Products

High-performance power simulator designed for advanced EMC and automotive voltage testing.

Key Features:

• Supports 12V, 24V, 42V, 48V, and 70V automotive systems
• Battery simulation with up to 220A current
• Fast voltage rise time up to 100V/µs
• ISO 7637-2 and ISO 16750-2 compliant
• Integrated Impulse Recording Function (IRF)
• Full remote control via CAR-Remote software
• Ethernet interface and built-in safety interlock
• Cooling via fans and heat sink for reliable operation
• Compact 19-inch rackmount desktop system (60 kg)
• Overvoltage and thermal protection included

T3AFG Series – Waveform Generators from Teledyne Test Tools combine precision, speed, and flexibility with advanced DDS technology for high-quality signal generation.

Key Features:

• Models available with 30 MHz to 500 MHz bandwidth
• Dual-channel output with 20 Vpp amplitude
• Max sampling rate up to 2.4 GSa/s
• 14-bit or 16-bit vertical resolution (model-dependent)
• 4.3″ responsive touchscreen display
• 196 built-in arbitrary waveforms
• Supports AM, FM, PM, PSK, FSK, ASK, PWM, Sweep, Burst, Harmonic
• USB Host, USB Device, LAN VXI-11 standard interfaces
• Optional IQ modulation support (on high-end models)
• True waveform combination and flexible phase/channel control

T3AWG3K Series – Waveform Generators deliver high-definition, multi-channel precision for engineers who demand signal quality, flexibility, and performance.

Key Features:

• Models available with 250 MHz or 350 MHz sinewave frequency
• 2, 4, and 8 analog channel configurations
• 16-bit vertical resolution for high signal fidelity
• Max sampling rate of 1.2 GS/s
• Output voltage window up to ±24 V (into High Impedance)
• 128 Mpts/channel memory (upgradeable to 1 Gpts/channel)
• True Arbitrary Mode and Direct Digital Synthesis (DDS)
• Add 8, 16, or 32 digital patterns synchronized with analog output
• Ideal for mixed-signal testing, high-voltage waveform generation, and multi-domain R&D

T3DMM Series – Digital Multimeters deliver precision, speed, and display-rich features, ideal for professional labs, R&D, and production testing.

Key Features:

• Available in 4.5-digit (60,000 counts) and 6.5-digit (2,200,000 counts) models
• True RMS AC voltage and current measurement
• 4.3” TFT-LCD with 480×272 resolution
• Multiple display modes: Number, Histogram, Trend Chart, Bar Meter, Statistics
• Advanced math functions: Max, Min, Avg, Std Dev, dBm/dB, Relative, Pass/Fail
• Supports remote operation via USB, LAN, SCPI commands
• Built-in cold terminal thermocouple compensation
• Wide range of measurements: Voltage, Current, Resistance, Capacitance, Frequency, Period, Temperature
• Internal 1GB storage and USB host for external data access
• User-friendly softkey interface and built-in help system

T3PS Series – Power Supplies by Teledyne Test Tools deliver precision, flexibility, and control in a compact form for both lab and industrial use.

Key Features:

• Programmable and non-programmable options with up to 4 independent outputs
• Wide voltage and current ranges up to 60 V / 200 A / 1520 W
• Multiple display types: TFT LCD, dual numeric, high-resolution panels
• Output modes: Constant Voltage (CV), Constant Current (CC), Constant Resistance (CR)
• Low ripple and fast transient response: ≤1 mVrms, ≤50 µs
• Built-in series/parallel tracking, electronic load modes, and remote sense terminals
• Interfaces: USB, LAN, RS-232, RS-485, Analog Control, Ext I/O
• Advanced features: OVP, OCP, UVL, programmable slew rates, panel lock
• Ideal for use in automotive, mobile, defense, research labs, and education

The Teledyne T3SA Series Spectrum Analyzers deliver high-performance signal analysis from 9 kHz to 3.2 GHz in a compact, easy-to-use design. Ideal for R&D, education, production, and pre-compliance testing, it features a large touchscreen and advanced digital IF technology.

Key Features:

• All Digital IF technology10.1”
• WVGA (1024 x 600) touchscreen display
• Frequency range from 9 kHz to 3.2 GHz
• -161 dBm/Hz displayed average noise level (typical)
• -98 dBc/Hz @ 10 kHz offset phase noise (typical)
• Total amplitude accuracy < 0.7 dB
• 1 Hz minimum resolution bandwidth (RBW)
• Built-in preamplifier for improved sensitivity

Typical Applications

● Research Laboratory
● Development Laboratory
● Repair and Maintenance
● Calibration Laboratory
● Automatic Production Test
● General bench-top use

Teledyne Test Tools T3DAQ1-16 is a powerful 16-channel Data Acquisition Unit, perfect for R&D and production testing environments.

