Products

The DYN 8WD I-30t Dynamometer integrated into TT 16.0-30t Turntable is a high-capacity vehicle testing solution designed for EMC-compliant measurement and simulation.

Key Features:

• Load capacity: 30,000 kg with adjustable axle configuration
• Maximum dynamometer speed: 120 km/h
• Turntable diameter: 16.0 m, rotational speed 0.1–0.5 rpm
• Adjustable track width: 900 mm – 2700 mm
• Turntable height: 2800 mm, stainless steel cover plate
• Servo motor-driven turntable with bevel gear for smooth rotation
• Integrated emergency stop and safety switches
• Software-controlled with Maturo DynSoft, including cycle simulation, speed, torque, and force monitoring
• EMC compliant: emissions typically 10 dB under CISPR 12 and CISPR 25 limits
• Supports advanced vehicle test cycles, ABS/ESP testing, uphill/downhill simulation, and tractive force control

EMC001330SE | 10 kHz – 3 GHz | 30 dB Gain | Low Noise Preamplifier

Key Features:

• Wide frequency range: 10 kHz to 3 GHz
• High gain: 30 dB minimum with ±1.5 dB flatness
• Low noise figure: ≤ 5 dB for precise EMI measurements
• Ideal for compensating long cable loss
• High linearity and dynamic range
• Unconditionally stable, reliable performance
• Compact, portable, and robust design
• Compatible with major EMI test standards (CISPR, MIL-STD, ANSI)
• 110–240V AC universal power support
• Includes AC to DC inverter and N-type connectors

EMC03640A Low Noise Preamplifier – 30 MHz to 6 GHz

Key Features:

• Wide frequency range: 30 MHz to 6 GHz
• High gain: 40 dB minimum with ±2.5 dB flatness
• Low noise figure: ≤ 2.5 dB
• High EMI performance with excellent linearity
• Compensates for long cable loss in EMI measurements
• Improves system noise floor flatness
• Unconditionally stable with high dynamic range
• State-of-the-art technology for compliance testing
• Meets major EMI/EMC standards (ANSI, CISPR, MIL-STD)
• Compact and robust design with AC mains power input

The EMC051835SE is a high-performance preamplifier designed to deliver exceptional gain and EMI measurement accuracy across a wide frequency range.

Key Features:

• Wide frequency coverage: 500 MHz to 18 GHz
• 35 dB minimum gain with ±2.5 dB flatness
• Low noise figure of 3 dB for improved sensitivity
• High linearity LNA for EMI testing applications
• Enhances system noise floor flatness
• Compensates for long cable losses in EMI measurements
• Built-in AC input power with grounding detect circuit
• Durable, compact design with SMA female connectors
• Unconditionally stable performance

EMC1150 Low Noise Preamplifier (9 kHz – 1 GHz, 50 dB Gain)

Key Features:

• Wide frequency range: 9 kHz to 1 GHz
• High gain performance: 50 dB minimum
• Low noise figure: 1.8 dB typical, 2.5 dB max
• Excellent EMI measurement capability
• Improves system noise floor flatness
• High linearity and dynamic range
• Unconditionally stable operation
• Built-in AC input power with grounding detect circuit
• Compact, lightweight design (2.8 kg)
• Optional pulse/ESD protector available

EMC118A45SE Low Noise Preamplifier | 1–18 GHz, 45 dB Gain

Key Features:

• Wide 1–18 GHz frequency range for versatile EMI testing
• High 45 dB gain with flatness across the band
• Low noise figure (3.5–8 dB max) for improved sensitivity
• Compensates long cable loss for accurate EMI measurements
• Unconditionally stable with high linearity and dynamic range
• Built-in grounding detect circuit for reliable operation
• Compact design with 50-ohm SMA female connectors
• Available in multiple versions with mounting options

The EMC184040SE is a high-performance low noise preamplifier designed for EMI measurements across 18–40 GHz. With 40 dB gain and a 5 dB noise figure, it ensures reliable, stable, and accurate performance for demanding EMC testing environments.

Key Features:

• Wide frequency range: 18–40 GHz
• 40 dB minimum gain with ±4.5 dB flatness
• 5 dB noise figure for low-noise operation
• Compensates for long cable losses in EMI measurements
• High linearity and dynamic range for precise testing
• Unconditionally stable design
• Available in multiple mounting versions (bench, tube clamp, box clamp)

Key Features:

• Wide frequency range: 18–40 GHz
• 40 dB minimum gain with ±4.5 dB flatness
• 5 dB maximum noise figure for accurate EMI testing
• Compensates for long cable loss in EMI measurements
• Enhances system noise floor flatness
• High linearity LNA for EMI compliance applications
• High dynamic range and unconditionally stable
• Built-in AC input power supply with grounding detect circuit
• Rugged 2.92 mm female connectors for reliability
• Versions: Bench model and mast-mount with clamp & power supply

EMCview PC Software Pre-Compliance Testing

Key Features:

• Easy-to-use software for radiated and conducted emissions testing.
• Pre-configured project files for CISPR-xx (EN550xx) standards and automotive EMC standards.
• Built-in amplitude correction for cables, LISNs, TEM cells, antennas, amplifiers, and probes.
• Supports spectrum analyzers from Rigol, Siglent, and R&S (FPC/FPH series).
• Dual measurement runs with Average/Quasi-Peak or Peak/Quasi-Peak modes.
• Fast Quasi-Peak scan of critical frequencies for efficient troubleshooting.
• Configurable limit lines, margins, and correction files.
• Automatic test reports and versatile import/export functions.
• Ideal for in-house EMC testing, design validation, and cost reduction.

