Products

Any shielded room can be transformed into a reverberation chamber with this retrofit solution. Designed with aluminum panels and customizable stirrers, it ensures improved Q factor and precise EMC testing conditions.

Key Features:

• Converts shielded rooms into functional reverberation chambers
• High Q factor for enhanced electromagnetic testing
• Customizable stirrer configurations (1 or 2+ stirrers)
• Ensures strong electrical bonding to prevent oxidation
• Suitable for automotive, avionics, military, space, and telecom markets
• Compatible with IEC/EN 61000-4-20 & IEC/EN 61000-4-3 standards

SB3G Shielded Box – EMI & RF Protection provides advanced shielding for sensitive equipment in high-interference environments.

Key Features:

• Superior EMI/RF shielding up to 60 dB attenuation
• Wideband performance: DC – 3 GHz
• Integrated AC power filter (120/230V, 10A fuse)
• Multiple I/O ports: RF, fiber optic, USB, Ethernet
• Active cooling with thermostat-controlled fan
• Shielded viewing window for real-time monitoring
• Durable, lightweight aluminum enclosure (19 kg)

Shielded Chamber and Box Solutions are engineered for high-performance RF, EMI, and EMC testing across industries. Designed for 5G, aerospace, automotive, and military use, these solutions deliver exceptional shielding effectiveness with customizable options.

Key Features:

• Wide range of shielded chambers and boxes for commercial, industrial, and defense applications
• Effective for RF immunity testing, antenna measurements, and shielding verification
• Supports 5G and wireless/telecom testing environments
• Compatible with IEC/EN 61000-4-20 and IEC/EN 61000-4-3 standards
• Available in multiple models: SHB-50, SHB-50A, SHB-100, SHB-200, and Aluminum Shelter
• Custom-built solutions to meet specific testing needs
• Supports shielding effectiveness test setup with advanced antenna configurations

T3AFG Series – Waveform Generators from Teledyne Test Tools combine precision, speed, and flexibility with advanced DDS technology for high-quality signal generation.

Key Features:

• Models available with 30 MHz to 500 MHz bandwidth
• Dual-channel output with 20 Vpp amplitude
• Max sampling rate up to 2.4 GSa/s
• 14-bit or 16-bit vertical resolution (model-dependent)
• 4.3″ responsive touchscreen display
• 196 built-in arbitrary waveforms
• Supports AM, FM, PM, PSK, FSK, ASK, PWM, Sweep, Burst, Harmonic
• USB Host, USB Device, LAN VXI-11 standard interfaces
• Optional IQ modulation support (on high-end models)
• True waveform combination and flexible phase/channel control

T3AWG3K Series – Waveform Generators deliver high-definition, multi-channel precision for engineers who demand signal quality, flexibility, and performance.

Key Features:

• Models available with 250 MHz or 350 MHz sinewave frequency
• 2, 4, and 8 analog channel configurations
• 16-bit vertical resolution for high signal fidelity
• Max sampling rate of 1.2 GS/s
• Output voltage window up to ±24 V (into High Impedance)
• 128 Mpts/channel memory (upgradeable to 1 Gpts/channel)
• True Arbitrary Mode and Direct Digital Synthesis (DDS)
• Add 8, 16, or 32 digital patterns synchronized with analog output
• Ideal for mixed-signal testing, high-voltage waveform generation, and multi-domain R&D

T3AWG6K Series – Waveform Generators combine precision, flexibility, and speed for advanced signal generation in R&D and automated test environments.

Key Features:

• Available in 2, 4, or 8 analog channel configurations
• Up to 12.32 GS/s sampling rate (RF mode)
• 16-bit vertical resolution for high signal fidelity
• 4 Gpts waveform memory per channel
• Up to 32 synchronous digital channels
• Built-in waveforms: sine, square, ramp, noise, gaussian, exponential, DC, and more
• Advanced modulations: AM, FM, PM, PWM, FSK, PSK
• Variable clock true-arbitrary technology up to 6.16 GS/s (12.32 GS/s in RF)
• Digital I/Q modulation with 16-bit components
• Multifunctional operation: waveform generator, pattern generator, modulator

T3DMM Series – Digital Multimeters deliver precision, speed, and display-rich features, ideal for professional labs, R&D, and production testing.

Key Features:

• Available in 4.5-digit (60,000 counts) and 6.5-digit (2,200,000 counts) models
• True RMS AC voltage and current measurement
• 4.3” TFT-LCD with 480×272 resolution
• Multiple display modes: Number, Histogram, Trend Chart, Bar Meter, Statistics
• Advanced math functions: Max, Min, Avg, Std Dev, dBm/dB, Relative, Pass/Fail
• Supports remote operation via USB, LAN, SCPI commands
• Built-in cold terminal thermocouple compensation
• Wide range of measurements: Voltage, Current, Resistance, Capacitance, Frequency, Period, Temperature
• Internal 1GB storage and USB host for external data access
• User-friendly softkey interface and built-in help system

T3PS Series – Power Supplies by Teledyne Test Tools deliver precision, flexibility, and control in a compact form for both lab and industrial use.

