Products

A turnkey solution for harmonics and flicker compliance, this system delivers powerful, efficient, and automated testing for today’s high-power demands.

Key Features:

• Fully compliant with IEC/EN 61000-3-2, -3-3, -3-11, and -3-12
• High-power testing up to 75 A and 50 kVA
• Regenerative AC power supply with energy recovery
• Programmable simulation: voltage, frequency, harmonics, interharmonics
• Precision impedance network for accurate flicker measurements
• Advanced power analyzer with harmonic and flicker metering
• Preloaded test sequences with automated software control
• Expandable to include dips, swells, and short interruptions

HDA125 High-Speed Digital Analyzer brings advanced logic analysis capabilities to your existing Teledyne LeCroy oscilloscopes. Compact, accurate, and versatile.

Key Features:

• 12.5 GS/s sample rate for high-speed digital capture
• Supports up to 18 digital channels
• Compatible with WaveMaster/SDA 8 Zi-B and LabMaster 10Zi-A oscilloscopes
• QuickLink Probe System for fast, low-impact signal access
• 3 GHz bandwidth and 80 ps timing accuracy
• Command bus decoding for in-depth DDR/LPDDR memory debugging
• Minimal signal loading with 110 kΩ, 0.12 pF tip impedance
• Cost-effective QuickLink solder-in tips simplify multi-point testing
• Ideal for mixed-signal, high-speed, and memory interface debugging

Engineered for cutting-edge EV, automotive, and aerospace compliance, the HVR 1000 is a complete high-voltage ripple test system built to handle demanding lab environments with unmatched precision and safety.

Key Features:

• Wide Frequency Range: AC ripple from 10 Hz to 200 kHz
• High Voltage Output: Up to 1000V DC and 60 kW power
• Waveform Versatility: Generates sine, triangle, and custom signals
• Robust Safety: Multi-layer overvoltage, overcurrent, and thermal protection
• Zero Licensing Fees: Future test standard updates included
• User-Centric Interface: Intuitive controls with HDMI and LAN support
• Flexible Configuration: Available as HVR 1000RG (Ripple Generator only)
• Space-Saving Design: Small footprint, ideal for compact lab setups

The HVR 1200RG Ripple Generator is a powerful, next-gen solution tailored for electric vehicle high-voltage testing. Designed for use with traction inverters and HIL test stands, this rugged system delivers unmatched ripple current and voltage capabilities across a wide frequency range.

Key Features:

• Ripple Current Output: Up to 600 A peak
• Voltage Range: 0 – 150 Vp (300 Vp-p)
• Wide Frequency Support: 150 Hz to 300 kHz
• DC Voltage Compatibility: 0 – 1200 V (or up to 2000 V in bridged mode)
• Data Monitoring: Real-time tracking of voltage, current, and impedance
• Built-In Protections: Handles short circuits and noisy DUTs effortlessly
• Modular & Expandable: Configurable for current and future EV standards
• Noise-Resistant: Engineered to operate accurately in high-noise environments

A high-speed, high-precision LCR meter ideal for low-ESR and impedance testing in advanced electronic components like polymer capacitors, inductors, and piezoelectric elements.

Key Features:

• Continuous LCR/DCR/sweep measurements with one instrument
• Ultra-fast testing speeds: 1.5 ms (1 kHz), 0.5 ms (100 kHz)
• High accuracy: ±0.08% basic accuracy for Z parameter
• Ideal for low-ESR measurement of functional polymer capacitors
• Suitable for resonance testing of piezoelectric elements
• Accurate DCR and L-Q testing of inductors, coils, and transformers

The Hioki IM7580A is a compact, high-speed impedance analyzer for 1 MHz to 300 MHz testing, ideal for both production and R&D. It works seamlessly with the IM9201 SMD fixture for reliable component testing.

Key Features:

• 1 MHz to 300 MHz frequency range
• 0.5 ms test speed
• ±0.72% basic accuracy
• Compact half-rack size with palm-sized test head
• Reliable contact check functions
• Frequency, level, and time sweeps in Analyzer Mode
• RF I-V method for precise measurement

The Hioki IM7581 is a compact, high-speed impedance analyzer designed for accurate testing from 100 kHz to 300 MHz. It’s ideal for both production and development environments.

Key Features:

• 100 kHz to 300 MHz frequency range
• 0.5 ms fastest test speed
• ±0.72% basic accuracy
• Compact half-rack size, palm-sized test head
• Reliable contact check via DCR, Hi-Z reject, or waveform judgment
• Supports frequency, level, and time sweeps in Analyzer Mode
• Uses RF I-V method for precise measurement

The Hioki Impedance Analyzer IM7587 3 GHz provides precision, speed, and versatility for impedance measurements from 1 MHz to 3 GHz, ideal for both R&D and mass production applications in electronic component testing.

