1 800 665 7301 | info@tmetrix.com

  • A high-performance analyzer designed for R&D applications involving electrochemical components, materials, batteries, and EDLCs. It enables precise impedance measurements essential for advanced evaluation and development.

    Key Features:

    • Wide frequency range: 1 mHz to 200 kHz for detailed ion and solution behavior analysis
    • Dual function: High-speed continuous LCR and sweep measurements with one device
    • Battery analysis: Measures internal impedance under no-load conditions
    • Ultra-fast sweep: Perform measurements in as little as 2 ms
    • High accuracy: ±0.05% basic precision for reliable R&D and testing
    • Advanced analysis: Supports Cole-Cole plots and equivalent-circuit modeling for electrochemical studies
  • Teledyne Test Tools Digital Power Meters provide reliable, high-precision AC and DC power measurements in a compact design. Ideal for R&D, QA, and compliance testing.

    Key Features:

    • Bandwidth: DC, 0.1 Hz to 100 kHz
    • High-resolution 4″ and 5″ TFT LCD displays
    • 19 power measurement parameters
    • 16-bit ADC and 300 kHz sampling rate (T3PM1100)
    • Waveform, harmonic, and integration functions
    • External current sensor input (T3PM1100)
    • Supports IEC 62301 and IEC 61000-4-7 standards
    • Interfaces: USB, LAN, RS-232C
    • Front/rear terminal inputs for flexible testing

     

  • An advanced firmware upgrade for the IM3570 that enables quick and accurate equivalent circuit analysis, ideal for in-depth component evaluation and quality control.

    Key Features:

    • Automatically selects the optimal equivalent circuit model from five typical options
    • Minimizes discrepancies between measured and ideal frequency characteristics
    • Determines acceptance/rejection of L, C, and R elements with precision
    • Evaluates resonance sharpness (mechanical quality coefficient)
    • Enables detailed analysis of piezoelectric elements and inductors through resonance
  • The Hioki IM7580A is a compact, high-speed impedance analyzer for 1 MHz to 300 MHz testing, ideal for both production and R&D. It works seamlessly with the IM9201 SMD fixture for reliable component testing.

    Key Features:

    • 1 MHz to 300 MHz frequency range
    • 0.5 ms test speed
    • ±0.72% basic accuracy
    • Compact half-rack size with palm-sized test head
    • Reliable contact check functions
    • Frequency, level, and time sweeps in Analyzer Mode
    • RF I-V method for precise measurement
  • The Hioki IM7581 is a compact, high-speed impedance analyzer designed for accurate testing from 100 kHz to 300 MHz. It’s ideal for both production and development environments.

    Key Features:

    • 100 kHz to 300 MHz frequency range
    • 0.5 ms fastest test speed
    • ±0.72% basic accuracy
    • Compact half-rack size, palm-sized test head
    • Reliable contact check via DCR, Hi-Z reject, or waveform judgment
    • Supports frequency, level, and time sweeps in Analyzer Mode
    • Uses RF I-V method for precise measurement
  • The Hioki Impedance Analyzer IM7587 3 GHz provides precision, speed, and versatility for impedance measurements from 1 MHz to 3 GHz, ideal for both R&D and mass production applications in electronic component testing.

    Key Features:

    • Frequency range: 1 MHz to 3 GHz
    • Test speed: 0.5 ms
    • Measurement variability: 0.07%
    • Basic accuracy: ±0.65% reading
    • RF I-V measurement technique
    • Compact half-rack design with palm-sized test head
    • Robust contact check capabilities
    • Analyzer mode: frequency and level sweeps, time interval measurements
  • Teledyne Test Tools LCR Meters offer precision testing in a compact form, perfect for R&D labs and production lines.

    Key Features:

    • 3.5” high-resolution color LCD display
    • Test frequency up to 300 kHz with continuous output
    • 0.05% basic measurement accuracy
    • Spot or full frequency range with OPEN/SHORT correction
    • Automatic Level Control (ALC) for consistent voltage on components like MLCCs
    • Measure up to 4 parameters simultaneously
    • DCR measurement & built-in ±2.5 V DC bias
    • PASS/FAIL indicator and 10-bin sorting function
    • List measurement for automated test sweeps (up to 10 points)
    • Interfaces: RS-232C, USB, handler, and USB storage
    • Compact 2U, 1/2 rack size for automated test setups
  • The Hioki MR6000 Memory HiCorder sets a new benchmark in waveform recording, combining cutting-edge technology, intuitive design, and world-class performance. Built from the ground up, it’s engineered to tackle both current and future measurement challenges with ease and precision.

    Key Features:

    • Large, intuitive touch panel for efficient and user-friendly operation
    • Simultaneous multi-channel isolation measurement at up to 200 MS/s (with High Speed Analog Unit U8976)
    • Significantly faster data saving for a seamless experience
    • Real-time data saving without interrupting ongoing measurements
  • The Hioki Rack-mounted Multi-channel System Recorder (MR8741/MR8740) is a powerful, high-speed, single-device solution for waveform recording and generation. Ideal for test systems, it offers high-resolution, isolated multi-channel measurements with fast sampling capabilities.

