Products

The DYN 8WD I-30t Dynamometer integrated into TT 16.0-30t Turntable is a high-capacity vehicle testing solution designed for EMC-compliant measurement and simulation.

Key Features:

• Load capacity: 30,000 kg with adjustable axle configuration
• Maximum dynamometer speed: 120 km/h
• Turntable diameter: 16.0 m, rotational speed 0.1–0.5 rpm
• Adjustable track width: 900 mm – 2700 mm
• Turntable height: 2800 mm, stainless steel cover plate
• Servo motor-driven turntable with bevel gear for smooth rotation
• Integrated emergency stop and safety switches
• Software-controlled with Maturo DynSoft, including cycle simulation, speed, torque, and force monitoring
• EMC compliant: emissions typically 10 dB under CISPR 12 and CISPR 25 limits
• Supports advanced vehicle test cycles, ABS/ESP testing, uphill/downhill simulation, and tractive force control

The EASY-DRIVER Power Supply is a compact digital bipolar power supply series designed for precise current control and flexible integration in laboratory and industrial environments. Delivering up to 200 W output power, this highly configurable unit combines advanced digital control with reliable Ethernet connectivity for seamless monitoring and operation. With multiple output configurations and low noise performance, the EASY-DRIVER Power Supply provides a cost effective and high performance solution for powering sensitive electronic loads.

Key Features

• Compact bipolar digital power supply with output power up to 200 W
• Multiple output ratings including ±1 A at ±12 V, ±2 A at ±20 V, ±5 A at ±20 V and ±10 A at ±20 V
• Digital current control loop for precise and stable operation
• Low noise and high bandwidth output performance
• Ethernet connectivity with TCP IP and UDP communication
• Multi DSP architecture for reliable digital signal processing
• Local display for output current and voltage monitoring
• LED indicators for real time system status
• Built in protections including over voltage and over temperature
• External interlock signal and inductive load discharge circuitry
• Compatible with laboratory equipment and standalone installations

EMC001330SE | 10 kHz – 3 GHz | 30 dB Gain | Low Noise Preamplifier

Key Features:

• Wide frequency range: 10 kHz to 3 GHz
• High gain: 30 dB minimum with ±1.5 dB flatness
• Low noise figure: ≤ 5 dB for precise EMI measurements
• Ideal for compensating long cable loss
• High linearity and dynamic range
• Unconditionally stable, reliable performance
• Compact, portable, and robust design
• Compatible with major EMI test standards (CISPR, MIL-STD, ANSI)
• 110–240V AC universal power support
• Includes AC to DC inverter and N-type connectors

EMC03640A Low Noise Preamplifier – 30 MHz to 6 GHz

Key Features:

• Wide frequency range: 30 MHz to 6 GHz
• High gain: 40 dB minimum with ±2.5 dB flatness
• Low noise figure: ≤ 2.5 dB
• High EMI performance with excellent linearity
• Compensates for long cable loss in EMI measurements
• Improves system noise floor flatness
• Unconditionally stable with high dynamic range
• State-of-the-art technology for compliance testing
• Meets major EMI/EMC standards (ANSI, CISPR, MIL-STD)
• Compact and robust design with AC mains power input

The EMC051835SE is a high-performance preamplifier designed to deliver exceptional gain and EMI measurement accuracy across a wide frequency range.

Key Features:

• Wide frequency coverage: 500 MHz to 18 GHz
• 35 dB minimum gain with ±2.5 dB flatness
• Low noise figure of 3 dB for improved sensitivity
• High linearity LNA for EMI testing applications
• Enhances system noise floor flatness
• Compensates for long cable losses in EMI measurements
• Built-in AC input power with grounding detect circuit
• Durable, compact design with SMA female connectors
• Unconditionally stable performance

EMC1150 Low Noise Preamplifier (9 kHz – 1 GHz, 50 dB Gain)

Key Features:

