Products

An advanced firmware upgrade for the IM3570 that enables quick and accurate equivalent circuit analysis, ideal for in-depth component evaluation and quality control.

Key Features:

• Automatically selects the optimal equivalent circuit model from five typical options
• Minimizes discrepancies between measured and ideal frequency characteristics
• Determines acceptance/rejection of L, C, and R elements with precision
• Evaluates resonance sharpness (mechanical quality coefficient)
• Enables detailed analysis of piezoelectric elements and inductors through resonance

HDA125 High-Speed Digital Analyzer brings advanced logic analysis capabilities to your existing Teledyne LeCroy oscilloscopes. Compact, accurate, and versatile.

Key Features:

• 12.5 GS/s sample rate for high-speed digital capture
• Supports up to 18 digital channels
• Compatible with WaveMaster/SDA 8 Zi-B and LabMaster 10Zi-A oscilloscopes
• QuickLink Probe System for fast, low-impact signal access
• 3 GHz bandwidth and 80 ps timing accuracy
• Command bus decoding for in-depth DDR/LPDDR memory debugging
• Minimal signal loading with 110 kΩ, 0.12 pF tip impedance
• Cost-effective QuickLink solder-in tips simplify multi-point testing
• Ideal for mixed-signal, high-speed, and memory interface debugging

A high-speed, high-precision LCR meter ideal for low-ESR and impedance testing in advanced electronic components like polymer capacitors, inductors, and piezoelectric elements.

Key Features:

• Continuous LCR/DCR/sweep measurements with one instrument
• Ultra-fast testing speeds: 1.5 ms (1 kHz), 0.5 ms (100 kHz)
• High accuracy: ±0.08% basic accuracy for Z parameter
• Ideal for low-ESR measurement of functional polymer capacitors
• Suitable for resonance testing of piezoelectric elements
• Accurate DCR and L-Q testing of inductors, coils, and transformers

The Hioki IM7580A is a compact, high-speed impedance analyzer for 1 MHz to 300 MHz testing, ideal for both production and R&D. It works seamlessly with the IM9201 SMD fixture for reliable component testing.

Key Features:

• 1 MHz to 300 MHz frequency range
• 0.5 ms test speed
• ±0.72% basic accuracy
• Compact half-rack size with palm-sized test head
• Reliable contact check functions
• Frequency, level, and time sweeps in Analyzer Mode
• RF I-V method for precise measurement

The Hioki IM7581 is a compact, high-speed impedance analyzer designed for accurate testing from 100 kHz to 300 MHz. It’s ideal for both production and development environments.

Key Features:

• 100 kHz to 300 MHz frequency range
• 0.5 ms fastest test speed
• ±0.72% basic accuracy
• Compact half-rack size, palm-sized test head
• Reliable contact check via DCR, Hi-Z reject, or waveform judgment
• Supports frequency, level, and time sweeps in Analyzer Mode
• Uses RF I-V method for precise measurement

The Hioki Impedance Analyzer IM7587 3 GHz provides precision, speed, and versatility for impedance measurements from 1 MHz to 3 GHz, ideal for both R&D and mass production applications in electronic component testing.

Key Features:

• Frequency range: 1 MHz to 3 GHz
• Test speed: 0.5 ms
• Measurement variability: 0.07%
• Basic accuracy: ±0.65% reading
• RF I-V measurement technique
• Compact half-rack design with palm-sized test head
• Robust contact check capabilities
• Analyzer mode: frequency and level sweeps, time interval measurements

The Hioki Rack-mounted Multi-channel System Recorder (MR8741/MR8740) is a powerful, high-speed, single-device solution for waveform recording and generation. Ideal for test systems, it offers high-resolution, isolated multi-channel measurements with fast sampling capabilities.

Key Features:

• Integrated waveform recording and generation in one device
• Equipped with DVM Unit MR8990 for high-accuracy 24-bit resolution measurements
• Supports up to 16 channels (MR8741) for multi-channel testing
• Isolated input between channels and from input to chassis (up to 300 V AC/DC)
• High-speed sampling up to 20 MS/s
• Compact rack-mountable design (4U height, under 180 mm depth)
• Monitor display and setting access via DVI-D and mouse
• Enables remote measurement and control via LAN
• Browser-based screen monitoring or advanced control via Hioki 9333 LAN Communicator

The Hioki Memory Recorder is a high-speed, fully-isolated data acquisition system designed for precise and simultaneous measurement of multiple analog and logic signals. Ideal for testing, simulation, and system diagnostics, it combines waveform generation and recording in one powerful unit.

