Products

Teledyne Test Tools Digital Power Meters provide reliable, high-precision AC and DC power measurements in a compact design. Ideal for R&D, QA, and compliance testing.

Key Features:

• Bandwidth: DC, 0.1 Hz to 100 kHz
• High-resolution 4″ and 5″ TFT LCD displays
• 19 power measurement parameters
• 16-bit ADC and 300 kHz sampling rate (T3PM1100)
• Waveform, harmonic, and integration functions
• External current sensor input (T3PM1100)
• Supports IEC 62301 and IEC 61000-4-7 standards
• Interfaces: USB, LAN, RS-232C
• Front/rear terminal inputs for flexible testing

HDA125 High-Speed Digital Analyzer brings advanced logic analysis capabilities to your existing Teledyne LeCroy oscilloscopes. Compact, accurate, and versatile.

Key Features:

• 12.5 GS/s sample rate for high-speed digital capture
• Supports up to 18 digital channels
• Compatible with WaveMaster/SDA 8 Zi-B and LabMaster 10Zi-A oscilloscopes
• QuickLink Probe System for fast, low-impact signal access
• 3 GHz bandwidth and 80 ps timing accuracy
• Command bus decoding for in-depth DDR/LPDDR memory debugging
• Minimal signal loading with 110 kΩ, 0.12 pF tip impedance
• Cost-effective QuickLink solder-in tips simplify multi-point testing
• Ideal for mixed-signal, high-speed, and memory interface debugging

Teledyne Test Tools LCR Meters offer precision testing in a compact form, perfect for R&D labs and production lines.

Key Features:

• 3.5” high-resolution color LCD display
• Test frequency up to 300 kHz with continuous output
• 0.05% basic measurement accuracy
• Spot or full frequency range with OPEN/SHORT correction
• Automatic Level Control (ALC) for consistent voltage on components like MLCCs
• Measure up to 4 parameters simultaneously
• DCR measurement & built-in ±2.5 V DC bias
• PASS/FAIL indicator and 10-bin sorting function
• List measurement for automated test sweeps (up to 10 points)
• Interfaces: RS-232C, USB, handler, and USB storage
• Compact 2U, 1/2 rack size for automated test setups

Teledyne Test Tools Milli Ohm Meter offers high-precision low-resistance measurement with advanced drive modes, temperature compensation, and fast sampling.

Key Features:

• 50,000-count high-resolution display
• 3.5″ TFT LCD (320×240)
• 0.05% measurement accuracy
• 1 Amp test current with 0.1 μΩ resolution
• Fast 60 readings per second
• Four-wire measurement method
• Temperature compensation and delayed measurement
• 20-panel memory settings
• Dry circuit testing (T3MIL50X only)
• USB, RS-232C, and EXT I/O interfaces
• Multiple drive modes: DC+, DC-, Pulsed, PWM (T3MIL50X)

T3AFG Series – Waveform Generators from Teledyne Test Tools combine precision, speed, and flexibility with advanced DDS technology for high-quality signal generation.

Key Features:

• Models available with 30 MHz to 500 MHz bandwidth
• Dual-channel output with 20 Vpp amplitude
• Max sampling rate up to 2.4 GSa/s
• 14-bit or 16-bit vertical resolution (model-dependent)
• 4.3″ responsive touchscreen display
• 196 built-in arbitrary waveforms
• Supports AM, FM, PM, PSK, FSK, ASK, PWM, Sweep, Burst, Harmonic
• USB Host, USB Device, LAN VXI-11 standard interfaces
• Optional IQ modulation support (on high-end models)
• True waveform combination and flexible phase/channel control

T3AWG3K Series – Waveform Generators deliver high-definition, multi-channel precision for engineers who demand signal quality, flexibility, and performance.

Key Features:

• Models available with 250 MHz or 350 MHz sinewave frequency
• 2, 4, and 8 analog channel configurations
• 16-bit vertical resolution for high signal fidelity
• Max sampling rate of 1.2 GS/s
• Output voltage window up to ±24 V (into High Impedance)
• 128 Mpts/channel memory (upgradeable to 1 Gpts/channel)
• True Arbitrary Mode and Direct Digital Synthesis (DDS)
• Add 8, 16, or 32 digital patterns synchronized with analog output
• Ideal for mixed-signal testing, high-voltage waveform generation, and multi-domain R&D

T3DMM Series – Digital Multimeters deliver precision, speed, and display-rich features, ideal for professional labs, R&D, and production testing.

Key Features:

• Available in 4.5-digit (60,000 counts) and 6.5-digit (2,200,000 counts) models
• True RMS AC voltage and current measurement
• 4.3” TFT-LCD with 480×272 resolution
• Multiple display modes: Number, Histogram, Trend Chart, Bar Meter, Statistics
• Advanced math functions: Max, Min, Avg, Std Dev, dBm/dB, Relative, Pass/Fail
• Supports remote operation via USB, LAN, SCPI commands
• Built-in cold terminal thermocouple compensation
• Wide range of measurements: Voltage, Current, Resistance, Capacitance, Frequency, Period, Temperature
• Internal 1GB storage and USB host for external data access
• User-friendly softkey interface and built-in help system

T3PS Series – Power Supplies by Teledyne Test Tools deliver precision, flexibility, and control in a compact form for both lab and industrial use.