• Wide frequency range: 9 kHz to 1 GHz
• High gain performance: 50 dB minimum
• Low noise figure: 1.8 dB typical, 2.5 dB max
• Excellent EMI measurement capability
• Improves system noise floor flatness
• High linearity and dynamic range
• Unconditionally stable operation
• Built-in AC input power with grounding detect circuit
• Compact, lightweight design (2.8 kg)
• Optional pulse/ESD protector available

EMC118A45SE Low Noise Preamplifier | 1–18 GHz, 45 dB Gain

Key Features:

• Wide 1–18 GHz frequency range for versatile EMI testing
• High 45 dB gain with flatness across the band
• Low noise figure (3.5–8 dB max) for improved sensitivity
• Compensates long cable loss for accurate EMI measurements
• Unconditionally stable with high linearity and dynamic range
• Built-in grounding detect circuit for reliable operation
• Compact design with 50-ohm SMA female connectors
• Available in multiple versions with mounting options

Key Features:

• Wide frequency range: 18–40 GHz
• 40 dB minimum gain with ±4.5 dB flatness
• 5 dB maximum noise figure for accurate EMI testing
• Compensates for long cable loss in EMI measurements
• Enhances system noise floor flatness
• High linearity LNA for EMI compliance applications
• High dynamic range and unconditionally stable
• Built-in AC input power supply with grounding detect circuit
• Rugged 2.92 mm female connectors for reliability
• Versions: Bench model and mast-mount with clamp & power supply

The EMC184040SE is a high-performance low noise preamplifier designed for EMI measurements across 18–40 GHz. With 40 dB gain and a 5 dB noise figure, it ensures reliable, stable, and accurate performance for demanding EMC testing environments.

Key Features:

• Wide frequency range: 18–40 GHz
• 40 dB minimum gain with ±4.5 dB flatness
• 5 dB noise figure for low-noise operation
• Compensates for long cable losses in EMI measurements
• High linearity and dynamic range for precise testing
• Unconditionally stable design
• Available in multiple mounting versions (bench, tube clamp, box clamp)

EMCview PC Software Pre-Compliance Testing

Key Features:

• Easy-to-use software for radiated and conducted emissions testing.
• Pre-configured project files for CISPR-xx (EN550xx) standards and automotive EMC standards.
• Built-in amplitude correction for cables, LISNs, TEM cells, antennas, amplifiers, and probes.
• Supports spectrum analyzers from Rigol, Siglent, and R&S (FPC/FPH series).
• Dual measurement runs with Average/Quasi-Peak or Peak/Quasi-Peak modes.
• Fast Quasi-Peak scan of critical frequencies for efficient troubleshooting.
• Configurable limit lines, margins, and correction files.
• Automatic test reports and versatile import/export functions.
• Ideal for in-house EMC testing, design validation, and cost reduction.

EMScanner: 150 kHz – 8 GHz High-Frequency EMC Desktop Scanner

Key Features:

• Wide frequency coverage from 150 kHz to 8 GHz
• 3.5 mm effective spatial resolution for precise diagnostics
• Real-time spectral and spatial scans with peak-hold and comparison features
• Reduces testing time by over 100x and design cycle times by up to 50%
• Supports emission, immunity, EMI shielding, and broadband noise testing
• Compact, lightweight, and designed for high-speed, high-density PCB projects
• EMViewer Software for advanced scan visualization, reporting, and analysis
• Compatible with leading spectrum analyzers, supporting multiple formats and overlays

EMScannerR: 150 kHz – 8 GHz, up to 0.06 mm Resolution EMC Desktop Scanner

Key Features:

• Frequency coverage from 150 kHz to 8 GHz for complete diagnostics
• Ultra-high spatial resolution down to 0.06 mm across 8 levels
• Real-time spectral and spatial scanning with peak-hold and comparison tools
• Supports JPEG overlays, Gerber RS274x, and HPGL formats
• Reduces testing time by 100x and design cycle times by up to 50%
• Identifies hot spots, current loops, and unintended radiators instantly
• Designed for high-speed, high-density PCB projects across multiple industries
• EMViewer Software with 3D views, live overlays, and advanced reporting

