Products

An advanced firmware upgrade for the IM3570 that enables quick and accurate equivalent circuit analysis, ideal for in-depth component evaluation and quality control.

Key Features:

• Automatically selects the optimal equivalent circuit model from five typical options
• Minimizes discrepancies between measured and ideal frequency characteristics
• Determines acceptance/rejection of L, C, and R elements with precision
• Evaluates resonance sharpness (mechanical quality coefficient)
• Enables detailed analysis of piezoelectric elements and inductors through resonance

A high-speed, high-precision LCR meter ideal for low-ESR and impedance testing in advanced electronic components like polymer capacitors, inductors, and piezoelectric elements.

Key Features:

• Continuous LCR/DCR/sweep measurements with one instrument
• Ultra-fast testing speeds: 1.5 ms (1 kHz), 0.5 ms (100 kHz)
• High accuracy: ±0.08% basic accuracy for Z parameter
• Ideal for low-ESR measurement of functional polymer capacitors
• Suitable for resonance testing of piezoelectric elements
• Accurate DCR and L-Q testing of inductors, coils, and transformers

The Hioki IM7580A is a compact, high-speed impedance analyzer for 1 MHz to 300 MHz testing, ideal for both production and R&D. It works seamlessly with the IM9201 SMD fixture for reliable component testing.

Key Features:

• 1 MHz to 300 MHz frequency range
• 0.5 ms test speed
• ±0.72% basic accuracy
• Compact half-rack size with palm-sized test head
• Reliable contact check functions
• Frequency, level, and time sweeps in Analyzer Mode
• RF I-V method for precise measurement

The Hioki IM7581 is a compact, high-speed impedance analyzer designed for accurate testing from 100 kHz to 300 MHz. It’s ideal for both production and development environments.

Key Features:

• 100 kHz to 300 MHz frequency range
• 0.5 ms fastest test speed
• ±0.72% basic accuracy
• Compact half-rack size, palm-sized test head
• Reliable contact check via DCR, Hi-Z reject, or waveform judgment
• Supports frequency, level, and time sweeps in Analyzer Mode
• Uses RF I-V method for precise measurement

The Hioki Impedance Analyzer IM7587 3 GHz provides precision, speed, and versatility for impedance measurements from 1 MHz to 3 GHz, ideal for both R&D and mass production applications in electronic component testing.

Key Features:

• Frequency range: 1 MHz to 3 GHz
• Test speed: 0.5 ms
• Measurement variability: 0.07%
• Basic accuracy: ±0.65% reading
• RF I-V measurement technique
• Compact half-rack design with palm-sized test head
• Robust contact check capabilities
• Analyzer mode: frequency and level sweeps, time interval measurements

The Hioki Rack-mounted Multi-channel System Recorder (MR8741/MR8740) is a powerful, high-speed, single-device solution for waveform recording and generation. Ideal for test systems, it offers high-resolution, isolated multi-channel measurements with fast sampling capabilities.

Key Features:

• Integrated waveform recording and generation in one device
• Equipped with DVM Unit MR8990 for high-accuracy 24-bit resolution measurements
• Supports up to 16 channels (MR8741) for multi-channel testing
• Isolated input between channels and from input to chassis (up to 300 V AC/DC)
• High-speed sampling up to 20 MS/s
• Compact rack-mountable design (4U height, under 180 mm depth)
• Monitor display and setting access via DVI-D and mouse
• Enables remote measurement and control via LAN
• Browser-based screen monitoring or advanced control via Hioki 9333 LAN Communicator

The Hioki Memory Recorder is a high-speed, fully-isolated data acquisition system designed for precise and simultaneous measurement of multiple analog and logic signals. Ideal for testing, simulation, and system diagnostics, it combines waveform generation and recording in one powerful unit.

Key Features:

• Generate and record waveforms using a single device
• Simulate issues by outputting previously recorded problematic waveforms to test devices
• Supports 32 analog + 32 logic channels, expandable to 28 analog + 64 logic channels
• High-speed sampling up to 20 MS/s with fully isolated inputs
• Ensures safe measurement with complete analog input isolation
• Equipped with a large-capacity 512M-word memory
• Simultaneously measures high voltage and ultra-low voltage system signals

• High Accuracy & Precision – Achieves ±30 ηA accuracy on multi-current range channels, ensuring reliable and consistent results.
• Scalable Configurations – Choose from 1 to 16 channels across three series configurations, providing flexibility to expand as testing needs grow.
• Compact & Space-Efficient Design – Desktop form factor saves space while maintaining full testing capabilities.
• Comprehensive Data Collection – Log current, voltage, time, temperature, and other critical parameters with high-speed data acquisition.
• Versatile Applications – Ideal for cell and battery testing, fuel cell testing, super-capacitor testing, thermal battery testing, qualification testing, and more.
• Turn-Key System – Pre-configured software and hardware bundles ensure quick deployment and easy setup.
• Advanced Software Integration – Seamlessly integrates with Maccor’s proprietary software for automated testing, data analysis, and reporting.
• Safety & Reliability – Designed with built-in safety features to protect both users and equipment.
• High-Speed Data Logging – Collects high-resolution data for in-depth performance analysis and characterization.
• Multiple Test Modes & Sequences – Supports constant current, power, resistance, pulse, and custom waveforms for comprehensive testing scenarios.

