    • ±95V DC and >35 V/µs slew rate
    • Four-quadrant operation: sourcing and sinking
    • Extensive protection against overvoltage, overcurrent, overtemperature
    • Rack-mountable chassis with LCD fault diagnostics

     

  • AETechron 7796 Amplifier – High-Current, Low-Impedance Industrial Power
    Ideal for precision testing, EMC simulations, and MRI systems.

    Key Features:

    • Delivers over 200 Ap peak current, up to ±180V
    • DC to 100 kHz bandwidth for versatile signal reproduction
    • Four-quadrant operation (source/sink modes)
    • Operates in both voltage and current-controlled modes
    • Handles in-rush currents up to 200A
    • Field-configurable rail supply modes for load optimization
    • Advanced protection against voltage, current, and thermal faults
    • Stackable for higher voltage or current (up to 800 Ap)

     

  • Reliable, flexible, and programmable power delivery for bench, system, and ATE applications.

    Key Features:

    • PowerFlex technology for variable V/A within power limits
    • Up to 60V and 20A, 180W or 420W per output
    • Dual or single isolated outputs
    • CV or CC operation with settings lock (S-Lock)
    • Selectable OVP trips and remote sense terminals
    • RS232, USB, LAN/LXI standard on P models
    • GPIB available as option (P models only)
    • Compact, rugged 3U quarter or half rack design
    • Analog remote control (CPX400SA model)

     

  • Compact and quiet bench power supply with precision linear regulation and a range of output options for lab or system use.

    Key Features:

    • Linear regulated bench DC power supply
    • Single, dual, and triple output options
    • Up to 56V and 5A with up to 130W output
    • 4-digit voltage and current display per output
    • Constant voltage or constant current operation
    • Switchable local/remote sensing
    • Silent, fan-free convection cooling
    • Compact design saves bench space
    • Optional RS232 or USB interfaces (on select models)
    • Auxiliary output (1.5–5V/2A) on EL302RT

     

  • A versatile bench power supply series with mixed-mode regulation, ideal for lab or system environments.

    Key Features:

    • Single, dual, or triple outputs with up to 420W power
    • Output ranges: 18V/10A, 20V/20A, 35V/5A, 42V/10A
    • Dual model: 2×35V/4A or 150V/2A (combined)
    • Triple model includes 1.5–5V/5A auxiliary output
    • Independent 4-digit meters for each output
    • Local or remote sensing with constant V or I modes
    • Silent, fan-free operation for most models
    • Compact, space-saving design
    • RS232 or USB interfaces on select models

     

  • Compact, versatile, and efficient, the FX Series is ideal for test labs, R&D, and educational use.

    Key Features:

    • PowerFlex autoranging outputs (up to 105W per channel)
    • Dual or triple output models (210W or 246W total)
    • SELV compliant and high safety design
    • Rotary, touch, and USB control options
    • Low ripple noise (<2mV), high resolution (1mV/1mA)
    • Voltage tracking and simultaneous V/I control
    • Remote USB interface with SCPI protocol
    • 25 user-defined memory presets
    • Switchable remote sense & intelligent cooling
    • Includes Test Bridge software for logging & automation

     

  • The Hioki MR6000 Memory HiCorder sets a new benchmark in waveform recording, combining cutting-edge technology, intuitive design, and world-class performance. Built from the ground up, it’s engineered to tackle both current and future measurement challenges with ease and precision.

    Key Features:

    • Large, intuitive touch panel for efficient and user-friendly operation
    • Simultaneous multi-channel isolation measurement at up to 200 MS/s (with High Speed Analog Unit U8976)
    • Significantly faster data saving for a seamless experience
    • Real-time data saving without interrupting ongoing measurements
  • The Hioki Rack-mounted Multi-channel System Recorder (MR8741/MR8740) is a powerful, high-speed, single-device solution for waveform recording and generation. Ideal for test systems, it offers high-resolution, isolated multi-channel measurements with fast sampling capabilities.

    Key Features:

    • Integrated waveform recording and generation in one device
    • Equipped with DVM Unit MR8990 for high-accuracy 24-bit resolution measurements
    • Supports up to 16 channels (MR8741) for multi-channel testing
    • Isolated input between channels and from input to chassis (up to 300 V AC/DC)
    • High-speed sampling up to 20 MS/s
    • Compact rack-mountable design (4U height, under 180 mm depth)
    • Monitor display and setting access via DVI-D and mouse
    • Enables remote measurement and control via LAN
    • Browser-based screen monitoring or advanced control via Hioki 9333 LAN Communicator
  • The Hioki Memory Recorder is a high-speed, fully-isolated data acquisition system designed for precise and simultaneous measurement of multiple analog and logic signals. Ideal for testing, simulation, and system diagnostics, it combines waveform generation and recording in one powerful unit.