Key Features:

• 16-channel input (12 multi-purpose + 4 current)
• Built on a 6½ digit digital multimeter platform
• Wide range of electrical measurements: voltage, current, resistance, capacitance, frequency
• True-RMS accuracy for AC voltage and current
• Large 4.3″ TFT LCD with dual-display views
• Display modes: Histogram, Trend, Bar Graph, Statistics, or Number
• USB Host, USB Device, and LAN connectivity
• Cold terminal thermocouple compensation
• Softkey interface for intuitive navigation

The T3VNA Series from Teledyne Test Tools is a powerful, compact solution for engineers who demand precision and versatility in RF and spectrum analysis.

Key Features:

• Vector Network Analysis from 10 MHz to 3.2 GHz
• Spectrum Analysis from 9 kHz to 3.2 GHz
• All-digital IF technology for clean signal processing
• Built-in tracking generator (up to 1.5 GHz)
• Advanced features like Distance-to-Fault, OBW, ACPR
• -156 dBm/Hz typical displayed average noise level
• -98 dBc/Hz @ 10 kHz offset phase noise
• 1 Hz minimum RBW for high-resolution measurements
• 10.1″ WVGA display for smooth operation
• High accuracy with <1.2 dB amplitude error

The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields – including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price. IEC 60601-1-2 calling out IEC 61000-4-39 magnetic immunity for close proximity testing requirements can also now be met with the 10 kHz unit.

The EME Guard Plus is a lightweight and robust personal protection monitor designed to ensure the safety of workers operating near electromagnetic field (EMF) emitters such as antennas, radars, and base stations. With a frequency range of 1 MHz to 40 GHz, this device continuously monitors and records EMF exposure levels while providing immediate audio, visual, and vibrating alerts when exposure exceeds predefined safety thresholds. Customizable alarm settings and a triaxial isotropic probe ensure accurate and reliable measurements.

The EME Guard XS Radar is a state-of-the-art RF safety monitor, specifically designed for workers operating near radar transmitters and antennas. With its isotropic tri-axis E-field sensors, this compact device provides continuous EMF monitoring over a frequency range of 1 MHz to 40 GHz, including short pulsed signal detection. Equipped with audio and visual alarms, it alerts users instantly when EMF exposure exceeds predefined safety thresholds, creating a safer working environment for military, aviation, and telecom personnel.

Solutions For:

•  Accurate measurement with tri-axis sensors
• Instant audio and visual alarm
• Robust, reliable and user-friendly
• Covers 5G / 6G bands, measuring up to 71 GHz

User profile:

• Persons working near antennas including installation and maintenance workers, broadcast, PMR and mobile phone operators or regulatory body employees

Measurement capabilities:

• Continuous monitoring of Electromagnetic Field levels with isotropic tri-axis E-field sensors
• EMF Level indicated by a LED color scale
• Audio and visual alarms triggered when EMF exceeds the reference level

The EMI 64k software allows to embed the TDEMI systems in a fully automated test environment.

• Full automation of EMI testing according to all commercial and military standards
• Automated control of turntable, antenna and other equipment
• Height and Angular Scan
• Procedures according to standards as well as customized procedures
• Reducing the cost for EMC and communication testing and certification by tailored packages

The measurement system for all emission measurments in the frequency range 1 Hz – 44 GHz.

• Frequency Range  1 Hz – 30MHz, 1GHz, 3GHz, 6GHz, 9GHz, 18GHz, 26GHz, 40 GHz and 44GHz
• 225 MHz Real-time Analysis Bandwidth
• Weighted Real-time Spectrogram up to 44 GHz
• CISPR Bandwidths 200 Hz, 9 kHz, 120 kHz, 1 MHz
• MIL/DO Bandwidths 10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz, 1 MHz

The measurement system for all emission measurments in the frequency range 1 Hz – 44 GHz.

• Full compliance EMI Reciever according to standard CISPR 16-1· 1, ANSI C63.2, MIL->461, and DO·160
• Spectrum Analyzer
• Integrated LOW Noise Ampllfier (lNAI)
• Integrated Preselect1on
• Tradttional and FFT·based Mode
• Automatic Stepped Attenuator
• Ultra Low Noise Floor
• Excellent spurious Performance
• Real-time Spectrum Analyzer optional
• Vast IQ-Bandwidth

TDEMI Mobile+. The ultra mobile EMI receiver – Emission measurements everytime, everywhere. Fully stand-alone operable.

• Frequency Ranges 10Hz – 1GHz, 3GHz, 6GHz or 7GHz
• 16000x faster than conventional receivers
• Super compact design and 12V supply
• 225 MHz fully gapless real-time analysis bandwidth
• Weighted Real-time Spectrogram