EMSCOPE-RX4, 9 kHz – 110 MHz, 4 Channel Receiver for 3 Phase

Key Features:

• Quad-channel receiver for complete EMI measurements up to 110 MHz
• FFT-based dual-channel receiver according to CISPR 16-1-1
• Peak, Quasi-Peak, and Average detectors
• Resolution bandwidth filters: 200 Hz, 9 kHz, 120 kHz (CISPR), 1 kHz, 10 kHz (MIL)
• Fastest receiver in the market with 6 simultaneous measurements
• Supports common- and differential-mode modal measurements
• Compact, lightweight design with integrated pre-amp and pulse limiter
• Software included with real-time results, waterfall function, and auto compliance reports

The FAST-Bi-1K5 Power Supply is a high precision bipolar, bidirectional and regenerative digital power supply designed for demanding testing environments. Built in a compact 19 inch 2U form factor, it supports four quadrant operation and provides output ratings up to ±100 V and ±150 A. With advanced digital control, embedded monitoring tools and energy regenerative architecture, this power supply offers an efficient solution for battery testing, EV systems, fuel cells and laboratory research applications.

Key Features

• 1.5 kW bipolar bidirectional regenerative power supply
• Four quadrant operation across the voltage current plane
• Output ratings up to ±100 V and ±150 A
• Multiple regulation modes including CV, CC, CP and CR
• High precision 24 bit resolution at 100 kHz sampling rate
• Built in Arbitrary Waveform Generator operating at 100 kHz
• Integrated 4 channel oscilloscope for signal monitoring
• Embedded web server interface for remote control and configuration
• Gigabit Ethernet connectivity with TCP IP and UDP communication
• Energy regenerative architecture returning excess power to the grid
• Low noise and ripple due to high switching frequency design
• Parallel operation of up to four units for increased power capability

The FAST-PS Power Supply is a high performance bipolar digital power supply series designed for fast and precise current and voltage control. With power ratings up to 600 W, this advanced unit combines digital control technology with built in waveform generation, signal monitoring and flexible communication interfaces. The integrated web server and powerful control architecture make the FAST-PS Power Supply an ideal solution for laboratories, research facilities and demanding industrial applications.

Key Features

• High performance bipolar digital power supply with power ratings up to 600 W
• Precise current and voltage control modes for flexible operation
• Built in Arbitrary Waveform Generator operating at 100 kHz
• Integrated four channel oscilloscope with advanced triggering features
• Embedded Linux operating system with web based user interface
• High speed Ethernet connectivity with 10/100/1000 Mbit communication
• Dual SFP or SFP+ communication slots for fast feedback control
• Digital control loop for precise response and load adaptation
• Local display and interface for monitoring voltage and current
• Integrated protection including over voltage, over current and over temperature
• Optional analog control input for amplifier compatibility

The FAST-PS-1K5 Power Supply is a high performance bipolar digital power supply designed for demanding laboratory, industrial and research applications. Delivering up to 1.5 kW of output power, this advanced system provides precise current and voltage control along with integrated monitoring tools and flexible communication interfaces. With digital control architecture, built in web server functionality and high stability sensing technology, the FAST-PS-1K5 Power Supply offers a reliable solution for battery testing, superconducting magnet systems and advanced power electronics applications.

Key Features

• High performance bipolar digital power supply with power ratings up to 1.5 kW
• Accurate current and voltage control for precision power applications
• Output models available up to 100 A and 100 V
• Digital control loop for flexible configuration and load adaptation
• Integrated web server for monitoring and system configuration
• Built in waveform generation and triggering capabilities
• Four channel oscilloscope monitoring at 100 ksps
• High precision current sensing using 0 FLUCS DCCT technology
• Gigabit Ethernet connectivity with additional SFP communication slots
• Optional four quadrant operation with dedicated external crate
• Quench protection support for superconducting magnet systems
• Local display and interface for monitoring voltage and current