    Key Features:

    • Integrated waveform recording and generation in one device
    • Equipped with DVM Unit MR8990 for high-accuracy 24-bit resolution measurements
    • Supports up to 16 channels (MR8741) for multi-channel testing
    • Isolated input between channels and from input to chassis (up to 300 V AC/DC)
    • High-speed sampling up to 20 MS/s
    • Compact rack-mountable design (4U height, under 180 mm depth)
    • Monitor display and setting access via DVI-D and mouse
    • Enables remote measurement and control via LAN
    • Browser-based screen monitoring or advanced control via Hioki 9333 LAN Communicator
  • The Hioki Memory Recorder is a high-speed, fully-isolated data acquisition system designed for precise and simultaneous measurement of multiple analog and logic signals. Ideal for testing, simulation, and system diagnostics, it combines waveform generation and recording in one powerful unit.

    Key Features:

    • Generate and record waveforms using a single device
    • Simulate issues by outputting previously recorded problematic waveforms to test devices
    • Supports 32 analog + 32 logic channels, expandable to 28 analog + 64 logic channels
    • High-speed sampling up to 20 MS/s with fully isolated inputs
    • Ensures safe measurement with complete analog input isolation
    • Equipped with a large-capacity 512M-word memory
    • Simultaneously measures high voltage and ultra-low voltage system signals

     

  • T3DMM Series – Digital Multimeters deliver precision, speed, and display-rich features, ideal for professional labs, R&D, and production testing.

    Key Features:

    • Available in 4.5-digit (60,000 counts) and 6.5-digit (2,200,000 counts) models
    • True RMS AC voltage and current measurement
    • 4.3” TFT-LCD with 480×272 resolution
    • Multiple display modes: Number, Histogram, Trend Chart, Bar Meter, Statistics
    • Advanced math functions: Max, Min, Avg, Std Dev, dBm/dB, Relative, Pass/Fail
    • Supports remote operation via USB, LAN, SCPI commands
    • Built-in cold terminal thermocouple compensation
    • Wide range of measurements: Voltage, Current, Resistance, Capacitance, Frequency, Period, Temperature
    • Internal 1GB storage and USB host for external data access
    • User-friendly softkey interface and built-in help system
  • Teledyne Test Tools T3DAQ1-16 is a powerful 16-channel Data Acquisition Unit, perfect for R&D and production testing environments.

    Key Features:

    • 16-channel input (12 multi-purpose + 4 current)
    • Built on a 6½ digit digital multimeter platform
    • Wide range of electrical measurements: voltage, current, resistance, capacitance, frequency
    • True-RMS accuracy for AC voltage and current
    • Large 4.3″ TFT LCD with dual-display views
    • Display modes: Histogram, Trend, Bar Graph, Statistics, or Number
    • USB Host, USB Device, and LAN connectivity
    • Cold terminal thermocouple compensation
    • Softkey interface for intuitive navigation
  • High-Precision Current Measurement with BNC Connectivity

    • Precision Current Sensing: ±1% accuracy ensures reliable real-time current monitoring.
    • BNC Connector for Seamless Connectivity: Works with oscilloscopes, ADCs, spectrum analyzers, and power analyzers.
    • Clamp-On Design for Non-Intrusive Measurement: Safely monitor live current flow without circuit disruption.
    • 50 Ohm Termination Compatible: Output reduces by half when using a 50Ω termination.
    • High-Voltage Safety Considerations: Conductive case requires adequate insulation for user safety.

     

    • High Accuracy & Precision – Achieves ±30 ηA accuracy on multi-current range channels, ensuring reliable and consistent results.
    • Scalable Configurations – Choose from 1 to 16 channels across three series configurations, providing flexibility to expand as testing needs grow.
    • Compact & Space-Efficient Design – Desktop form factor saves space while maintaining full testing capabilities.
    • Comprehensive Data Collection – Log current, voltage, time, temperature, and other critical parameters with high-speed data acquisition.
    • Versatile Applications – Ideal for cell and battery testing, fuel cell testing, super-capacitor testing, thermal battery testing, qualification testing, and more.
    • Turn-Key System – Pre-configured software and hardware bundles ensure quick deployment and easy setup.
    • Advanced Software Integration – Seamlessly integrates with Maccor’s proprietary software for automated testing, data analysis, and reporting.
    • Safety & Reliability – Designed with built-in safety features to protect both users and equipment.
    • High-Speed Data Logging – Collects high-resolution data for in-depth performance analysis and characterization.
    • Multiple Test Modes & Sequences – Supports constant current, power, resistance, pulse, and custom waveforms for comprehensive testing scenarios.

     

  • The Maccor Cell, Battery, and Module Test Systems are perfect for:

    • Battery and Cell Testing
    • Module and Pack Testing
    • Fuel Cell & Super-Capacitor Testing
    • Research & Development
    • Quality Control & Manufacturing

     

    • Electrical energy is returned to the AC grid during discharge
    • 100% duty cycle standard – No system power limit, test channel rated for continuous operation at full power, allows use in testing very high power storage batteries and EV systems
    • Drive Cycle Simulation – Waveforms can be imported into the test procedure to increase test efficiency and reduce potential operator error
    • Local emergency cut-off switch, automatic shutdown on loss of AC power, reverse voltage protection, internal circuit breakers – Provides a high level of safety
    • Automatic scaling of data in W/kg or C-rate for drive cycle simulation programs and other test procedures – Reduces operator workload
    • Real-time data and graphics – Allows battery performance to be visually monitored at any time as the test progresses