Key Features:

• Programmable and non-programmable options with up to 4 independent outputs
• Wide voltage and current ranges up to 60 V / 200 A / 1520 W
• Multiple display types: TFT LCD, dual numeric, high-resolution panels
• Output modes: Constant Voltage (CV), Constant Current (CC), Constant Resistance (CR)
• Low ripple and fast transient response: ≤1 mVrms, ≤50 µs
• Built-in series/parallel tracking, electronic load modes, and remote sense terminals
• Interfaces: USB, LAN, RS-232, RS-485, Analog Control, Ext I/O
• Advanced features: OVP, OCP, UVL, programmable slew rates, panel lock
• Ideal for use in automotive, mobile, defense, research labs, and education

The Teledyne T3SA Series Spectrum Analyzers deliver high-performance signal analysis from 9 kHz to 3.2 GHz in a compact, easy-to-use design. Ideal for R&D, education, production, and pre-compliance testing, it features a large touchscreen and advanced digital IF technology.

Key Features:

• All Digital IF technology10.1”
• WVGA (1024 x 600) touchscreen display
• Frequency range from 9 kHz to 3.2 GHz
• -161 dBm/Hz displayed average noise level (typical)
• -98 dBc/Hz @ 10 kHz offset phase noise (typical)
• Total amplitude accuracy < 0.7 dB
• 1 Hz minimum resolution bandwidth (RBW)
• Built-in preamplifier for improved sensitivity

Typical Applications

● Research Laboratory
● Development Laboratory
● Repair and Maintenance
● Calibration Laboratory
● Automatic Production Test
● General bench-top use

Teledyne Test Tools T3DAQ1-16 is a powerful 16-channel Data Acquisition Unit, perfect for R&D and production testing environments.

Key Features:

• 16-channel input (12 multi-purpose + 4 current)
• Built on a 6½ digit digital multimeter platform
• Wide range of electrical measurements: voltage, current, resistance, capacitance, frequency
• True-RMS accuracy for AC voltage and current
• Large 4.3″ TFT LCD with dual-display views
• Display modes: Histogram, Trend, Bar Graph, Statistics, or Number
• USB Host, USB Device, and LAN connectivity
• Cold terminal thermocouple compensation
• Softkey interface for intuitive navigation

The T3VNA Series from Teledyne Test Tools is a powerful, compact solution for engineers who demand precision and versatility in RF and spectrum analysis.

Key Features:

• Vector Network Analysis from 10 MHz to 3.2 GHz
• Spectrum Analysis from 9 kHz to 3.2 GHz
• All-digital IF technology for clean signal processing
• Built-in tracking generator (up to 1.5 GHz)
• Advanced features like Distance-to-Fault, OBW, ACPR
• -156 dBm/Hz typical displayed average noise level
• -98 dBc/Hz @ 10 kHz offset phase noise
• 1 Hz minimum RBW for high-resolution measurements
• 10.1″ WVGA display for smooth operation
• High accuracy with <1.2 dB amplitude error

Single-phase, 2U, industrial amplifier/battery simulator

• Bench-sized
• Powered from 120V/230VAC
• Source and Sink (4 quadrant)
• Rugged Design
• 3-Year, No-Fault Warranty

Key Performance Capabilities:

• Drop outs and surges as fast as 1.2µs
• Small signal response up to 1 MHz
• 13.5 VDC at up to 28A
• Field-selectable ±40V, 75V or 150V potential

The EMI 64k software allows to embed the TDEMI systems in a fully automated test environment.

• Full automation of EMI testing according to all commercial and military standards
• Automated control of turntable, antenna and other equipment
• Height and Angular Scan
• Procedures according to standards as well as customized procedures
• Reducing the cost for EMC and communication testing and certification by tailored packages

The measurement system for all emission measurments in the frequency range 1 Hz – 44 GHz.

• Frequency Range  1 Hz – 30MHz, 1GHz, 3GHz, 6GHz, 9GHz, 18GHz, 26GHz, 40 GHz and 44GHz
• 225 MHz Real-time Analysis Bandwidth
• Weighted Real-time Spectrogram up to 44 GHz
• CISPR Bandwidths 200 Hz, 9 kHz, 120 kHz, 1 MHz
• MIL/DO Bandwidths 10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz, 1 MHz

The measurement system for all emission measurments in the frequency range 1 Hz – 44 GHz.

• Full compliance EMI Reciever according to standard CISPR 16-1· 1, ANSI C63.2, MIL->461, and DO·160
• Spectrum Analyzer
• Integrated LOW Noise Ampllfier (lNAI)
• Integrated Preselect1on
• Tradttional and FFT·based Mode
• Automatic Stepped Attenuator
• Ultra Low Noise Floor
• Excellent spurious Performance
• Real-time Spectrum Analyzer optional
• Vast IQ-Bandwidth

TDEMI Mobile+. The ultra mobile EMI receiver – Emission measurements everytime, everywhere. Fully stand-alone operable.

• Frequency Ranges 10Hz – 1GHz, 3GHz, 6GHz or 7GHz
• 16000x faster than conventional receivers
• Super compact design and 12V supply
• 225 MHz fully gapless real-time analysis bandwidth
• Weighted Real-time Spectrogram