Products

Aetec 7794 High Current Industrial Amplifier

Key Features:

• Up to 200 Ap / 100 Vp; DC to 150 kHz bandwidth
• Stable with resistive, inductive, or capacitive loads
• Controlled-voltage or controlled-current operation
• Switchable rail supply for optimized load impedance
• 60A continuous output at 13.8V DC
• ±95V DC and >35 V/µs slew rate
• Four-quadrant operation: sourcing and sinking
• Extensive protection against overvoltage, overcurrent, overtemperature
• Rack-mountable chassis with LCD fault diagnostics

AETechron 7796 Amplifier – High-Current, Low-Impedance Industrial Power
Ideal for precision testing, EMC simulations, and MRI systems.

Key Features:

• Delivers over 200 Ap peak current, up to ±180V
• DC to 100 kHz bandwidth for versatile signal reproduction
• Four-quadrant operation (source/sink modes)
• Operates in both voltage and current-controlled modes
• Handles in-rush currents up to 200A
• Field-configurable rail supply modes for load optimization
• Advanced protection against voltage, current, and thermal faults
• Stackable for higher voltage or current (up to 800 Ap)

Key Features:

• Wide frequency range: 9 kHz – 8 GHz
• High gain: 29 dB up to 6 GHz, 27 dB from 6 – 8 GHz
• Low noise figure: < 2.7 dB @ 1 GHz
• Compact aluminum housing (85 × 36 × 29 mm, 130 g)
• ESD-protected input for safe operation
• Operates on simple +12 V DC power supply
• Rugged and lightweight design for field and lab use

A modular, scalable, and intelligent matrix switching system designed for precision in multi-channel test applications.

Key Features:

• Modular design with up to 4 plugin switch cards
• 6×32 channel matrix, up to 2A per channel
• Remote control via TCP/IP interface
• Integrated diagnostics & safety monitoring
• Compatible with LabView, Python, C++, CANoe, and more
• Auto-cooling with smart fan activation
• Rack-mountable 4HU chassis with high build quality
• Expandable switching lines with CU-600 matrix
• Unlimited waveform size with dual waveform output
• Protocol generation and oscilloscope waveform simulation

The complete turnkey solution for testing high-voltage transient emissions and immunity under ISO 7637-4 standards.

Key Features:

• Full ISO 7637-4 compliance
• Pulse A: Switching noise simulation (100 kHz–10 MHz)
• Pulse B: Low-frequency sinusoidal testing (3 kHz–300 kHz)
• 75W high-power RF amplifier for clean signal output
• Configurable burst generation (1–1000 cycles)
• Galvanically isolated digital I/O and EUT interlock
• Scalable and modular hardware for custom test setups
• Integrated overvoltage and transient protection
• WaveMaster software with graphical waveform creation
• Compatible with LabView, Python, C++, and more

The CAR AWG 6000 is a high-performance, 4-quadrant battery simulator designed for EMC testing on vehicle supply lines. This powerful unit delivers precise voltage variations up to ±70V and 200A, compliant with international automotive standards.

Key Features:

• 4-quadrant voltage/current amplifier
• Battery simulation up to ±70V and 200A
• Compliant with ISO 7637-2, LV 124, LV 148, and more
• Arbitrary waveform generation at 20MSa/s, 16kSa
• Bandwidth up to 1 MHz for small signals
• Simulates pulse 2b, pulse 4, crank profiles, and AC ripple
• Selectable output impedance: 0–200 mΩ
• Overvoltage and overcurrent protection
• Integrated impulse recording function (IRF)
• Remote control via CAR-Remote software and Ethernet

A powerful battery simulator designed for high-voltage automotive testing up to 1500V. Compact, efficient, and ISO 7637-4:2020 compliant.

Key Features:

• Output voltage up to 1500V DC
• Supports 30A at 500V, 10A at 1500V
• Constant power delivery of 15kW
• Slew rate up to 100V/µs for rapid rise time
• Remote PC control via CAR-Remote software
• Parallel stacking up to 10 units (100A total)
• Compliant with ISO 7637-2, ISO 7637-4, FMC1280
• Compact desktop design with built-in Ethernet
• Robust overvoltage and overcurrent protection

Cascade Autonomous DC delivers fully automated DC wafer probing with unmatched precision and efficiency powered by Contact Intelligence™.

Key Features:

• Autonomous DC wafer probing with hands-free 24/7 operation
• Contact Intelligence™ technology for dynamic probe correction and reliable pad placement
• High throughput with up to 4x faster flicker noise thermal testing on pads as small as 30 µm
• Unattended operation for overnight or weekend testing without user intervention
• Automatic probe alignment compensating for thermal drift to reduce soak time
• Flexible probe layouts supporting single DUT and multi-DUT configurations
• Ease of use – start testing with just one button, ideal for operators at all levels

Cascade Autonomous RF delivers fully automated RF and mm-wave wafer probing with Contact Intelligence™ for unmatched accuracy and efficiency.