Key Features:

• Frequency range: 1 MHz to 3 GHz
• Test speed: 0.5 ms
• Measurement variability: 0.07%
• Basic accuracy: ±0.65% reading
• RF I-V measurement technique
• Compact half-rack design with palm-sized test head
• Robust contact check capabilities
• Analyzer mode: frequency and level sweeps, time interval measurements

A compact, high-performance power supply for automotive EMC and battery voltage simulation.

Key Features:

• Battery simulator for 12V, 24V, 42V, and 48V systems
• Output: 0–66V / 0–55A (max)
• Fast voltage rise time up to 100V/µs
• ISO 7637-2 and ISO 16750-2 compliant
• Remote control via CAR-Remote Software
• Impulse Recording Function (IRF) included
• Compact 19-inch desktop form (15 kg only)
• Overvoltage and thermal protection
• Slew rate: 10V/µs with fan cooling system
• Compatible with HILO CAR-SYS test systems

High-performance power simulator designed for advanced EMC and automotive voltage testing.

Key Features:

• Supports 12V, 24V, 42V, 48V, and 70V automotive systems
• Battery simulation with up to 220A current
• Fast voltage rise time up to 100V/µs
• ISO 7637-2 and ISO 16750-2 compliant
• Integrated Impulse Recording Function (IRF)
• Full remote control via CAR-Remote software
• Ethernet interface and built-in safety interlock
• Cooling via fans and heat sink for reliable operation
• Compact 19-inch rackmount desktop system (60 kg)
• Overvoltage and thermal protection included

Experience precision RF signal analysis on the go with this lightweight, handheld analyzer designed for both lab and field use.

Key Features:

• Frequency range: 1MHz to 1.3GHz (PSA1303) or 2.7GHz (PSA2703)
• RBW: 300Hz to 10MHz
• -115dBm typical noise floor
• Dual markers with absolute/difference values
• AM/FM demodulation in zero span
• Auto-find & smart marker peak tracking
• USB for waveform saving and PC connection
• Live, View, and Reference trace modes
• 6-hour lithium-ion battery operation
• Weighs just 0.58 kg
• Optional U01 Upgrade: Limit lines, data logging, triggering, compensation tables

High-performance, battery-powered spectrum analyzers ideal for RF engineers and field use.

Key Features:

• Frequency range: 10MHz to 3.6GHz or 6.0GHz
• -120dBm typical noise floor
• Resolution bandwidths from 300Hz to 10MHz
• AM/FM audio demodulation with zero span
• Live, View & Reference traces with markers
• Smart marker tracking with peak detection
• USB data logging & real-time PC view
• Compact, lightweight (0.56 kg) with >3hr battery
• Optional U02 features: limit lines, OBW, ACPR, AM/FM waveform demodulation

The Teledyne T3SA Series Spectrum Analyzers deliver high-performance signal analysis from 9 kHz to 3.2 GHz in a compact, easy-to-use design. Ideal for R&D, education, production, and pre-compliance testing, it features a large touchscreen and advanced digital IF technology.

Key Features:

• All Digital IF technology10.1”
• WVGA (1024 x 600) touchscreen display
• Frequency range from 9 kHz to 3.2 GHz
• -161 dBm/Hz displayed average noise level (typical)
• -98 dBc/Hz @ 10 kHz offset phase noise (typical)
• Total amplitude accuracy < 0.7 dB
• 1 Hz minimum resolution bandwidth (RBW)
• Built-in preamplifier for improved sensitivity

Typical Applications

● Research Laboratory
● Development Laboratory
● Repair and Maintenance
● Calibration Laboratory
● Automatic Production Test
● General bench-top use

The T3VNA Series from Teledyne Test Tools is a powerful, compact solution for engineers who demand precision and versatility in RF and spectrum analysis.

Key Features:

• Vector Network Analysis from 10 MHz to 3.2 GHz
• Spectrum Analysis from 9 kHz to 3.2 GHz
• All-digital IF technology for clean signal processing
• Built-in tracking generator (up to 1.5 GHz)
• Advanced features like Distance-to-Fault, OBW, ACPR
• -156 dBm/Hz typical displayed average noise level
• -98 dBc/Hz @ 10 kHz offset phase noise
• 1 Hz minimum RBW for high-resolution measurements
• 10.1″ WVGA display for smooth operation
• High accuracy with <1.2 dB amplitude error

The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields – including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price. IEC 60601-1-2 calling out IEC 61000-4-39 magnetic immunity for close proximity testing requirements can also now be met with the 10 kHz unit.