Products

A precision AC power supply designed for EMC testing, pre-compliance setups, and product development labs.

Key Features:

• 1000W power output at 230V
• Low harmonic distortion for clean AC testing
• Delivers up to 4.4A RMS and 10A peak currents
• EN61000–3–2 compliant for harmonic emissions
• Available with UK, Schuko, or USA sockets
• Comprehensive built-in overload protection
• Simple connection via standard power connectors

An advanced firmware upgrade for the IM3570 that enables quick and accurate equivalent circuit analysis, ideal for in-depth component evaluation and quality control.

Key Features:

• Automatically selects the optimal equivalent circuit model from five typical options
• Minimizes discrepancies between measured and ideal frequency characteristics
• Determines acceptance/rejection of L, C, and R elements with precision
• Evaluates resonance sharpness (mechanical quality coefficient)
• Enables detailed analysis of piezoelectric elements and inductors through resonance

High-performance analyzer for compliance testing to EN61000-3-2 and EN61000-3-3 with real-time harmonic and waveform data display.

Key Features:

• Complies with EN61000-3-2 and EN61000-3-3 standards
• Measures rms/peak voltage & current, power, PF, phase
• Histogram display for 40 harmonics
• Voltage & current waveform visualization
• Real-time graphical updates for live analysis
• High-contrast 320 x 240 pixel LCD
• USB, RS232, and printer interfaces
• HA-PC-Link+ software included for full PC control
• Available with UK, Schuko, or US sockets

HDA125 High-Speed Digital Analyzer brings advanced logic analysis capabilities to your existing Teledyne LeCroy oscilloscopes. Compact, accurate, and versatile.

Key Features:

• 12.5 GS/s sample rate for high-speed digital capture
• Supports up to 18 digital channels
• Compatible with WaveMaster/SDA 8 Zi-B and LabMaster 10Zi-A oscilloscopes
• QuickLink Probe System for fast, low-impact signal access
• 3 GHz bandwidth and 80 ps timing accuracy
• Command bus decoding for in-depth DDR/LPDDR memory debugging
• Minimal signal loading with 110 kΩ, 0.12 pF tip impedance
• Cost-effective QuickLink solder-in tips simplify multi-point testing
• Ideal for mixed-signal, high-speed, and memory interface debugging

Key Features:

• High-precision EIS measurement for EV and ESS battery testing
• Frequency range: 0.01 Hz to 1.05 kHz for versatile impedance analysis
• Measures impedance, voltage, and temperature simultaneously
• Supports Nyquist (Cole-Cole) plotting for battery R&D
• Four-terminal pair probes reduce magnetic flux for stable measurements
• LAN interface enables multi-channel testing and integration into production systems
• Compatible with third-party equivalent circuit analysis software
• Reliable for both R&D and manufacturing applications

The Hioki IR5050 High Voltage Insulation Tester delivers precise and reliable insulation resistance testing up to 5 kV and 10 TΩ. Designed for professionals, it offers advanced diagnostics, wireless connectivity, and rugged durability — making it ideal for industrial maintenance and electrical testing.

Key Features:

• Measures insulation resistance up to 10 TΩ
• Test voltages from 250 V to 5000 V DC
• Calculates and displays PI, DAR, and DD diagnostics automatically
• Supports both wireless (Bluetooth) and USB data transfer
• Compact, lightweight design with IP65-rated carrying case
• Step and ramp voltage testing for advanced insulation analysis
• CAT IV and CAT III safety ratings for enhanced protection
• Compatible with GENNECT Cross app for real-time reporting

Key Features:

• Safely measure solar PV insulation resistance while generating power
• CAT III 2000 V and CAT IV 1000 V safety rating for reliable high-voltage testing
• 5 kV test voltage and 10 TΩ insulation resistance range
• Specialized PV insulation measurement mode compliant with IEC 62446-1
• Automatically calculates and displays PI, DAR, and DD diagnostics
• Flexible voltage adjustment from 250 V to 5000 V
• Data memory with wireless and USB connectivity options
• Compact, lightweight design with IP65-rated carrying case for durability

A high-speed, high-precision LCR meter ideal for low-ESR and impedance testing in advanced electronic components like polymer capacitors, inductors, and piezoelectric elements.