Key Features:

• Autonomous RF wafer probing with hands-free 24/7 operation
• Contact Intelligence™ for on-the-fly probe correction and pad placement
• Automatic calibration up to 500 GHz with WinCal XE software
• Calibration drift monitoring with auto re-calibration when needed
• Reduced soak time through dynamic probe re-alignment across temperatures
• Unattended operation for continuous overnight and weekend testing
• Supports 200 mm and 300 mm probe stations including CM300xi, SUMMIT200, Summit 12000, and Elite 300
• Simplified one-button operation, suitable for operators at all levels

Cascade Autonomous RF delivers fully automated RF and mm-wave wafer probing with Contact Intelligence™ for unmatched accuracy and efficiency.

Key Features:

• Autonomous RF wafer probing with hands-free 24/7 operation
• Contact Intelligence™ for on-the-fly probe correction and pad placement
• Automatic calibration up to 500 GHz with WinCal XE software
• Calibration drift monitoring with auto re-calibration when needed
• Reduced soak time through dynamic probe re-alignment across temperatures
• Unattended operation for continuous overnight and weekend testing
• Supports 200 mm and 300 mm probe stations including CM300xi, SUMMIT200, Summit 12000, and Elite 300
• Simplified one-button operation, suitable for operators at all levels

Cascade Autonomous Silicon Photonics delivers fully automated wafer and die-level photonics probing with Contact Intelligence™ for unmatched accuracy.

Key Features:

• Flexible vertical and edge coupling with single fibers or fiber arrays
• OptoVue™ technology for real-time in-situ calibrations
• Exclusive TopHat environment for dark, frost-free thermal testing (-40°C to +125°C)
• Sub-micron placement accuracy with Z displacement sensing
• Collision avoidance technology for safe fiber alignment
• SiPh-Tools software for automated alignment, calibration, and data management
• Partnership with Keysight and PI for seamless instrumentation and precision positioning
• Available on CM300xi-SiPh and SUMMIT200 probe stations

Cascade CM300xi – 300 mm Semi-/Fully-Automated Probe System

Key Features:

• Supports DC, AC, RF/microwave, WLR, FA, and design debug applications
• Wide thermal range from -60°C to +300°C with IceShield or TopHat compatibility
• Reliable, repeatable probe contact in a moisture-free, EMI-shielded environment
• Contact Intelligence™ technology for autonomous alignment and accurate measurements
• Modular design with upgrade paths for semi- or fully-automated configurations
• Handles up to 50 wafers with SEMI-standard cassette automation
• Fast transition times with MicroVac™ and FemtoGuard™ low-noise technologies
• Intuitive Velox software and Velox Dash™ touchscreen interface for simplified operation

Engineered for precision and safety, the EPS150TESLA delivers accurate on-wafer power device characterization up to 3,000 V and 100 A, making it a trusted choice for high-voltage and high-current testing.

Key Features:

• On-wafer power device characterization up to 3,000 V (triaxial) / 10,000 V (optional coaxial).
• High-current probing up to 100 A with ultra-low contact resistance.
• Triax chuck design for accurate low-leakage measurements.
• Shielded test environment with advanced grounding and arcing protection.
• Seamless integration with analyzers via SIGMA kit and optimized signal path.
• Safe probe tip exchange and thin-wafer handling capability.

Cascade EPS200MMW mmW and THz Probe System

Key Features:

• Complete mmW, THz, and load-pull measurement solution.
• Accurate probing up to 500 GHz with T-Wave Probes and VDI Extenders.
• SlimVue Microscope with 1 μm resolution and quick lens exchange.
• Resolves pads smaller than 50 μm with precision optics.
• Sigma Application Kits for broadband, load-pull, coax RF, and waveguide setups.
• Rock-solid mechanical design with submicron stage accuracy.
• Motorized positioner with ±1 μm separation repeatability.
• Stable and repeatable probe placement for THz frequencies.

Cascade EPS200RF 200 mm Manual Probe System

Key Features:

• Complete RF measurement package up to 67 GHz.
• Based on the PM8 platform for stability and flexibility.
• Supports Infinity, ACP, and |Z| probe technologies for different material types.
• High precision probing with RF chuck ±3 μm planarity.
• 500 μm platen stroke with ≤±1 μm accuracy for repeatable contact.
• Reliable probing for pads as small as 25 µm x 35 µm.
• Includes matching cables, substrates, and WinCal XE calibration software.
• Delivers accurate S-parameter measurements with automated calibration.

Key Features:

• 150 mm modular probe station with customizable base and starter kits.
• Flexible options for IV/CV, RF, mmWave, THz, high power, and failure analysis.
• Solid frame with built-in vibration isolation for measurement stability.
• Supports advanced microscopes, triax, coax, and RF chucks.
• Seamless integration with leading measurement instruments.
• Ergonomic design with quick pull-out stage for fast device handling.
• Re-configurable and upgradable to grow with future testing needs.