Products

• S-parameters DC to 40 GHz, single-ended and mixed-mode
• Impedance Profile with <1 mm resolution, differential and common-mode
• Internal, automatic OSLT calibration
• USB-connected, small, lightweight
• Flexible display of the measurements
• Remove effects from fixtures, connectors and cables
• Emulate eye diagrams with CTLE, DFE and FFE equalization
• Advanced jitter analysis

• 4/8 analog channels + 1 external trigger
• Analog channel bandwidth: up to 2 Ghz; real-time sampling rate of up to 10 GSa/s
• Vertical resolution: 12-bits
• Low noise floor: 153 μVrms at full bandwidth of 2 GHz
• New generation of high speed display technology:
  • Waveform capture rates up to 170,000 wfm/s (normal mode), and 750,000 wfm/s (sequence mode)
  • Supports 256-level intensity grading and color temperature display modes
  • Memory depth up to 500 Mpts/channel
  • Digital trigger system
• Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, Qualified, Nth edge, Setup/hold, Delay and Video (HDTV supported)
• Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT and Manchester as standard
• Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time between segments to capture the qualifying event
• History waveform record (History) function, the maximum recorded waveform length is 80,000 frames
• Automatic measurements on 50+ parameters, supports statistics with histogram, track, trend, Gating measurement, and measurements on Math, History, Memory and Ref
• 4 Math traces (8 Mpts FFT, addition, subtraction, multiplication, division, integration, differential, square root, etc.), supports formula editor

✔ Available in 250 MHz & 350 MHz models
✔ 2, 4, and 8-channel options for multi-signal generation
✔ 16-bit vertical resolution for precise signal emulation
✔ Max sinewave frequency of 250 MHz & 350 MHz
✔ Wave Sequencing for complex test scenarios
✔ Mixed Signal Generation: Supports 8, 16, or 32 synchronized digital channels
✔ True Arbitrary Mode & Direct Digital Synthesis (DDS)
✔ Wideband output voltage window: ±24V (50Ω into High Impedance)
✔ Embedded noise simulation & jitter analysis
✔ Up to 1 Gpts of waveform memory per channel
✔ Seamless integration with LabVIEW™, MATLAB™, Python, and .NET

• Channel Configurations: Available in 2, 4, and 8-channel models.
• High Sampling Rate: Up to 12.32 GS/s in RF mode for high-frequency applications.
• Superior Resolution: 16-bit vertical resolution for ultra-precise signal generation.
• Waveform Memory: 4 Gpts per channel, ensuring long-duration complex waveform storage.
• High Output Voltage: Up to 5 Vpp output voltage with ±2.5 V baseline offset (50 Ohm).

✔ Multiple Bandwidth Options: 100 MHz, 200 MHz, and 350 MHz
✔ Fast Sampling Rate: Up to 2 GS/s (interleaved) for high-speed signal acquisition
✔ Extended Memory Depth: Up to 28 Mpts per channel for capturing intricate signal variations
✔ Serial Bus Trigger and Decode: Built-in support for I2C, SPI, UART, RS232, CAN, LIN
✔ Waveform Sequence Recorder: Capture and playback up to 80,000 recorded waveforms
✔ Advanced Triggering System: Includes Edge, Slope, Pulse Width, Window, Runt, Interval, and Pattern triggers
✔ Multi-Mode Display: Supports color temperature mapping and intensity grading for signal clarity
✔ MSO Upgrade Option: 16 digital channels available for mixed-signal debugging (on 4-channel models)
✔ Connectivity: USB, LAN, and external trigger output for remote data transfer and PC control

• Bandwidth Options: 100 MHz, 200 MHz, 350 MHz, and 500 MHz.
• Sampling Rate: Up to 2 GS/s (1 GS/s per channel in four-channel mode).
• Memory Depth: Up to 200 Mpts in interleaved mode for extended signal capture.
• High-Speed Capture: Waveform update rates of 120,000 wfm/s in standard mode and up to 500,000 wfm/s in sequence mode.
• Advanced Triggers: Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, and Serial triggering.
• MSO Functionality: Optional 16 digital channels for mixed-signal analysis.
• Waveform Recorder: History Mode allows users to store and replay up to 90,000 waveforms.
• Comprehensive Math Functions: Includes FFT, differentiation, integration, and enhanced resolution modes.
• 256-Level Intensity Grading: Color temperature display for identifying rare signal events.
• Connectivity: USB Host, USB Device, LAN, and External Trigger support for seamless data transfer and remote control.