Key Features:

• Programmable and non-programmable options with up to 4 independent outputs
• Wide voltage and current ranges up to 60 V / 200 A / 1520 W
• Multiple display types: TFT LCD, dual numeric, high-resolution panels
• Output modes: Constant Voltage (CV), Constant Current (CC), Constant Resistance (CR)
• Low ripple and fast transient response: ≤1 mVrms, ≤50 µs
• Built-in series/parallel tracking, electronic load modes, and remote sense terminals
• Interfaces: USB, LAN, RS-232, RS-485, Analog Control, Ext I/O
• Advanced features: OVP, OCP, UVL, programmable slew rates, panel lock
• Ideal for use in automotive, mobile, defense, research labs, and education

The Teledyne T3SA Series Spectrum Analyzers deliver high-performance signal analysis from 9 kHz to 3.2 GHz in a compact, easy-to-use design. Ideal for R&D, education, production, and pre-compliance testing, it features a large touchscreen and advanced digital IF technology.

Key Features:

• All Digital IF technology10.1”
• WVGA (1024 x 600) touchscreen display
• Frequency range from 9 kHz to 3.2 GHz
• -161 dBm/Hz displayed average noise level (typical)
• -98 dBc/Hz @ 10 kHz offset phase noise (typical)
• Total amplitude accuracy < 0.7 dB
• 1 Hz minimum resolution bandwidth (RBW)
• Built-in preamplifier for improved sensitivity

Typical Applications

● Research Laboratory
● Development Laboratory
● Repair and Maintenance
● Calibration Laboratory
● Automatic Production Test
● General bench-top use

Teledyne Test Tools T3DAQ1-16 is a powerful 16-channel Data Acquisition Unit, perfect for R&D and production testing environments.

Key Features:

• 16-channel input (12 multi-purpose + 4 current)
• Built on a 6½ digit digital multimeter platform
• Wide range of electrical measurements: voltage, current, resistance, capacitance, frequency
• True-RMS accuracy for AC voltage and current
• Large 4.3″ TFT LCD with dual-display views
• Display modes: Histogram, Trend, Bar Graph, Statistics, or Number
• USB Host, USB Device, and LAN connectivity
• Cold terminal thermocouple compensation
• Softkey interface for intuitive navigation

Key Features:

• Wide temperature range from -65°C to +300°C
• Compatible with 150mm, 200mm, and 300mm wafer sizes
• Options for mechanical refrigeration, glycol/water, or air cooling
• Heating methods: ThermoElectric or Resistive, depending on model
• Retrofits available for existing probe stations
• Customizable surface plating: gold or nickel
• Supports advanced applications like low leakage probing (fA level) and high-voltage probing (up to 10kV)

ThermoSpot Systems – Benchtop Direct Contact Cooling and Heating Solution

The Temptronic® ThermoSpot® delivers high-performance temperature control for IC testing and high-Watt devices with unmatched cooling capacity.

Key Features:

• Reliable thermal cycling without thermoelectric modules
• Wide temperature range: -65°C to +175°C
• Cooling power: 40W at -40°C, 55W at -55°C, 120W at -40°C
• Fast transitions: <35 seconds from +25°C to -40°C
• Secure thermal contact with ThermoBridge™ design
• Touch-screen with data logging and programmable settings
• Multiple communication ports: Ethernet, USB, IEEE, RS232

ThermoSpot® Systems – Direct Contact Thermal Test Solutions

Key Features:

• Temperature range: -65°C to +175°C
• Cooling power up to 120W at -40°C
• Fast transition rate (<35 sec from +25°C to -40°C)
• Reliable thermal cycling without thermoelectric modules
• Flexible thermal probe with interchangeable ThermoBridge™
• Touchscreen controller with programmable profiles
• Connectivity options: Ethernet, USB, IEEE, RS232
• Easy, secure connection to in-circuit or socketed DUTs

Key Features:

• Free-standing turntable designed for electromagnetic absorption chambers
• 0.3 m diameter with 50 kg load capacity
• Height: 190 mm, made of rigid PVC skin-foam sheets
• Rotating speed adjustable from 0.1 rpm to 2.5 rpm
• High positioning accuracy of ±0.5°
• Rotation angle: -200° to 400° with synchronous servo motor
• LAN (TCP/IP) control option via FCU3.0 or NCD Controller
• Central 50 mm opening for power supply insertion
• Interference suppression: 20 dB under DIN EN 55011:2018-05 class B
• Ideal for automotive, telecom, medical, and industrial EMC testing

The TT 1.0 PF Turn Table is a precision turntable designed for EMC and RF testing in anechoic and electromagnetic absorption chambers.

Key Features:

• Diameter: 1.0 m; height: 190 mm
• Load capacity up to 100 kg
• Free-standing design for chamber floor installation
• Adjustable rotation speed: 0.1–2.5 rpm
• Positioning accuracy: ±0.5°
• Rotating angle range: -200° to 400°
• Central 50 mm opening for power supply connections
• Controlled via LAN (TCP/IP) with FCU3.0 or NCD Controllers
• Durable PVC integral skin-foam cover plate
• Synchronous servo motor with toothed belt and worm gear drive

The T3VNA Series from Teledyne Test Tools is a powerful, compact solution for engineers who demand precision and versatility in RF and spectrum analysis.

Key Features:

• Vector Network Analysis from 10 MHz to 3.2 GHz
• Spectrum Analysis from 9 kHz to 3.2 GHz
• All-digital IF technology for clean signal processing
• Built-in tracking generator (up to 1.5 GHz)
• Advanced features like Distance-to-Fault, OBW, ACPR
• -156 dBm/Hz typical displayed average noise level
• -98 dBc/Hz @ 10 kHz offset phase noise
• 1 Hz minimum RBW for high-resolution measurements
• 10.1″ WVGA display for smooth operation
• High accuracy with <1.2 dB amplitude error