Products

High-performance dual-channel function and arbitrary waveform generator with up to 240 MHz output for advanced test and signal needs.

Key Features:

• Frequency range from 40 MHz to 240 MHz
• Dual independent or coupled full-performance channels
• Precise phase control: 0.001° resolution
• Arbitrary waveform support up to 800 MS/s
• Replay rates up to 80 MHz
• Wide range of built-in and user-defined waveforms
• Pulse generation up to 100 MHz, low jitter
• Internal/external modulation, sweep, gated, and burst modes
• USB, LAN (LXI compliant), and optional GPIB
• PC software for waveform generation and editing

Key Features:

• Wide temperature range from -65°C to +300°C
• Compatible with 150mm, 200mm, and 300mm wafer sizes
• Options for mechanical refrigeration, glycol/water, or air cooling
• Heating methods: ThermoElectric or Resistive, depending on model
• Retrofits available for existing probe stations
• Customizable surface plating: gold or nickel
• Supports advanced applications like low leakage probing (fA level) and high-voltage probing (up to 10kV)

ThermoSpot Systems – Benchtop Direct Contact Cooling and Heating Solution

The Temptronic® ThermoSpot® delivers high-performance temperature control for IC testing and high-Watt devices with unmatched cooling capacity.

Key Features:

• Reliable thermal cycling without thermoelectric modules
• Wide temperature range: -65°C to +175°C
• Cooling power: 40W at -40°C, 55W at -55°C, 120W at -40°C
• Fast transitions: <35 seconds from +25°C to -40°C
• Secure thermal contact with ThermoBridge™ design
• Touch-screen with data logging and programmable settings
• Multiple communication ports: Ethernet, USB, IEEE, RS232

ThermoSpot® Systems – Direct Contact Thermal Test Solutions

Key Features:

• Temperature range: -65°C to +175°C
• Cooling power up to 120W at -40°C
• Fast transition rate (<35 sec from +25°C to -40°C)
• Reliable thermal cycling without thermoelectric modules
• Flexible thermal probe with interchangeable ThermoBridge™
• Touchscreen controller with programmable profiles
• Connectivity options: Ethernet, USB, IEEE, RS232
• Easy, secure connection to in-circuit or socketed DUTs

Key Features:

• Single output up to 360W: Choose between 18V/20A or 35V/10A
• Mixed-mode regulation for high accuracy and low noise
• Fanless convection cooling for completely silent operation
• Bench or rack mountable, front and rear terminals
• OVP trip, high-resolution settings, and remote sense terminals
• P models offer USB, RS232, LAN interfaces (GPIB optional)
• Rotary, keypad, and step control for voltage and current
• Non-volatile memory for storing up to 25 user presets
• Seamless integration with Test Bridge software and automation systems

Key Features:

• Free-standing turntable designed for electromagnetic absorption chambers
• 0.3 m diameter with 50 kg load capacity
• Height: 190 mm, made of rigid PVC skin-foam sheets
• Rotating speed adjustable from 0.1 rpm to 2.5 rpm
• High positioning accuracy of ±0.5°
• Rotation angle: -200° to 400° with synchronous servo motor
• LAN (TCP/IP) control option via FCU3.0 or NCD Controller
• Central 50 mm opening for power supply insertion
• Interference suppression: 20 dB under DIN EN 55011:2018-05 class B
• Ideal for automotive, telecom, medical, and industrial EMC testing

The TT 1.0 PF Turn Table is a precision turntable designed for EMC and RF testing in anechoic and electromagnetic absorption chambers.

Key Features:

• Diameter: 1.0 m; height: 190 mm
• Load capacity up to 100 kg
• Free-standing design for chamber floor installation
• Adjustable rotation speed: 0.1–2.5 rpm
• Positioning accuracy: ±0.5°
• Rotating angle range: -200° to 400°
• Central 50 mm opening for power supply connections
• Controlled via LAN (TCP/IP) with FCU3.0 or NCD Controllers
• Durable PVC integral skin-foam cover plate
• Synchronous servo motor with toothed belt and worm gear drive

VRC Reverb Tent Chamber is a flexible, modular electromagnetic test facility designed for immunity and emission testing with high efficiency and portability.

Key Features:

• Flexible metallic fabric tent construction
• Wide frequency range (up to 18 GHz)
• Mechanical vibration walls (5–20 Hz) for uniform reverberation
• Faster test throughput compared to traditional methods
• Modular, customizable dimensions for large or small DUTs
• Compliant with IEC 61000-4-21 and MIL-STD-461 standards
• Easy to assemble, disassemble, and transport
• Optional accessories: antennas, filters, control rooms

Compact yet powerful, the WA301 extends the output of your function generator with clean, reliable amplification up to 30V peak-to-peak.

Key Features:

• 30V peak-to-peak output swing
• DC to 1MHz wide bandwidth
• High impedance input with 0dB to +20dB variable gain
• 50 Ohm and 600 Ohm outputs
• Switchable 20dB output attenuator
• Fully protected output for safe use
• Ideal for extending function generator output capability

The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields – including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price. IEC 60601-1-2 calling out IEC 61000-4-39 magnetic immunity for close proximity testing requirements can also now be met with the 10 kHz unit.

• Frequency Range:
  • 10 kHz – 30 MHz Conducted
  • 5 MHz – 1GHz Radiated
• Frequency step:
  • 10/500 kHz switchable CE
  • 5/10 MHz switchable RE
• Includes: Generator, antenna, charger, wood case

• 10 kHz – 3 GHz, 40dB Gain, 5dB N.F.
• Compensation for long cable loss for EMI Measurement
• Improve system noise floor flatness
• High EMI performance
• High linearity LNA for EMI measurement
• High dynamic range
• Unconditionally Stable
• State-of-the-Art Technology

The EME Guard Plus is a lightweight and robust personal protection monitor designed to ensure the safety of workers operating near electromagnetic field (EMF) emitters such as antennas, radars, and base stations. With a frequency range of 1 MHz to 40 GHz, this device continuously monitors and records EMF exposure levels while providing immediate audio, visual, and vibrating alerts when exposure exceeds predefined safety thresholds. Customizable alarm settings and a triaxial isotropic probe ensure accurate and reliable measurements.

The EME Guard XS Radar is a state-of-the-art RF safety monitor, specifically designed for workers operating near radar transmitters and antennas. With its isotropic tri-axis E-field sensors, this compact device provides continuous EMF monitoring over a frequency range of 1 MHz to 40 GHz, including short pulsed signal detection. Equipped with audio and visual alarms, it alerts users instantly when EMF exposure exceeds predefined safety thresholds, creating a safer working environment for military, aviation, and telecom personnel.

Solutions For:

•  Accurate measurement with tri-axis sensors
• Instant audio and visual alarm
• Robust, reliable and user-friendly
• Covers 5G / 6G bands, measuring up to 71 GHz

User profile:

• Persons working near antennas including installation and maintenance workers, broadcast, PMR and mobile phone operators or regulatory body employees

Measurement capabilities:

• Continuous monitoring of Electromagnetic Field levels with isotropic tri-axis E-field sensors
• EMF Level indicated by a LED color scale
• Audio and visual alarms triggered when EMF exceeds the reference level

• EMI Measurements:
  • FFT-based dual-channel receiver
  • According to CISPR16-1-1
  • Peak, Quasi-Peak, and Average Detectors
  • Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
  • The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)