Products

EMCview PC Software Pre-Compliance Testing

Key Features:

• Easy-to-use software for radiated and conducted emissions testing.
• Pre-configured project files for CISPR-xx (EN550xx) standards and automotive EMC standards.
• Built-in amplitude correction for cables, LISNs, TEM cells, antennas, amplifiers, and probes.
• Supports spectrum analyzers from Rigol, Siglent, and R&S (FPC/FPH series).
• Dual measurement runs with Average/Quasi-Peak or Peak/Quasi-Peak modes.
• Fast Quasi-Peak scan of critical frequencies for efficient troubleshooting.
• Configurable limit lines, margins, and correction files.
• Automatic test reports and versatile import/export functions.
• Ideal for in-house EMC testing, design validation, and cost reduction.

EMScanner: 150 kHz – 8 GHz High-Frequency EMC Desktop Scanner

Key Features:

• Wide frequency coverage from 150 kHz to 8 GHz
• 3.5 mm effective spatial resolution for precise diagnostics
• Real-time spectral and spatial scans with peak-hold and comparison features
• Reduces testing time by over 100x and design cycle times by up to 50%
• Supports emission, immunity, EMI shielding, and broadband noise testing
• Compact, lightweight, and designed for high-speed, high-density PCB projects
• EMViewer Software for advanced scan visualization, reporting, and analysis
• Compatible with leading spectrum analyzers, supporting multiple formats and overlays

EMScannerR: 150 kHz – 8 GHz, up to 0.06 mm Resolution EMC Desktop Scanner

Key Features:

• Frequency coverage from 150 kHz to 8 GHz for complete diagnostics
• Ultra-high spatial resolution down to 0.06 mm across 8 levels
• Real-time spectral and spatial scanning with peak-hold and comparison tools
• Supports JPEG overlays, Gerber RS274x, and HPGL formats
• Reduces testing time by 100x and design cycle times by up to 50%
• Identifies hot spots, current loops, and unintended radiators instantly
• Designed for high-speed, high-density PCB projects across multiple industries
• EMViewer Software with 3D views, live overlays, and advanced reporting

EMSCOPE-RX4, 9 kHz – 110 MHz, 4 Channel Receiver for 3 Phase

Key Features:

• Quad-channel receiver for complete EMI measurements up to 110 MHz
• FFT-based dual-channel receiver according to CISPR 16-1-1
• Peak, Quasi-Peak, and Average detectors
• Resolution bandwidth filters: 200 Hz, 9 kHz, 120 kHz (CISPR), 1 kHz, 10 kHz (MIL)
• Fastest receiver in the market with 6 simultaneous measurements
• Supports common- and differential-mode modal measurements
• Compact, lightweight design with integrated pre-amp and pulse limiter
• Software included with real-time results, waterfall function, and auto compliance reports

A versatile bench power supply series with mixed-mode regulation, ideal for lab or system environments.

Key Features:

• Single, dual, or triple outputs with up to 420W power
• Output ranges: 18V/10A, 20V/20A, 35V/5A, 42V/10A
• Dual model: 2×35V/4A or 150V/2A (combined)
• Triple model includes 1.5–5V/5A auxiliary output
• Independent 4-digit meters for each output
• Local or remote sensing with constant V or I modes
• Silent, fan-free operation for most models
• Compact, space-saving design
• RS232 or USB interfaces on select models

The FPP2.3-M Manual Field Probe Positioner is a precise manual height adjustment system for electromagnetic field probes, designed for uniform field calibration in EMC testing environments.

Key Features:

• Manual height adjustment: 0.2 – 2.3 m
• Maximum load capacity: 3 kg
• Total height: 2.5 m
• Fabricated from PVC and reinforced fiberglass, fully non-metallic
• Base dimensions: 0.5 m × 0.5 m with movable wheels
• Lightweight and portable: approx. 10 kg
• Compliant with EN61000-4-3 and IEC61000-4-3 standards
• Ideal for uniform field calibration and precise field probe positioning

The FPP2.3/1.5 M Field Probe Positioner is a high-precision, remote-controlled axial system designed for fast and automated electromagnetic field measurements.

Key Features:

• Remote-controlled horizontal movement for single-axis operation
• Moves 4 probes to 4 positions for rapid 16-point calibration
• Automates uniform field calibration (UFA) per EN61000-4-3 / IEC61000-4-3
• Load capacity: 3 kg
• Adjustable positioning speed (1–35 cm/s)
• High accuracy: ±0.5 cm
• Durable construction: plastic & reinforced fiberglass, minimal metal parts
• LAN (TCP/IP) interface for full remote operation
• Compatible with FCU 3.0 or NCD Controller

Compact, versatile, and efficient, the FX Series is ideal for test labs, R&D, and educational use.

Key Features:

• PowerFlex autoranging outputs (up to 105W per channel)
• Dual or triple output models (210W or 246W total)
• SELV compliant and high safety design
• Rotary, touch, and USB control options
• Low ripple noise (<2mV), high resolution (1mV/1mA)
• Voltage tracking and simultaneous V/I control
• Remote USB interface with SCPI protocol
• 25 user-defined memory presets
• Switchable remote sense & intelligent cooling
• Includes Test Bridge software for logging & automation

Gas Chillers are designed for precise and efficient cooling of nitrogen, argon, and clean dry air in demanding process applications. Built for reliability and flexibility, these systems deliver ultra-low temperatures with fast response times.