    Key Features:

    • Generate and record waveforms using a single device
    • Simulate issues by outputting previously recorded problematic waveforms to test devices
    • Supports 32 analog + 32 logic channels, expandable to 28 analog + 64 logic channels
    • High-speed sampling up to 20 MS/s with fully isolated inputs
    • Ensures safe measurement with complete analog input isolation
    • Equipped with a large-capacity 512M-word memory
    • Simultaneously measures high voltage and ultra-low voltage system signals

     

  • T3PS Series – Power Supplies by Teledyne Test Tools deliver precision, flexibility, and control in a compact form for both lab and industrial use.

    Key Features:

    • Programmable and non-programmable options with up to 4 independent outputs
    • Wide voltage and current ranges up to 60 V / 200 A / 1520 W
    • Multiple display types: TFT LCD, dual numeric, high-resolution panels
    • Output modes: Constant Voltage (CV), Constant Current (CC), Constant Resistance (CR)
    • Low ripple and fast transient response: ≤1 mVrms, ≤50 µs
    • Built-in series/parallel tracking, electronic load modes, and remote sense terminals
    • Interfaces: USB, LAN, RS-232, RS-485, Analog Control, Ext I/O
    • Advanced features: OVP, OCP, UVL, programmable slew rates, panel lock
    • Ideal for use in automotive, mobile, defense, research labs, and education
  • Teledyne Test Tools T3DAQ1-16 is a powerful 16-channel Data Acquisition Unit, perfect for R&D and production testing environments.

    Key Features:

    • 16-channel input (12 multi-purpose + 4 current)
    • Built on a 6½ digit digital multimeter platform
    • Wide range of electrical measurements: voltage, current, resistance, capacitance, frequency
    • True-RMS accuracy for AC voltage and current
    • Large 4.3″ TFT LCD with dual-display views
    • Display modes: Histogram, Trend, Bar Graph, Statistics, or Number
    • USB Host, USB Device, and LAN connectivity
    • Cold terminal thermocouple compensation
    • Softkey interface for intuitive navigation
  • Key Features:

    • Single output up to 360W: Choose between 18V/20A or 35V/10A
    • Mixed-mode regulation for high accuracy and low noise
    • Fanless convection cooling for completely silent operation
    • Bench or rack mountable, front and rear terminals
    • OVP trip, high-resolution settings, and remote sense terminals
    • P models offer USB, RS232, LAN interfaces (GPIB optional)
    • Rotary, keypad, and step control for voltage and current
    • Non-volatile memory for storing up to 25 user presets
    • Seamless integration with Test Bridge software and automation systems

     

  • Applications:

    • Aerospace & Defense – Avionics, MIL-STD-704, EMC compliance, 400Hz & wild frequency testing
    • EV Charging & V2G/V2H Testing – On-board chargers, grid-tied inverters, smart grid simulation
    • Energy Storage & Renewable Systems – Home ESS, solar PV/grid-tied inverter testing
    • Industrial Power Simulation – Frequency conversion, harmonic analysis, transient simulations
    • Smart Grid & Compliance Testing – IEC 61000, RTCA DO-160, IEEE 1547, and more

     

  • Applications

    • Aerospace & Avionics – Frequency conversion (400Hz & wild frequency testing), MIL-STD compliance
    • EV Charging & Power Electronics – On-board chargers (OBC), V2G/V2H testing, battery simulation
    • Renewable Energy Systems – Solar PV/grid-tied inverter testing, home ESS & smart grid simulations
    • Power Supply & Industrial Testing – AC/DC power supply evaluation, network server & data center testing
    • Research & Development Labs – High-frequency power testing, compliance verification, transient simulations

     

  • High-Power 4-Quadrant AC & DC Power Source with Load Option

    • Powerful & Versatile: 12kVA / kW to 21kVA / kW in a 4U chassis. Parallel units up to 168kVA/kW (single cabinet)or 252kVA/kW (dual cabinet).
    • Multi-Phase Flexibility: Supports single-phase, split-phase, and three-phase configurations with AC, DC, or AC+DC output.
    • Grid Simulation & Compliance Testing: Emulates real-world power grid conditions, simulating disturbances, harmonics, and interharmonics for accurate renewable energy testing (solar inverters, EV charging, microgrid, and UPS applications).
    • Regenerative Efficiency: Over 90% energy recovery back to the grid reduces power consumption and operational costs.
    • Advanced Control & Monitoring: SmartSource Suite enables remote control via an intuitive web browser interface with LAN, USB, GPIB, and RS232 connectivity.