Products

EMSCOPE-RX4, 9 kHz – 110 MHz, 4 Channel Receiver for 3 Phase

Key Features:

• Quad-channel receiver for complete EMI measurements up to 110 MHz
• FFT-based dual-channel receiver according to CISPR 16-1-1
• Peak, Quasi-Peak, and Average detectors
• Resolution bandwidth filters: 200 Hz, 9 kHz, 120 kHz (CISPR), 1 kHz, 10 kHz (MIL)
• Fastest receiver in the market with 6 simultaneous measurements
• Supports common- and differential-mode modal measurements
• Compact, lightweight design with integrated pre-amp and pulse limiter
• Software included with real-time results, waterfall function, and auto compliance reports

A versatile bench power supply series with mixed-mode regulation, ideal for lab or system environments.

Key Features:

• Single, dual, or triple outputs with up to 420W power
• Output ranges: 18V/10A, 20V/20A, 35V/5A, 42V/10A
• Dual model: 2×35V/4A or 150V/2A (combined)
• Triple model includes 1.5–5V/5A auxiliary output
• Independent 4-digit meters for each output
• Local or remote sensing with constant V or I modes
• Silent, fan-free operation for most models
• Compact, space-saving design
• RS232 or USB interfaces on select models

The FPP2.3-M Manual Field Probe Positioner is a precise manual height adjustment system for electromagnetic field probes, designed for uniform field calibration in EMC testing environments.

Key Features:

• Manual height adjustment: 0.2 – 2.3 m
• Maximum load capacity: 3 kg
• Total height: 2.5 m
• Fabricated from PVC and reinforced fiberglass, fully non-metallic
• Base dimensions: 0.5 m × 0.5 m with movable wheels
• Lightweight and portable: approx. 10 kg
• Compliant with EN61000-4-3 and IEC61000-4-3 standards
• Ideal for uniform field calibration and precise field probe positioning

The FPP2.3/1.5 M Field Probe Positioner is a high-precision, remote-controlled axial system designed for fast and automated electromagnetic field measurements.

Key Features:

• Remote-controlled horizontal movement for single-axis operation
• Moves 4 probes to 4 positions for rapid 16-point calibration
• Automates uniform field calibration (UFA) per EN61000-4-3 / IEC61000-4-3
• Load capacity: 3 kg
• Adjustable positioning speed (1–35 cm/s)
• High accuracy: ±0.5 cm
• Durable construction: plastic & reinforced fiberglass, minimal metal parts
• LAN (TCP/IP) interface for full remote operation
• Compatible with FCU 3.0 or NCD Controller

Compact, versatile, and efficient, the FX Series is ideal for test labs, R&D, and educational use.

Key Features:

• PowerFlex autoranging outputs (up to 105W per channel)
• Dual or triple output models (210W or 246W total)
• SELV compliant and high safety design
• Rotary, touch, and USB control options
• Low ripple noise (<2mV), high resolution (1mV/1mA)
• Voltage tracking and simultaneous V/I control
• Remote USB interface with SCPI protocol
• 25 user-defined memory presets
• Switchable remote sense & intelligent cooling
• Includes Test Bridge software for logging & automation

A turnkey solution for harmonics and flicker compliance, this system delivers powerful, efficient, and automated testing for today’s high-power demands.

Key Features:

• Fully compliant with IEC/EN 61000-3-2, -3-3, -3-11, and -3-12
• High-power testing up to 75 A and 50 kVA
• Regenerative AC power supply with energy recovery
• Programmable simulation: voltage, frequency, harmonics, interharmonics
• Precision impedance network for accurate flicker measurements
• Advanced power analyzer with harmonic and flicker metering
• Preloaded test sequences with automated software control
• Expandable to include dips, swells, and short interruptions

HDA125 High-Speed Digital Analyzer brings advanced logic analysis capabilities to your existing Teledyne LeCroy oscilloscopes. Compact, accurate, and versatile.

Key Features:

• 12.5 GS/s sample rate for high-speed digital capture
• Supports up to 18 digital channels
• Compatible with WaveMaster/SDA 8 Zi-B and LabMaster 10Zi-A oscilloscopes
• QuickLink Probe System for fast, low-impact signal access
• 3 GHz bandwidth and 80 ps timing accuracy
• Command bus decoding for in-depth DDR/LPDDR memory debugging
• Minimal signal loading with 110 kΩ, 0.12 pF tip impedance
• Cost-effective QuickLink solder-in tips simplify multi-point testing
• Ideal for mixed-signal, high-speed, and memory interface debugging

BOLAB ISO 21498 HV Test System & Ripple Generator sets the benchmark for advanced high-voltage ripple testing, ensuring full compliance with ISO 21498, LV123, VW 80300, and other major automotive standards. Its modular design, integrated amplifier system, and WaveMaster software deliver unmatched precision, flexibility, and control.