Key Features

• Cooling capability down to -95°C
• Supports nitrogen, argon, air, and clean dry air
• Open loop and closed loop configurations available
• Fast temperature transitions for process efficiency
• No LN2 or LCO2 required for operation
• Auto cascade and cryogenic cooling options
• Advanced control for consistent performance
• Designed for industrial and high precision applications
• Compliant with global industry standards

A turnkey solution for harmonics and flicker compliance, this system delivers powerful, efficient, and automated testing for today’s high-power demands.

Key Features:

• Fully compliant with IEC/EN 61000-3-2, -3-3, -3-11, and -3-12
• High-power testing up to 75 A and 50 kVA
• Regenerative AC power supply with energy recovery
• Programmable simulation: voltage, frequency, harmonics, interharmonics
• Precision impedance network for accurate flicker measurements
• Advanced power analyzer with harmonic and flicker metering
• Preloaded test sequences with automated software control
• Expandable to include dips, swells, and short interruptions

BOLAB ISO 21498 HV Test System & Ripple Generator sets the benchmark for advanced high-voltage ripple testing, ensuring full compliance with ISO 21498, LV123, VW 80300, and other major automotive standards. Its modular design, integrated amplifier system, and WaveMaster software deliver unmatched precision, flexibility, and control.

Key Features:

• High-voltage ripple testing compliant with ISO 21498, LV123, VW 80300, and more
• Ripple voltage up to 100 Vpp and current from 100A to 2000A+
• Frequency range: 10 Hz to 300+ kHz for wide testing capability
• Series amplifier integration for precise, distortion-free ripple injection
• WaveMaster software enables automated test sequences and dynamic control
• Modular, future-proof design adaptable to evolving EV standards

• Current measurement from insulated probing of conductor
• Suitable for observation and measurement of current in PCB tracks, component leads and ground planes
• Wide dynamic range of 10mA to 20A peak to peak
• Wide bandwidth of DC to 5MHz
• Low noise figure equivalent to <6mA rms at full B/W
• Safety rated to 300V Cat II (600V Cat 1)
• Suitable for connection to any oscilloscope
• High accuracy general purpose H-field probe
• Converts to ‘closed magnetic circuit’ current probe

The Aim-TTi LCR400 Precision LCR Meter delivers high-accuracy component testing in a compact, user-friendly design. With 0.1% basic accuracy and built-in comparator functions, it’s ideal for precision component measurement and quality control.

Key Features:

• 0.1% basic measurement accuracy for reliable results
• Automatic component recognition for ease of operation
• Dual 5-digit high-brightness displays for clear readings
• Built-in 4-terminal component fixture for stable connections
• Limits comparator with 8 Pass bins and 2 Fail bins
• Three selectable test frequencies with switchable bias
• RS232 standard interface for PC connectivity
• Optional SMD tweezers, Kelvin clips, and PC logging software

The Aim-TTi LD400 Series DC Electronic Load is a versatile and high-performance solution for testing DC power supplies, batteries, and converters. With precise control, multiple operating modes, and advanced transient testing, it ensures dependable and accurate performance for laboratory and production environments.

Key Features:

• Wide operating range: 0–80V and 0–80A
• 400W continuous and 600W short-term power dissipation
• Multiple modes: constant current, voltage, resistance, conductance, and power
• Operates at <1V for high-current testing up to 40A
• Built-in transient generator with variable slew rate
• High accuracy with fine-level setting resolution
• Variable drop-out voltage for battery discharge testing
• Graphical LCD with intuitive soft-key control
• Analog and TTL remote control functions
• USB, RS232, and LAN (LXI) interfaces; optional GPIB (LD400P)
• Front and rear input terminals for flexible connections

The Aim-TTi LDH400 Series DC Electronic Load offers a powerful and precise solution for direct testing of DC power sources, converters, and PFCs. Designed for high-voltage applications, it combines advanced features, intuitive control, and reliable performance in a compact form factor.

Key Features:

• Wide voltage range: 10V to 500V and current up to 16A
• 400W continuous power dissipation at 28°C (360W at 40°C)
• Operates in constant current, resistance, conductance, and power modes
• High accuracy and resolution for precise level settings
• Built-in transient generator with adjustable slew rates
• Variable drop-out voltage ideal for battery and power testing
• Graphical LCD with easy soft-key interface
• Front and rear input terminals for flexible connectivity
• Remote control via USB, RS232, and LXI-compliant LAN
• Optional GPIB interface available
• Rated to CAT II (300V) safety standards

LN2 Cryogenic Chillers are compact and portable cooling systems designed for ultra-low temperature applications. Using liquid nitrogen, these chillers deliver rapid cooling, high capacity, and precise temperature control for demanding industrial processes.

Key Features

• Ultra-low temperature capability down to -100°C
• Cooling capacity up to 20kW at -90°C
• Rapid temperature transition rates for fast processing
• Compact and portable design with small footprint
• On-demand cooling with automatic LN2 control
• High temperature stability up to ±0.5°C
• Supports in-line and tank-based cooling systems
• Advanced control options for flow and pressure
• Suitable for a wide range of industrial applications