Key Features:

• Generate and record waveforms using a single device
• Simulate issues by outputting previously recorded problematic waveforms to test devices
• Supports 32 analog + 32 logic channels, expandable to 28 analog + 64 logic channels
• High-speed sampling up to 20 MS/s with fully isolated inputs
• Ensures safe measurement with complete analog input isolation
• Equipped with a large-capacity 512M-word memory
• Simultaneously measures high voltage and ultra-low voltage system signals

The Teledyne T3SA Series Spectrum Analyzers deliver high-performance signal analysis from 9 kHz to 3.2 GHz in a compact, easy-to-use design. Ideal for R&D, education, production, and pre-compliance testing, it features a large touchscreen and advanced digital IF technology.

Key Features:

• All Digital IF technology10.1”
• WVGA (1024 x 600) touchscreen display
• Frequency range from 9 kHz to 3.2 GHz
• -161 dBm/Hz displayed average noise level (typical)
• -98 dBc/Hz @ 10 kHz offset phase noise (typical)
• Total amplitude accuracy < 0.7 dB
• 1 Hz minimum resolution bandwidth (RBW)
• Built-in preamplifier for improved sensitivity

Typical Applications

● Research Laboratory
● Development Laboratory
● Repair and Maintenance
● Calibration Laboratory
● Automatic Production Test
● General bench-top use

Teledyne Test Tools T3DAQ1-16 is a powerful 16-channel Data Acquisition Unit, perfect for R&D and production testing environments.

Key Features:

• 16-channel input (12 multi-purpose + 4 current)
• Built on a 6½ digit digital multimeter platform
• Wide range of electrical measurements: voltage, current, resistance, capacitance, frequency
• True-RMS accuracy for AC voltage and current
• Large 4.3″ TFT LCD with dual-display views
• Display modes: Histogram, Trend, Bar Graph, Statistics, or Number
• USB Host, USB Device, and LAN connectivity
• Cold terminal thermocouple compensation
• Softkey interface for intuitive navigation

The T3VNA Series from Teledyne Test Tools is a powerful, compact solution for engineers who demand precision and versatility in RF and spectrum analysis.

Key Features:

• Vector Network Analysis from 10 MHz to 3.2 GHz
• Spectrum Analysis from 9 kHz to 3.2 GHz
• All-digital IF technology for clean signal processing
• Built-in tracking generator (up to 1.5 GHz)
• Advanced features like Distance-to-Fault, OBW, ACPR
• -156 dBm/Hz typical displayed average noise level
• -98 dBc/Hz @ 10 kHz offset phase noise
• 1 Hz minimum RBW for high-resolution measurements
• 10.1″ WVGA display for smooth operation
• High accuracy with <1.2 dB amplitude error

• Superior Noise Reduction – Attenuates up to 24 dBA, making it perfect for quiet office environments.
• Efficient Cooling – Six ultra-quiet fans expel up to 3 kW of thermal heat.
• Flexible Installation – Available in 24U, 35U, and 44U heights with 36” and 42” depths.
• Durable Construction – Made from 12-gauge US-finished steel with a maximum load capacity of 2,000 lbs.
• Comprehensive Security – Key lockable front and rear doors, with optional locking side panels.
• Acoustic Lined Panels – Fully lined with sound-absorbing material for maximum noise control.
• Versatile Color Options – Available in 7 standard colors including Black, Pearl White, Granite, Platinum, White, Dark Grey, and Blue.
• Complete Accessibility – Removable side panels for easy installation and maintenance.
• Integrated Temperature Display – Real-time temperature monitoring with remote sensor support.
• Cable Management – Bottom rear cable entry accommodates up to 500 CAT 5 cables.

Ideal for:

• Small & Medium Businesses – Deploy IT infrastructure without dedicated server rooms.
• Edge Computing – Reduce latency and bandwidth strain with localized computing.
• Secure Data Centers – Enhance equipment security & environmental control.

With its compact footprint, advanced cooling, and soundproofing technology, the EDGE 3 enclosure offers a quiet, efficient, and scalable alternative to traditional server rooms.

Customizable Configurations for Any Environment

• Freestanding cabinets with adjustable 19” EIA square hole rails and depths of up to 38”.
• Wall-mounted units (cold-rolled steel or stainless steel) available in 12U and 19U sizes.
• Outdoor-ready enclosures for harsh industrial conditions.

Ideal for:

• Telecom & Network Infrastructure
• Industrial Automation & Edge Computing
• Smart Grid & IoT Deployments
• Military & Government Facilities

The KARIS SRK Precision Cooling Cabinets are a space-saving, cost-effective solution for securely housing IT and industrial equipment while maintaining optimal environmental conditions.