The Maccor Cell, Battery, and Module Test Systems are perfect for:

• Battery and Cell Testing
• Module and Pack Testing
• Fuel Cell & Super-Capacitor Testing
• Research & Development
• Quality Control & Manufacturing

• Electrical energy is returned to the AC grid during discharge
• 100% duty cycle standard – No system power limit, test channel rated for continuous operation at full power, allows use in testing very high power storage batteries and EV systems
• Drive Cycle Simulation – Waveforms can be imported into the test procedure to increase test efficiency and reduce potential operator error
• Local emergency cut-off switch, automatic shutdown on loss of AC power, reverse voltage protection, internal circuit breakers – Provides a high level of safety
• Automatic scaling of data in W/kg or C-rate for drive cycle simulation programs and other test procedures – Reduces operator workload
• Real-time data and graphics – Allows battery performance to be visually monitored at any time as the test progresses

• Addressable Chamber Controllers allow multiple chambers to be controlled on a single Maccor test system.
• Chamber Temperature Set Points are set directly from Maccor’s Test System Software as a step in the test procedure.
• The compact design allows the chamber to easily fit onto a benchtop.
• If bench top and floor space are limited, the 7U height and compact design make it possible to stack up to four chambers in a standard 19” industrial rack cabinet.
• Electrical feedthroughs allow electrical connections inside the chamber while maintaining a maximum seal.
• Optional interface board can be installed inside the chamber to allow a plug-in interface that can accommodate Maccor’s molded Kelvin and coin cell holders.
• Large 3” (76 mm) diameter cable portal on the right side of the chamber.
• Non-Conducting Powder Coated Interior.

• High-Density Testing – Up to 192 test positions per rack or 32 positions per desktop unit, ensuring high-throughput testing.
• Independent Operation – Each test position operates independently, enabling simultaneous testing of multiple cells under different conditions.
• User-Programmable Multi-Step Testing – Configure constant current, power, voltage, or resistance test sequences with easy-to-use software.
• Precise Data Logging & Analysis – Logs current, voltage, time, temperature, and other critical parameters with high-speed data acquisition.
• Real-Time Monitoring & Control – Data can be viewed, plotted, and analyzed in real-time, providing instant insights into cell performance.
• Compact & Scalable Design – Available in desktop models (32 positions) and rack-mounted configurations (up to 192 positions per rack).
• Seamless Integration – Powered by Maccor’s standard test system software, ensuring consistent performance and compatibility with existing systems.
• Turn-Key Solution – Supplied as a complete system with PC and software, ensuring quick deployment and easy setup.
• Advanced Safety Features – Includes automatic shutdown on power loss, reverse voltage protection, and internal circuit breakers for safe operation.
• Versatile Applications – Suitable for single-cell testing, R&D, quality control, battery performance evaluation, and cycle life testing.

• Advanced Formation Schedules – Supports up to 18 test steps with subroutines, allowing complex formation programs for Lithium-Ion and Lithium Polymer cells.
• High Channel Density – Configurable with 512 to 2048 test channels, supporting large-scale production and pilot line testing.
• Accurate Data Logging & Analysis – Logs Voltage, Current, Time, Capacity, Energy, and Cycle with high-speed data acquisition at 200 data points per second.
• Flexible Test Modes – Supports Constant Current, Constant Voltage, Constant Power, and Constant Resistance operating modes.
• Seamless Transition from Constant Current to Constant Voltage – Ensures smooth and accurate formation with no interruptions or spikes.
• High Accuracy & Resolution –
  • Voltage Measurement Range: 0 to 5V
  • Voltage Accuracy: ±5 mV
  • Voltage Resolution: 16-bit
  • Current Resolution: 16-bit
• Intelligent Cell Grading – Customizable grade profiles allow cell grading based on performance, ensuring consistent quality control.
• High Scalability & Flexibility – Combine channels in parallel to increase current capability, supporting dynamic testing requirements.
• Advanced Safety Features – Includes automatic shutdown on power failure, status recovery, and reverse voltage protection for safe operation.
• Turn-Key Solution – Complete system with PC computer and software, ensuring quick deployment and easy setup.
• Comprehensive Data Management – Automatic report generation, data backup, and processing with the MIMS Server Application.

• Enterprise-class server.
• Maximum system uptime
• Designed to run 24×7, 365 days a year
• M7© – Hosts up to 7 virtual machines representing 7 desktop computers
• M22 © – Hosts up to 22 virtual machines representing 22 desktop computers
• Server OS hosted on 2 Enterprise-grade SATA-SSD drives, RAID1
• Virtual Machines hosted on shared array qty of eight (14TB) Enterprise-grade SAS-3 hard drives, RAID6
• 2 Enterprise-grade PSU’s, 2 fans, 2 SATA Drives, 8 SAS-3 drives, all of which are hot-swappable CRU’s (customer replaceable units)