Products

High-performance analyzer for compliance testing to EN61000-3-2 and EN61000-3-3 with real-time harmonic and waveform data display.

Key Features:

• Complies with EN61000-3-2 and EN61000-3-3 standards
• Measures rms/peak voltage & current, power, PF, phase
• Histogram display for 40 harmonics
• Voltage & current waveform visualization
• Real-time graphical updates for live analysis
• High-contrast 320 x 240 pixel LCD
• USB, RS232, and printer interfaces
• HA-PC-Link+ software included for full PC control
• Available with UK, Schuko, or US sockets

HDA125 High-Speed Digital Analyzer brings advanced logic analysis capabilities to your existing Teledyne LeCroy oscilloscopes. Compact, accurate, and versatile.

Key Features:

• 12.5 GS/s sample rate for high-speed digital capture
• Supports up to 18 digital channels
• Compatible with WaveMaster/SDA 8 Zi-B and LabMaster 10Zi-A oscilloscopes
• QuickLink Probe System for fast, low-impact signal access
• 3 GHz bandwidth and 80 ps timing accuracy
• Command bus decoding for in-depth DDR/LPDDR memory debugging
• Minimal signal loading with 110 kΩ, 0.12 pF tip impedance
• Cost-effective QuickLink solder-in tips simplify multi-point testing
• Ideal for mixed-signal, high-speed, and memory interface debugging

A high-speed, high-precision LCR meter ideal for low-ESR and impedance testing in advanced electronic components like polymer capacitors, inductors, and piezoelectric elements.

Key Features:

• Continuous LCR/DCR/sweep measurements with one instrument
• Ultra-fast testing speeds: 1.5 ms (1 kHz), 0.5 ms (100 kHz)
• High accuracy: ±0.08% basic accuracy for Z parameter
• Ideal for low-ESR measurement of functional polymer capacitors
• Suitable for resonance testing of piezoelectric elements
• Accurate DCR and L-Q testing of inductors, coils, and transformers

The Hioki IM7580A is a compact, high-speed impedance analyzer for 1 MHz to 300 MHz testing, ideal for both production and R&D. It works seamlessly with the IM9201 SMD fixture for reliable component testing.

Key Features:

• 1 MHz to 300 MHz frequency range
• 0.5 ms test speed
• ±0.72% basic accuracy
• Compact half-rack size with palm-sized test head
• Reliable contact check functions
• Frequency, level, and time sweeps in Analyzer Mode
• RF I-V method for precise measurement

The Hioki IM7581 is a compact, high-speed impedance analyzer designed for accurate testing from 100 kHz to 300 MHz. It’s ideal for both production and development environments.

Key Features:

• 100 kHz to 300 MHz frequency range
• 0.5 ms fastest test speed
• ±0.72% basic accuracy
• Compact half-rack size, palm-sized test head
• Reliable contact check via DCR, Hi-Z reject, or waveform judgment
• Supports frequency, level, and time sweeps in Analyzer Mode
• Uses RF I-V method for precise measurement

The Hioki Impedance Analyzer IM7587 3 GHz provides precision, speed, and versatility for impedance measurements from 1 MHz to 3 GHz, ideal for both R&D and mass production applications in electronic component testing.

Key Features:

• Frequency range: 1 MHz to 3 GHz
• Test speed: 0.5 ms
• Measurement variability: 0.07%
• Basic accuracy: ±0.65% reading
• RF I-V measurement technique
• Compact half-rack design with palm-sized test head
• Robust contact check capabilities
• Analyzer mode: frequency and level sweeps, time interval measurements

Experience precision RF signal analysis on the go with this lightweight, handheld analyzer designed for both lab and field use.

Key Features:

• Frequency range: 1MHz to 1.3GHz (PSA1303) or 2.7GHz (PSA2703)
• RBW: 300Hz to 10MHz
• -115dBm typical noise floor
• Dual markers with absolute/difference values
• AM/FM demodulation in zero span
• Auto-find & smart marker peak tracking
• USB for waveform saving and PC connection
• Live, View, and Reference trace modes
• 6-hour lithium-ion battery operation
• Weighs just 0.58 kg
• Optional U01 Upgrade: Limit lines, data logging, triggering, compensation tables

High-performance, battery-powered spectrum analyzers ideal for RF engineers and field use.

