Products

Aetec 7794 High Current Industrial Amplifier

Key Features:

• Up to 200 Ap / 100 Vp; DC to 150 kHz bandwidth
• Stable with resistive, inductive, or capacitive loads
• Controlled-voltage or controlled-current operation
• Switchable rail supply for optimized load impedance
• 60A continuous output at 13.8V DC
• ±95V DC and >35 V/µs slew rate
• Four-quadrant operation: sourcing and sinking
• Extensive protection against overvoltage, overcurrent, overtemperature
• Rack-mountable chassis with LCD fault diagnostics

AETechron 7796 Amplifier – High-Current, Low-Impedance Industrial Power
Ideal for precision testing, EMC simulations, and MRI systems.

Key Features:

• Delivers over 200 Ap peak current, up to ±180V
• DC to 100 kHz bandwidth for versatile signal reproduction
• Four-quadrant operation (source/sink modes)
• Operates in both voltage and current-controlled modes
• Handles in-rush currents up to 200A
• Field-configurable rail supply modes for load optimization
• Advanced protection against voltage, current, and thermal faults
• Stackable for higher voltage or current (up to 800 Ap)

Key Features:

• Wide frequency range: 9 kHz – 8 GHz
• High gain: 29 dB up to 6 GHz, 27 dB from 6 – 8 GHz
• Low noise figure: < 2.7 dB @ 1 GHz
• Compact aluminum housing (85 × 36 × 29 mm, 130 g)
• ESD-protected input for safe operation
• Operates on simple +12 V DC power supply
• Rugged and lightweight design for field and lab use

A modular, scalable, and intelligent matrix switching system designed for precision in multi-channel test applications.

Key Features:

• Modular design with up to 4 plugin switch cards
• 6×32 channel matrix, up to 2A per channel
• Remote control via TCP/IP interface
• Integrated diagnostics & safety monitoring
• Compatible with LabView, Python, C++, CANoe, and more
• Auto-cooling with smart fan activation
• Rack-mountable 4HU chassis with high build quality
• Expandable switching lines with CU-600 matrix
• Unlimited waveform size with dual waveform output
• Protocol generation and oscilloscope waveform simulation

The complete turnkey solution for testing high-voltage transient emissions and immunity under ISO 7637-4 standards.

Key Features:

• Full ISO 7637-4 compliance
• Pulse A: Switching noise simulation (100 kHz–10 MHz)
• Pulse B: Low-frequency sinusoidal testing (3 kHz–300 kHz)
• 75W high-power RF amplifier for clean signal output
• Configurable burst generation (1–1000 cycles)
• Galvanically isolated digital I/O and EUT interlock
• Scalable and modular hardware for custom test setups
• Integrated overvoltage and transient protection
• WaveMaster software with graphical waveform creation
• Compatible with LabView, Python, C++, and more

The CAR AWG 6000 is a high-performance, 4-quadrant battery simulator designed for EMC testing on vehicle supply lines. This powerful unit delivers precise voltage variations up to ±70V and 200A, compliant with international automotive standards.

Key Features:

• 4-quadrant voltage/current amplifier
• Battery simulation up to ±70V and 200A
• Compliant with ISO 7637-2, LV 124, LV 148, and more
• Arbitrary waveform generation at 20MSa/s, 16kSa
• Bandwidth up to 1 MHz for small signals
• Simulates pulse 2b, pulse 4, crank profiles, and AC ripple
• Selectable output impedance: 0–200 mΩ
• Overvoltage and overcurrent protection
• Integrated impulse recording function (IRF)
• Remote control via CAR-Remote software and Ethernet

A powerful battery simulator designed for high-voltage automotive testing up to 1500V. Compact, efficient, and ISO 7637-4:2020 compliant.

Key Features:

• Output voltage up to 1500V DC
• Supports 30A at 500V, 10A at 1500V
• Constant power delivery of 15kW
• Slew rate up to 100V/µs for rapid rise time
• Remote PC control via CAR-Remote software
• Parallel stacking up to 10 units (100A total)
• Compliant with ISO 7637-2, ISO 7637-4, FMC1280
• Compact desktop design with built-in Ethernet
• Robust overvoltage and overcurrent protection

CDG 7000 Conducted Immunity Test System, 10 kHz – 400 MHz

Key Features:

• All-in-one IEC/EN 61000-4-6 immunity test system with RF signal generator, power amplifier, 3-channel RF voltmeter, and directional coupler.
• Frequency range from 10 kHz to 400 MHz with multiple amplifier versions (25 W, 75 W, 75 W/10k).
• Supports BCI tests (ISO 11452-4) and NAMUR standards.
• Advanced software HELIA 7 with EUT monitoring and automated reporting.
• Interfaces: USB, LAN, optional GPIB for flexible integration.
• Expandable with external amplifiers and configurable digital I/O.
• Compact, robust 19″ desktop housing with 3-year warranty.

The CIS-25 Test Kit by AE Techron is an all-in-one solution for aviation conducted and induced susceptibility testing. Designed to meet rigorous standards like DO-160 Sections 16, 18, and 19, this kit includes everything needed to perform accurate, repeatable EMC tests with minimal setup.