• High Bandwidth & Sampling Rate: Models available in 200 MHz, 350 MHz, 500 MHz, and 1 GHz with up to 5 GS/s sample rate.
• Deep Memory Capture: Up to 250 Mpts in interleaved mode, allowing detailed waveform analysis.
• Advanced Triggering & Waveform Capture: Zone Triggering, History Mode (100,000 waveforms), and a waveform capture rate of 500,000 wfm/s.
• Math & Measurement Functions: 9 basic math functions (FFT, addition, subtraction, multiplication, division, etc.) and 50+ automatic measurement parameters.
• Bode Plot & Power Analysis: Standard features include Bode Plot for frequency response testing and comprehensive power analysis for applications like power quality assessment, current harmonics, inrush current, and switching loss.
• Mixed Signal Debugging: Optional 16-channel MSO capability for digital signal acquisition.
• Connectivity & Remote Access: USB, LAN, and embedded web server for remote control and data analysis.

• Available in 4.5-digit (60,000 count) and 6.5-digit (2,200,000 count) resolutions.
• Wide measurement range:
  • DC Voltage: Up to 1000V
  • AC Voltage: Up to 750V (True RMS)
  • Current: 10A (AC/DC)
  • Resistance: 100MΩ (2-wire/4-wire)
  • Capacitance: 2nF – 100mF
  • Temperature measurements with TC and RTD sensor support.
• High-speed measurements:
  • T3DMM4-5: 150 readings per second
  • T3DMM6-5: 10,000 readings per second
• Advanced mathematical functions such as Max, Min, Standard Deviation, dBm/dB, Relative Measurement, Pass/Fail Analysis, and Histograms.
• Connectivity: USB Device, USB Host, and LAN for remote operation via SCPI commands.
• Data Storage: 1GB NAND flash memory for saving configuration files and test data.
• Built-in cold junction compensation for accurate temperature measurements.
• File management system supporting U-disc and local storage for convenient data access.
• Comprehensive user interface with a dual-display system for easy navigation.
• Automatic measurement functions, including statistical analysis, gating, and reference functions.

• Protocol reports
• Generation of waveforms with synchronous data acquisition
• Modular Expandable
• Individual Waveform Generation
• Standard Libraries included
• Unlimited Waveform size
• 2 different Waveforms synchronously
• DLL’s for LabView, Vector CANoe / CAPL, C#, C++, ANSI C, Python, etc.
• Simulation of imported oscilloscope waveform

BOLAB revolutionizes EV testing with powerful, flexible, and modular HV Electric Vehicle Test Systems. These solutions offer high-speed testing, covering diverse profiles and budgets. Features include a modular design, adaptability, and WaveMaster Software for custom waveforms. Benefit from efficiency, precision, and cost-efficiency in EV testing. Discover the future of high-speed testing with BOLAB’s innovative solutions.

• Customizable & savable test setups
• Program & Datalog Storage
• User Defined Temperature Limits
• Local & Remote Operations
• LabView™ drivers
• IEEE-488, RS232 ports

• 20 Amp Operation: Full performance with 20 amp service
• Automatic Power Reduction: Reduces power usage during idle periods
• Heat Only Mode: Reduces power usage when cold temperatures are not used
• WhisperStream Technology: quieter, smooth-sounding operation, 56 dBA
• Frost Free Test Environment: dry air purge for tester interface, prevents condensation:
  0.5 to 3scfm (0.25 to 1.5 l/s)
• Heated Defrost: quickly removes moisture buildup from internal chiller
• DUT Temperature Control : Proprietary control algorithm enables DUT temperature to be directly controlled
• Transition Rate*
  -55 to +125°C, approx. 10 seconds
  125 to -55°C, approx. 10 seconds
• System Airflow Output*
  4 to 18scfm (1.9 to 8.5 l/s) Continuous
• Temperature Range*
  -80 to +225°C (60Hz) No LN2 or LCO2 Required

• High reliability thermal cycling without thermoelectric modules
• Temperature range: -65 to 175°C
• Cooling power:
  • 40W at -40°C for lower power devices
  • 55W at -55°C and 120W at -40°C.
• Transition rate: up to <35 sec over 25 to -40°C
• Easy and secure thermal connection to in-circuit or test socked DUT
• Touch-screen controller: user-programmable temperatures, graphing, data logging
• Communications options: Ethernet, USB, IEEE, RS232

-60° to +200°C

• Economy model with high thermal capacity
• Precise temperatures with fast transitions from -60 to 200°C
• No annual leak testing required per EU 517/2014 F-Gas Regulation
• Effective testing and conditioning of electronic components, boards, and modules
• Available for 50 and 60Hz operation
• No need for Liquid Nitrogen (LN2) or Liquid Carbon Dioxide (LCO2)
• Remote communications and set up and touch screen operation
• User Defined Temperature Limits

The Hi-Techniques FreeStyle series of Data Acquisition Systems is a versatile, capable solution for mobile and rugged data acquisition applications. FreeStyle was designed from the ground up to make data acquisition as fast and as easy as possible. Just grab your FreeStyle and your computer and head out to the test site.

Flexibility by Design