Key Features:

• Continuous LCR/DCR/sweep measurements with one instrument
• Ultra-fast testing speeds: 1.5 ms (1 kHz), 0.5 ms (100 kHz)
• High accuracy: ±0.08% basic accuracy for Z parameter
• Ideal for low-ESR measurement of functional polymer capacitors
• Suitable for resonance testing of piezoelectric elements
• Accurate DCR and L-Q testing of inductors, coils, and transformers

The Hioki IM7580A is a compact, high-speed impedance analyzer for 1 MHz to 300 MHz testing, ideal for both production and R&D. It works seamlessly with the IM9201 SMD fixture for reliable component testing.

Key Features:

• 1 MHz to 300 MHz frequency range
• 0.5 ms test speed
• ±0.72% basic accuracy
• Compact half-rack size with palm-sized test head
• Reliable contact check functions
• Frequency, level, and time sweeps in Analyzer Mode
• RF I-V method for precise measurement

The Hioki IM7581 is a compact, high-speed impedance analyzer designed for accurate testing from 100 kHz to 300 MHz. It’s ideal for both production and development environments.

Key Features:

• 100 kHz to 300 MHz frequency range
• 0.5 ms fastest test speed
• ±0.72% basic accuracy
• Compact half-rack size, palm-sized test head
• Reliable contact check via DCR, Hi-Z reject, or waveform judgment
• Supports frequency, level, and time sweeps in Analyzer Mode
• Uses RF I-V method for precise measurement

The Hioki Impedance Analyzer IM7587 3 GHz provides precision, speed, and versatility for impedance measurements from 1 MHz to 3 GHz, ideal for both R&D and mass production applications in electronic component testing.

Key Features:

• Frequency range: 1 MHz to 3 GHz
• Test speed: 0.5 ms
• Measurement variability: 0.07%
• Basic accuracy: ±0.65% reading
• RF I-V measurement technique
• Compact half-rack design with palm-sized test head
• Robust contact check capabilities
• Analyzer mode: frequency and level sweeps, time interval measurements

The Hioki Rack-mounted Multi-channel System Recorder (MR8741/MR8740) is a powerful, high-speed, single-device solution for waveform recording and generation. Ideal for test systems, it offers high-resolution, isolated multi-channel measurements with fast sampling capabilities.

Key Features:

• Integrated waveform recording and generation in one device
• Equipped with DVM Unit MR8990 for high-accuracy 24-bit resolution measurements
• Supports up to 16 channels (MR8741) for multi-channel testing
• Isolated input between channels and from input to chassis (up to 300 V AC/DC)
• High-speed sampling up to 20 MS/s
• Compact rack-mountable design (4U height, under 180 mm depth)
• Monitor display and setting access via DVI-D and mouse
• Enables remote measurement and control via LAN
• Browser-based screen monitoring or advanced control via Hioki 9333 LAN Communicator

The Hioki Memory Recorder is a high-speed, fully-isolated data acquisition system designed for precise and simultaneous measurement of multiple analog and logic signals. Ideal for testing, simulation, and system diagnostics, it combines waveform generation and recording in one powerful unit.

Key Features:

• Generate and record waveforms using a single device
• Simulate issues by outputting previously recorded problematic waveforms to test devices
• Supports 32 analog + 32 logic channels, expandable to 28 analog + 64 logic channels
• High-speed sampling up to 20 MS/s with fully isolated inputs
• Ensures safe measurement with complete analog input isolation
• Equipped with a large-capacity 512M-word memory
• Simultaneously measures high voltage and ultra-low voltage system signals

Experience precision RF signal analysis on the go with this lightweight, handheld analyzer designed for both lab and field use.

Key Features:

• Frequency range: 1MHz to 1.3GHz (PSA1303) or 2.7GHz (PSA2703)
• RBW: 300Hz to 10MHz
• -115dBm typical noise floor
• Dual markers with absolute/difference values
• AM/FM demodulation in zero span
• Auto-find & smart marker peak tracking
• USB for waveform saving and PC connection
• Live, View, and Reference trace modes
• 6-hour lithium-ion battery operation
• Weighs just 0.58 kg
• Optional U01 Upgrade: Limit lines, data logging, triggering, compensation tables