Key Features:

• High-voltage ripple testing compliant with ISO 21498, LV123, VW 80300, and more
• Ripple voltage up to 100 Vpp and current from 100A to 2000A+
• Frequency range: 10 Hz to 300+ kHz for wide testing capability
• Series amplifier integration for precise, distortion-free ripple injection
• WaveMaster software enables automated test sequences and dynamic control
• Modular, future-proof design adaptable to evolving EV standards

• Current measurement from insulated probing of conductor
• Suitable for observation and measurement of current in PCB tracks, component leads and ground planes
• Wide dynamic range of 10mA to 20A peak to peak
• Wide bandwidth of DC to 5MHz
• Low noise figure equivalent to <6mA rms at full B/W
• Safety rated to 300V Cat II (600V Cat 1)
• Suitable for connection to any oscilloscope
• High accuracy general purpose H-field probe
• Converts to ‘closed magnetic circuit’ current probe

Teledyne Test Tools LCR Meters offer precision testing in a compact form, perfect for R&D labs and production lines.

Key Features:

• 3.5” high-resolution color LCD display
• Test frequency up to 300 kHz with continuous output
• 0.05% basic measurement accuracy
• Spot or full frequency range with OPEN/SHORT correction
• Automatic Level Control (ALC) for consistent voltage on components like MLCCs
• Measure up to 4 parameters simultaneously
• DCR measurement & built-in ±2.5 V DC bias
• PASS/FAIL indicator and 10-bin sorting function
• List measurement for automated test sweeps (up to 10 points)
• Interfaces: RS-232C, USB, handler, and USB storage
• Compact 2U, 1/2 rack size for automated test setups

The MAS 1.0/1.5 – 35kg Manual Antenna Stand is a robust and versatile stand for precise antenna positioning in EMC testing environments.

Key Features:

• Adjustable height from 1.0 m to 1.5 m using hydraulic cylinder
• Manual polarization change from 0° to 90°
• Supports antennas up to 35 kg
• Manual tilt adjustment up to 30°
• Rotating antenna bar to eliminate elevation errors
• Stable base: 0.9 m x 1.57 m
• Suitable for EMC chambers, labs, and industrial setups

The MGA 1033 Magnetic Immunity Generator and Analyzer is a compact and versatile system designed for generating and measuring magnetic fields according to international EMC standards. With its integrated high-power amplifier and flexible configuration, it ensures precise and legally compliant testing for industries including automotive, avionics, military, and medical electronics.

Key Features:

• Frequency range: DC to 250 kHz
• Field strengths up to 1000 A/m (with Helmholtz coils)
• Integrated 800 W high-power amplifier
• Supports ISO 11452-8, EN 55103, DO-160, MIL-STD-461 and more
• Three independent modules: signal generator, power amplifier, spectrum analyzer
• Self-calibration and calibration modes with Helmholtz coils
• Fully automatic testing with optional triaxial coil
• Wide range of compatible accessories

Teledyne Test Tools Milli Ohm Meter offers high-precision low-resistance measurement with advanced drive modes, temperature compensation, and fast sampling.

Key Features:

• 50,000-count high-resolution display
• 3.5″ TFT LCD (320×240)
• 0.05% measurement accuracy
• 1 Amp test current with 0.1 μΩ resolution
• Fast 60 readings per second
• Four-wire measurement method
• Temperature compensation and delayed measurement
• 20-panel memory settings
• Dry circuit testing (T3MIL50X only)
• USB, RS-232C, and EXT I/O interfaces
• Multiple drive modes: DC+, DC-, Pulsed, PWM (T3MIL50X)

The industry’s highest-resolution portable TDR cable tester, the MOHR CT100 delivers unmatched accuracy for coaxial and twisted-pair cables in the field, lab, or production floor.

Key Features:

• Resolves connector details < 1 cm (8–10x sharper than competitors)
• Tests coaxial, twisted-pair, and multi-conductor cables
• Exceeds Tektronix® 1502C TDR specifications
• Accurate impedance and cable length measurement with 16-bit ADC
• Detects intermittent faults with up to 250,000 samples/sec
• Integrated LAN/WAN/Internet remote control with CT Viewer™ 2 software
• Lightweight, portable design with 4.3″ color LCD
• Used by the U.S. Navy as the Tektronix 1502 series replacement

MOL2000T Fiber Optic Link 80 Hz – 3.5 GHz with Gain and Sleep Feature delivers secure, high-performance analog signal transmission in demanding RF and EMC applications.

Key Features:

• Wide bandwidth: 80 Hz to 3.5 GHz
• Remote-controlled gain: -62.5 dB to +24 dB (0.5 dB steps)
• Automatic optical level control for stable performance
• High immunity to electric fields (up to 500 kV/m, MIL-STD 461 RS105)
• Built-in test pulse generator for link verification
• Long-distance transmission up to 1 km
• Compact & lightweight: 380 g per unit
• Battery-powered with 40-hour autonomy and sleep mode
• Flexible control with FibREmote software (PC & Android)
• Rugged RF and optical connectors for durability

Key Features:

• Wide bandwidth: DC to 25 MHz for accurate signal transmission
• Dual-channel design with two independent inputs
• High EMI immunity up to 500 kV/m (MIL-STD 461 RS105)
• Remote-selectable attenuation: 1:1, 10:1, 100:1
• Galvanic isolation for safe operation in high-voltage environments
• Long-distance optical transmission up to 1 km
• Battery-powered with 20+ hour autonomy and sleep mode
• Remote configuration via FibREmote software for PC & Android