1 800 665 7301 | info@tmetrix.com

  • A high-performance analyzer designed for R&D applications involving electrochemical components, materials, batteries, and EDLCs. It enables precise impedance measurements essential for advanced evaluation and development.

    Key Features:

    • Wide frequency range: 1 mHz to 200 kHz for detailed ion and solution behavior analysis
    • Dual function: High-speed continuous LCR and sweep measurements with one device
    • Battery analysis: Measures internal impedance under no-load conditions
    • Ultra-fast sweep: Perform measurements in as little as 2 ms
    • High accuracy: ±0.05% basic precision for reliable R&D and testing
    • Advanced analysis: Supports Cole-Cole plots and equivalent-circuit modeling for electrochemical studies
  • Teledyne Test Tools Digital Power Meters provide reliable, high-precision AC and DC power measurements in a compact design. Ideal for R&D, QA, and compliance testing.

    Key Features:

    • Bandwidth: DC, 0.1 Hz to 100 kHz
    • High-resolution 4″ and 5″ TFT LCD displays
    • 19 power measurement parameters
    • 16-bit ADC and 300 kHz sampling rate (T3PM1100)
    • Waveform, harmonic, and integration functions
    • External current sensor input (T3PM1100)
    • Supports IEC 62301 and IEC 61000-4-7 standards
    • Interfaces: USB, LAN, RS-232C
    • Front/rear terminal inputs for flexible testing

     

  • An advanced firmware upgrade for the IM3570 that enables quick and accurate equivalent circuit analysis, ideal for in-depth component evaluation and quality control.

    Key Features:

    • Automatically selects the optimal equivalent circuit model from five typical options
    • Minimizes discrepancies between measured and ideal frequency characteristics
    • Determines acceptance/rejection of L, C, and R elements with precision
    • Evaluates resonance sharpness (mechanical quality coefficient)
    • Enables detailed analysis of piezoelectric elements and inductors through resonance
  • HDA125 High-Speed Digital Analyzer brings advanced logic analysis capabilities to your existing Teledyne LeCroy oscilloscopes. Compact, accurate, and versatile.

    Key Features:

    • 12.5 GS/s sample rate for high-speed digital capture
    • Supports up to 18 digital channels
    • Compatible with WaveMaster/SDA 8 Zi-B and LabMaster 10Zi-A oscilloscopes
    • QuickLink Probe System for fast, low-impact signal access
    • 3 GHz bandwidth and 80 ps timing accuracy
    • Command bus decoding for in-depth DDR/LPDDR memory debugging
    • Minimal signal loading with 110 kΩ, 0.12 pF tip impedance
    • Cost-effective QuickLink solder-in tips simplify multi-point testing
    • Ideal for mixed-signal, high-speed, and memory interface debugging
  • A high-speed, high-precision LCR meter ideal for low-ESR and impedance testing in advanced electronic components like polymer capacitors, inductors, and piezoelectric elements.

    Key Features:

    • Continuous LCR/DCR/sweep measurements with one instrument
    • Ultra-fast testing speeds: 1.5 ms (1 kHz), 0.5 ms (100 kHz)
    • High accuracy: ±0.08% basic accuracy for Z parameter
    • Ideal for low-ESR measurement of functional polymer capacitors
    • Suitable for resonance testing of piezoelectric elements
    • Accurate DCR and L-Q testing of inductors, coils, and transformers
  • The Hioki IM7580A is a compact, high-speed impedance analyzer for 1 MHz to 300 MHz testing, ideal for both production and R&D. It works seamlessly with the IM9201 SMD fixture for reliable component testing.

    Key Features:

    • 1 MHz to 300 MHz frequency range
    • 0.5 ms test speed
    • ±0.72% basic accuracy
    • Compact half-rack size with palm-sized test head
    • Reliable contact check functions
    • Frequency, level, and time sweeps in Analyzer Mode
    • RF I-V method for precise measurement
  • The Hioki IM7581 is a compact, high-speed impedance analyzer designed for accurate testing from 100 kHz to 300 MHz. It’s ideal for both production and development environments.

    Key Features:

    • 100 kHz to 300 MHz frequency range
    • 0.5 ms fastest test speed
    • ±0.72% basic accuracy
    • Compact half-rack size, palm-sized test head
    • Reliable contact check via DCR, Hi-Z reject, or waveform judgment
    • Supports frequency, level, and time sweeps in Analyzer Mode
    • Uses RF I-V method for precise measurement
  • The Hioki Impedance Analyzer IM7587 3 GHz provides precision, speed, and versatility for impedance measurements from 1 MHz to 3 GHz, ideal for both R&D and mass production applications in electronic component testing.

    Key Features:

    • Frequency range: 1 MHz to 3 GHz
    • Test speed: 0.5 ms
    • Measurement variability: 0.07%
    • Basic accuracy: ±0.65% reading
    • RF I-V measurement technique
    • Compact half-rack design with palm-sized test head
    • Robust contact check capabilities
    • Analyzer mode: frequency and level sweeps, time interval measurements
  • T3DMM Series – Digital Multimeters deliver precision, speed, and display-rich features, ideal for professional labs, R&D, and production testing.

