Products

Compact, versatile, and efficient, the FX Series is ideal for test labs, R&D, and educational use.

Key Features:

• PowerFlex autoranging outputs (up to 105W per channel)
• Dual or triple output models (210W or 246W total)
• SELV compliant and high safety design
• Rotary, touch, and USB control options
• Low ripple noise (<2mV), high resolution (1mV/1mA)
• Voltage tracking and simultaneous V/I control
• Remote USB interface with SCPI protocol
• 25 user-defined memory presets
• Switchable remote sense & intelligent cooling
• Includes Test Bridge software for logging & automation

A turnkey solution for harmonics and flicker compliance, this system delivers powerful, efficient, and automated testing for today’s high-power demands.

Key Features:

• Fully compliant with IEC/EN 61000-3-2, -3-3, -3-11, and -3-12
• High-power testing up to 75 A and 50 kVA
• Regenerative AC power supply with energy recovery
• Programmable simulation: voltage, frequency, harmonics, interharmonics
• Precision impedance network for accurate flicker measurements
• Advanced power analyzer with harmonic and flicker metering
• Preloaded test sequences with automated software control
• Expandable to include dips, swells, and short interruptions

• Current measurement from insulated probing of conductor
• Suitable for observation and measurement of current in PCB tracks, component leads and ground planes
• Wide dynamic range of 10mA to 20A peak to peak
• Wide bandwidth of DC to 5MHz
• Low noise figure equivalent to <6mA rms at full B/W
• Safety rated to 300V Cat II (600V Cat 1)
• Suitable for connection to any oscilloscope
• High accuracy general purpose H-field probe
• Converts to ‘closed magnetic circuit’ current probe

A compact, high-performance power supply for automotive EMC and battery voltage simulation.

Key Features:

• Battery simulator for 12V, 24V, 42V, and 48V systems
• Output: 0–66V / 0–55A (max)
• Fast voltage rise time up to 100V/µs
• ISO 7637-2 and ISO 16750-2 compliant
• Remote control via CAR-Remote Software
• Impulse Recording Function (IRF) included
• Compact 19-inch desktop form (15 kg only)
• Overvoltage and thermal protection
• Slew rate: 10V/µs with fan cooling system
• Compatible with HILO CAR-SYS test systems

High-performance power simulator designed for advanced EMC and automotive voltage testing.

Key Features:

• Supports 12V, 24V, 42V, 48V, and 70V automotive systems
• Battery simulation with up to 220A current
• Fast voltage rise time up to 100V/µs
• ISO 7637-2 and ISO 16750-2 compliant
• Integrated Impulse Recording Function (IRF)
• Full remote control via CAR-Remote software
• Ethernet interface and built-in safety interlock
• Cooling via fans and heat sink for reliable operation
• Compact 19-inch rackmount desktop system (60 kg)
• Overvoltage and thermal protection included

Experience precision RF signal analysis on the go with this lightweight, handheld analyzer designed for both lab and field use.

Key Features:

• Frequency range: 1MHz to 1.3GHz (PSA1303) or 2.7GHz (PSA2703)
• RBW: 300Hz to 10MHz
• -115dBm typical noise floor
• Dual markers with absolute/difference values
• AM/FM demodulation in zero span
• Auto-find & smart marker peak tracking
• USB for waveform saving and PC connection
• Live, View, and Reference trace modes
• 6-hour lithium-ion battery operation
• Weighs just 0.58 kg
• Optional U01 Upgrade: Limit lines, data logging, triggering, compensation tables

High-performance, battery-powered spectrum analyzers ideal for RF engineers and field use.

Key Features:

• Frequency range: 10MHz to 3.6GHz or 6.0GHz
• -120dBm typical noise floor
• Resolution bandwidths from 300Hz to 10MHz
• AM/FM audio demodulation with zero span
• Live, View & Reference traces with markers
• Smart marker tracking with peak detection
• USB data logging & real-time PC view
• Compact, lightweight (0.56 kg) with >3hr battery
• Optional U02 features: limit lines, OBW, ACPR, AM/FM waveform demodulation

A high-purity 20MHz DDS function generator designed for engineers requiring precision signal output, advanced modulation, and digital control.

Key Features:

• Frequency range: 0.001Hz to 20MHz
• High resolution: 6 digits or 1mHz
• Excellent stability (1ppm) and 10ppm one-year accuracy
• Digital control for phase-continuous sweep (linear or logarithmic)
• Output range: 5mV to 20V peak-to-peak from 50 or 600 Ohms
• Low distortion sine wave with high spectral purity
• Built-in modulation: AM, FSK, gated mode, tone switching
• Store and recall multiple instrument setups
• USB and RS232 interfaces for remote control

A high-performance 20MHz DDS function generator offering precise waveform control, high spectral purity, and flexible remote interfacing.

Key Features:

• Frequency range: 0.001Hz to 20MHz
• High resolution: 6 digits or 1mHz
• Frequency stability: ±1ppm, accuracy: ±10ppm
• Ultra-low distortion sine waves with high spectral purity
• Internal linear/log sweep with phase continuity
• Built-in AM, FSK, gated, and tone-switching modes
• Output: 5mV to 20V pk-pk from 50Ω or 600Ω
• Store and recall multiple instrument set-ups
• USB and RS232 interfaces for remote programming

High-performance dual-channel function and arbitrary waveform generator with up to 240 MHz output for advanced test and signal needs.

Key Features:

• Frequency range from 40 MHz to 240 MHz
• Dual independent or coupled full-performance channels
• Precise phase control: 0.001° resolution
• Arbitrary waveform support up to 800 MS/s
• Replay rates up to 80 MHz
• Wide range of built-in and user-defined waveforms
• Pulse generation up to 100 MHz, low jitter
• Internal/external modulation, sweep, gated, and burst modes
• USB, LAN (LXI compliant), and optional GPIB
• PC software for waveform generation and editing

Key Features:

• Single output up to 360W: Choose between 18V/20A or 35V/10A
• Mixed-mode regulation for high accuracy and low noise
• Fanless convection cooling for completely silent operation
• Bench or rack mountable, front and rear terminals
• OVP trip, high-resolution settings, and remote sense terminals
• P models offer USB, RS232, LAN interfaces (GPIB optional)
• Rotary, keypad, and step control for voltage and current
• Non-volatile memory for storing up to 25 user presets
• Seamless integration with Test Bridge software and automation systems

The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields – including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price. IEC 60601-1-2 calling out IEC 61000-4-39 magnetic immunity for close proximity testing requirements can also now be met with the 10 kHz unit.

• Frequency Range:
  • 10 kHz – 30 MHz Conducted
  • 5 MHz – 1GHz Radiated
• Frequency step:
  • 10/500 kHz switchable CE
  • 5/10 MHz switchable RE
• Includes: Generator, antenna, charger, wood case

• 10 kHz – 3 GHz, 40dB Gain, 5dB N.F.
• Compensation for long cable loss for EMI Measurement
• Improve system noise floor flatness
• High EMI performance
• High linearity LNA for EMI measurement
• High dynamic range
• Unconditionally Stable
• State-of-the-Art Technology

• EMI Measurements:
  • FFT-based dual-channel receiver
  • According to CISPR16-1-1
  • Peak, Quasi-Peak, and Average Detectors
  • Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
  • The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)