Key Features:

• Frequency range: 10MHz to 3.6GHz or 6.0GHz
• -120dBm typical noise floor
• Resolution bandwidths from 300Hz to 10MHz
• AM/FM audio demodulation with zero span
• Live, View & Reference traces with markers
• Smart marker tracking with peak detection
• USB data logging & real-time PC view
• Compact, lightweight (0.56 kg) with >3hr battery
• Optional U02 features: limit lines, OBW, ACPR, AM/FM waveform demodulation

The Teledyne T3SA Series Spectrum Analyzers deliver high-performance signal analysis from 9 kHz to 3.2 GHz in a compact, easy-to-use design. Ideal for R&D, education, production, and pre-compliance testing, it features a large touchscreen and advanced digital IF technology.

Key Features:

• All Digital IF technology10.1”
• WVGA (1024 x 600) touchscreen display
• Frequency range from 9 kHz to 3.2 GHz
• -161 dBm/Hz displayed average noise level (typical)
• -98 dBc/Hz @ 10 kHz offset phase noise (typical)
• Total amplitude accuracy < 0.7 dB
• 1 Hz minimum resolution bandwidth (RBW)
• Built-in preamplifier for improved sensitivity

Typical Applications

● Research Laboratory
● Development Laboratory
● Repair and Maintenance
● Calibration Laboratory
● Automatic Production Test
● General bench-top use

The T3VNA Series from Teledyne Test Tools is a powerful, compact solution for engineers who demand precision and versatility in RF and spectrum analysis.

Key Features:

• Vector Network Analysis from 10 MHz to 3.2 GHz
• Spectrum Analysis from 9 kHz to 3.2 GHz
• All-digital IF technology for clean signal processing
• Built-in tracking generator (up to 1.5 GHz)
• Advanced features like Distance-to-Fault, OBW, ACPR
• -156 dBm/Hz typical displayed average noise level
• -98 dBc/Hz @ 10 kHz offset phase noise
• 1 Hz minimum RBW for high-resolution measurements
• 10.1″ WVGA display for smooth operation
• High accuracy with <1.2 dB amplitude error

The EME Guard Plus is a lightweight and robust personal protection monitor designed to ensure the safety of workers operating near electromagnetic field (EMF) emitters such as antennas, radars, and base stations. With a frequency range of 1 MHz to 40 GHz, this device continuously monitors and records EMF exposure levels while providing immediate audio, visual, and vibrating alerts when exposure exceeds predefined safety thresholds. Customizable alarm settings and a triaxial isotropic probe ensure accurate and reliable measurements.

The EME Guard XS Radar is a state-of-the-art RF safety monitor, specifically designed for workers operating near radar transmitters and antennas. With its isotropic tri-axis E-field sensors, this compact device provides continuous EMF monitoring over a frequency range of 1 MHz to 40 GHz, including short pulsed signal detection. Equipped with audio and visual alarms, it alerts users instantly when EMF exposure exceeds predefined safety thresholds, creating a safer working environment for military, aviation, and telecom personnel.

Solutions For:

•  Accurate measurement with tri-axis sensors
• Instant audio and visual alarm
• Robust, reliable and user-friendly
• Covers 5G / 6G bands, measuring up to 71 GHz

User profile:

• Persons working near antennas including installation and maintenance workers, broadcast, PMR and mobile phone operators or regulatory body employees

Measurement capabilities:

• Continuous monitoring of Electromagnetic Field levels with isotropic tri-axis E-field sensors
• EMF Level indicated by a LED color scale
• Audio and visual alarms triggered when EMF exceeds the reference level

The Hioki PW8001 High-Precision Power Analyzer sets the benchmark for precision power analysis, offering unmatched accuracy and flexibility for evaluating motor and inverter efficiency. Supporting DC and frequencies from 0.1 Hz to 5 MHz, it features an 8-channel measurement capacity, enabling simultaneous analysis of complex systems like EV drivetrains, renewable energy sources, and high-efficiency SiC/GaN semiconductors.

Equipped with advanced features such as automatic phase correction, intuitive Power Spectrum Analysis (PSA), and CAN/CAN FD integration, the PW8001 excels in capturing high-speed switching power fluctuations and harmonics. Its compatibility with high-voltage systems (up to 1500 V) and seamless connectivity with industry-standard software like LabVIEW and MATLAB ensure it meets diverse testing needs. With its robust design, real-time waveform visualization, and comprehensive motor analysis functions, the PW8001 is the ultimate tool for power conversion efficiency analysis.

• S-parameters DC to 40 GHz, single-ended and mixed-mode
• Impedance Profile with <1 mm resolution, differential and common-mode
• Internal, automatic OSLT calibration
• USB-connected, small, lightweight
• Flexible display of the measurements
• Remove effects from fixtures, connectors and cables
• Emulate eye diagrams with CTLE, DFE and FFE equalization
• Advanced jitter analysis