    Key Features:

    • Available in 4.5-digit (60,000 counts) and 6.5-digit (2,200,000 counts) models
    • True RMS AC voltage and current measurement
    • 4.3” TFT-LCD with 480×272 resolution
    • Multiple display modes: Number, Histogram, Trend Chart, Bar Meter, Statistics
    • Advanced math functions: Max, Min, Avg, Std Dev, dBm/dB, Relative, Pass/Fail
    • Supports remote operation via USB, LAN, SCPI commands
    • Built-in cold terminal thermocouple compensation
    • Wide range of measurements: Voltage, Current, Resistance, Capacitance, Frequency, Period, Temperature
    • Internal 1GB storage and USB host for external data access
    • User-friendly softkey interface and built-in help system
  • The Teledyne T3SA Series Spectrum Analyzers deliver high-performance signal analysis from 9 kHz to 3.2 GHz in a compact, easy-to-use design. Ideal for R&D, education, production, and pre-compliance testing, it features a large touchscreen and advanced digital IF technology.

    Key Features:

    • All Digital IF technology10.1”
    • WVGA (1024 x 600) touchscreen display
    • Frequency range from 9 kHz to 3.2 GHz
    • -161 dBm/Hz displayed average noise level (typical)
    • -98 dBc/Hz @ 10 kHz offset phase noise (typical)
    • Total amplitude accuracy < 0.7 dB
    • 1 Hz minimum resolution bandwidth (RBW)
    • Built-in preamplifier for improved sensitivity

    Typical Applications

    ● Research Laboratory
    ● Development Laboratory
    ● Repair and Maintenance
    ● Calibration Laboratory
    ● Automatic Production Test
    ● General bench-top use

  • The T3VNA Series from Teledyne Test Tools is a powerful, compact solution for engineers who demand precision and versatility in RF and spectrum analysis.

    Key Features:

    • Vector Network Analysis from 10 MHz to 3.2 GHz
    • Spectrum Analysis from 9 kHz to 3.2 GHz
    • All-digital IF technology for clean signal processing
    • Built-in tracking generator (up to 1.5 GHz)
    • Advanced features like Distance-to-Fault, OBW, ACPR
    • -156 dBm/Hz typical displayed average noise level
    • -98 dBc/Hz @ 10 kHz offset phase noise
    • 1 Hz minimum RBW for high-resolution measurements
    • 10.1″ WVGA display for smooth operation
    • High accuracy with <1.2 dB amplitude error
  • Single Phase Power Meter Compatible with DC Measurement and Current/Power Integration Measurement

    Key Features:

    • Compatible with the SPECpower® (*1) benchmarking for server power consumption
    • DC measurement mode, AC, and AC+DC measurement
    • Integration function for current and power
    • ±0.1% high basic accuracy (*2) For complete details, please refer to the specifications)
    • Extended period of guaranteed accuracy of 3 years
    • Complete accuracy over a wide input range

     

  • The EME Guard Plus is a lightweight and robust personal protection monitor designed to ensure the safety of workers operating near electromagnetic field (EMF) emitters such as antennas, radars, and base stations. With a frequency range of 1 MHz to 40 GHz, this device continuously monitors and records EMF exposure levels while providing immediate audio, visual, and vibrating alerts when exposure exceeds predefined safety thresholds. Customizable alarm settings and a triaxial isotropic probe ensure accurate and reliable measurements.

     

  • The EME Guard XS Radar is a state-of-the-art RF safety monitor, specifically designed for workers operating near radar transmitters and antennas. With its isotropic tri-axis E-field sensors, this compact device provides continuous EMF monitoring over a frequency range of 1 MHz to 40 GHz, including short pulsed signal detection. Equipped with audio and visual alarms, it alerts users instantly when EMF exposure exceeds predefined safety thresholds, creating a safer working environment for military, aviation, and telecom personnel.

     

  • Solutions For:

    •  Accurate measurement with tri-axis sensors
    • Instant audio and visual alarm
    • Robust, reliable and user-friendly
    • Covers 5G / 6G bands, measuring up to 71 GHz

    User profile:

    • Persons working near antennas including installation and maintenance workers, broadcast, PMR and mobile phone operators or regulatory body employees

    Measurement capabilities:

    • Continuous monitoring of Electromagnetic Field levels with isotropic tri-axis E-field sensors
    • EMF Level indicated by a LED color scale
    • Audio and visual alarms triggered when EMF exceeds the reference level
  • Pencil-style Pocket Digital Multimeter for General Electrical Maintenance, Testing and Hobbyists

    Key Features:

    • Test lead and main unit in a single body
    • Overload protection to 600 V at resistance or continuity functions
    • LED light brightly illuminates test points