EMScanner: 150 kHz – 8 GHz High-Frequency EMC Desktop Scanner

Key Features:

• Wide frequency coverage from 150 kHz to 8 GHz
• 3.5 mm effective spatial resolution for precise diagnostics
• Real-time spectral and spatial scans with peak-hold and comparison features
• Reduces testing time by over 100x and design cycle times by up to 50%
• Supports emission, immunity, EMI shielding, and broadband noise testing
• Compact, lightweight, and designed for high-speed, high-density PCB projects
• EMViewer Software for advanced scan visualization, reporting, and analysis
• Compatible with leading spectrum analyzers, supporting multiple formats and overlays

EMScannerR: 150 kHz – 8 GHz, up to 0.06 mm Resolution EMC Desktop Scanner

Key Features:

• Frequency coverage from 150 kHz to 8 GHz for complete diagnostics
• Ultra-high spatial resolution down to 0.06 mm across 8 levels
• Real-time spectral and spatial scanning with peak-hold and comparison tools
• Supports JPEG overlays, Gerber RS274x, and HPGL formats
• Reduces testing time by 100x and design cycle times by up to 50%
• Identifies hot spots, current loops, and unintended radiators instantly
• Designed for high-speed, high-density PCB projects across multiple industries
• EMViewer Software with 3D views, live overlays, and advanced reporting

EMSCOPE-RX4, 9 kHz – 110 MHz, 4 Channel Receiver for 3 Phase

Key Features:

• Quad-channel receiver for complete EMI measurements up to 110 MHz
• FFT-based dual-channel receiver according to CISPR 16-1-1
• Peak, Quasi-Peak, and Average detectors
• Resolution bandwidth filters: 200 Hz, 9 kHz, 120 kHz (CISPR), 1 kHz, 10 kHz (MIL)
• Fastest receiver in the market with 6 simultaneous measurements
• Supports common- and differential-mode modal measurements
• Compact, lightweight design with integrated pre-amp and pulse limiter
• Software included with real-time results, waterfall function, and auto compliance reports

The FPP2.3-M Manual Field Probe Positioner is a precise manual height adjustment system for electromagnetic field probes, designed for uniform field calibration in EMC testing environments.

Key Features:

• Manual height adjustment: 0.2 – 2.3 m
• Maximum load capacity: 3 kg
• Total height: 2.5 m
• Fabricated from PVC and reinforced fiberglass, fully non-metallic
• Base dimensions: 0.5 m × 0.5 m with movable wheels
• Lightweight and portable: approx. 10 kg
• Compliant with EN61000-4-3 and IEC61000-4-3 standards
• Ideal for uniform field calibration and precise field probe positioning

The FPP2.3/1.5 M Field Probe Positioner is a high-precision, remote-controlled axial system designed for fast and automated electromagnetic field measurements.

Key Features:

• Remote-controlled horizontal movement for single-axis operation
• Moves 4 probes to 4 positions for rapid 16-point calibration
• Automates uniform field calibration (UFA) per EN61000-4-3 / IEC61000-4-3
• Load capacity: 3 kg
• Adjustable positioning speed (1–35 cm/s)
• High accuracy: ±0.5 cm
• Durable construction: plastic & reinforced fiberglass, minimal metal parts
• LAN (TCP/IP) interface for full remote operation
• Compatible with FCU 3.0 or NCD Controller

A turnkey solution for harmonics and flicker compliance, this system delivers powerful, efficient, and automated testing for today’s high-power demands.

Key Features:

• Fully compliant with IEC/EN 61000-3-2, -3-3, -3-11, and -3-12
• High-power testing up to 75 A and 50 kVA
• Regenerative AC power supply with energy recovery
• Programmable simulation: voltage, frequency, harmonics, interharmonics
• Precision impedance network for accurate flicker measurements
• Advanced power analyzer with harmonic and flicker metering
• Preloaded test sequences with automated software control
• Expandable to include dips, swells, and short interruptions

HDA125 High-Speed Digital Analyzer brings advanced logic analysis capabilities to your existing Teledyne LeCroy oscilloscopes. Compact, accurate, and versatile.

Key Features:

• 12.5 GS/s sample rate for high-speed digital capture
• Supports up to 18 digital channels
• Compatible with WaveMaster/SDA 8 Zi-B and LabMaster 10Zi-A oscilloscopes
• QuickLink Probe System for fast, low-impact signal access
• 3 GHz bandwidth and 80 ps timing accuracy
• Command bus decoding for in-depth DDR/LPDDR memory debugging
• Minimal signal loading with 110 kΩ, 0.12 pF tip impedance
• Cost-effective QuickLink solder-in tips simplify multi-point testing
• Ideal for mixed-signal, high-speed, and memory interface debugging