Key Features:

• Meets Multiple Standards: DO-160 Sections 16 (up to 24VDC), 18, 19, MIL STD 461, Airbus ABD0100.1.8
• Complete Test Kit: Includes DSR 100-25 power system, three coupling transformers, and chattering relay
• 4x Power Surge Capability: Ideal for in-rush testing (up to 200 ms)
• Built-In Standards Library: 3110A library for additional EMC tests
• Expert Guidance Included: Two hours of consulting from EMC specialist Patrick G. Andre
• Secure & Durable: Comes with a lockable storage cabinet and all necessary accessories

The DAM 6.0-P Dual Antenna Mast is a high-precision, dual-antenna mast designed for accurate EMC measurements in magnetic absorption chambers.

Key Features:

• Adjustable height from 1.0 m to 6.0 m with electric stepper motor
• Pneumatic polarization change 0° to 90° in approx. 3 seconds
• Dual antenna support with max. load 20 kg (balanced)
• Rotating antenna bars to eliminate elevation errors
• Robust base: 0.95 m x 0.73 m
• Non-metallic construction (plastic and reinforced fiberglass)
• Remote control via LAN (TCP/IP) with FCU3.0 or NCD Controller
• Suitable for EMC testing labs, automotive, industrial, and telecom setups

Reliable digital transmission system for analog audio and video signals with multiple configuration options for EMC testing and monitoring.

Key Features:

• Transmits analog audio and video signals digitally over fiber optics
• Supports both unidirectional and bidirectional communication
• Available in multiple configurations: audio (stereo), video (NTSC/PAL), or combined
• Ideal for EMC testing, acoustic monitoring, and immunity test surveillance
• Integrated microphone and external input/output support in intercom models
• Suitable for automotive, military, aerospace, and RF industries
• Compliant with MIL-STD-461 standards

The Dips Interrupts Test System is a turnkey EMC solution for immunity testing across multiple IEC/EN 61000-4 standards. Available in 30kVA (43A) and 50kVA (75A) versions, this system is ideal for grid simulation, compliance testing, and R&D validation.

Key Features:

• Fully compliant with IEC/EN 61000-4-11/-13/-14/-27/-28/-34
• Fast switching: <5 µs voltage transition time
• Regenerative 4-quadrant AC grid simulator
• TC.VSE Voltage Slope Enhancer with 1000 A peak current
• Power range from 30 kVA up to 2000+ kVA
• User-friendly ACSControl software with test libraries
• Graphical interface for waveform preview and reporting
• Applications include EMC, inverter, anti-islanding, and medical testing
• Compact rack-mounted design with global certifications (CE, UKCA, RoHS)

The DSR 400 Series Test System is a compact, high-performance simulator for rigorous AC and DC immunity testing. Built for DO 160 and MIL STD 704 compliance, it integrates a powerful waveform generator, cutting-edge power technology, and a vast standards library—making it an ideal solution for demanding EMC test labs.

Key Features:

• Complete Test Solution for DO 160 Sec. 16 and MIL STD 704
• Built-In Standards Library with 3,400+ automotive and aviation test routines
• 4-Quadrant Operation: Sources and sinks current for complex test needs
• High Surge Capability: Delivers 5x rated power for 200 ms
• Fast Rise Time: Less than 30 µs for real-time performance
• Modular Output: 80A or 160A continuous current options available
• Multiple Waveform Options: Includes sine, ripple, triangle, sawtooth, square, and DC
• Remote Control Ready: LAN and GPIO integration for larger systems
• Easy-to-Use Interface: Pre-configured or user-custom test sequences

The DYN 8WD I-30t Dynamometer integrated into TT 16.0-30t Turntable is a high-capacity vehicle testing solution designed for EMC-compliant measurement and simulation.

Key Features:

• Load capacity: 30,000 kg with adjustable axle configuration
• Maximum dynamometer speed: 120 km/h
• Turntable diameter: 16.0 m, rotational speed 0.1–0.5 rpm
• Adjustable track width: 900 mm – 2700 mm
• Turntable height: 2800 mm, stainless steel cover plate
• Servo motor-driven turntable with bevel gear for smooth rotation
• Integrated emergency stop and safety switches
• Software-controlled with Maturo DynSoft, including cycle simulation, speed, torque, and force monitoring
• EMC compliant: emissions typically 10 dB under CISPR 12 and CISPR 25 limits
• Supports advanced vehicle test cycles, ABS/ESP testing, uphill/downhill simulation, and tractive force control

EMC001330SE | 10 kHz – 3 GHz | 30 dB Gain | Low Noise Preamplifier

Key Features:

• Wide frequency range: 10 kHz to 3 GHz
• High gain: 30 dB minimum with ±1.5 dB flatness
• Low noise figure: ≤ 5 dB for precise EMI measurements
• Ideal for compensating long cable loss
• High linearity and dynamic range
• Unconditionally stable, reliable performance
• Compact, portable, and robust design
• Compatible with major EMI test standards (CISPR, MIL-STD, ANSI)
• 110–240V AC universal power support
• Includes AC to DC inverter and N-type connectors

EMC03640A Low Noise Preamplifier – 30 MHz to 6 GHz

Key Features:

• Wide frequency range: 30 MHz to 6 GHz
• High gain: 40 dB minimum with ±2.5 dB flatness
• Low noise figure: ≤ 2.5 dB
• High EMI performance with excellent linearity
• Compensates for long cable loss in EMI measurements
• Improves system noise floor flatness
• Unconditionally stable with high dynamic range
• State-of-the-art technology for compliance testing
• Meets major EMI/EMC standards (ANSI, CISPR, MIL-STD)
• Compact and robust design with AC mains power input