Products

The 7548 Linear Amplifier is a high-output, low-noise solution engineered for precision and reliability in demanding environments.

Key Features:

• Up to 100 Ap / 195 Vp output
• Delivers 12,000W peak power for 40 ms
• Supports continuous 5,500W output into 1Ω load
• Operates from DC to 100 kHz bandwidth
• Field-selectable current or voltage mode
• Ideal for MIL-STD-704F three-phase testing
• Stackable for 800 Vp or 170 Ap system output
• Built-in protection against over-voltage, over-temp, and overload
• Intuitive LCD display and status indicators

7796HC Linear Power Amplifier – High Current DC & AC Precision

Key Features:

• Output up to 85A continuous, 200A in-rush current
• Frequency response: DC to 100+ kHz
• Four-quadrant operation: source and sink
• Field-selectable voltage or current modes
• Stable with resistive, inductive, and capacitive loads
• Multiple protections: Over/under voltage, current, and temperature
• Supports DC ripple, surge, dropout, and ground noise simulations
• Ideal for high-current DC Conducted Immunity testing
• LCD with real-time voltage and current metrics
• Supports both balanced and unbalanced inputs

Aetec 7794 High Current Industrial Amplifier

Key Features:

• Up to 200 Ap / 100 Vp; DC to 150 kHz bandwidth
• Stable with resistive, inductive, or capacitive loads
• Controlled-voltage or controlled-current operation
• Switchable rail supply for optimized load impedance
• 60A continuous output at 13.8V DC
• ±95V DC and >35 V/µs slew rate
• Four-quadrant operation: sourcing and sinking
• Extensive protection against overvoltage, overcurrent, overtemperature
• Rack-mountable chassis with LCD fault diagnostics

AETechron 7796 Amplifier – High-Current, Low-Impedance Industrial Power
Ideal for precision testing, EMC simulations, and MRI systems.

Key Features:

• Delivers over 200 Ap peak current, up to ±180V
• DC to 100 kHz bandwidth for versatile signal reproduction
• Four-quadrant operation (source/sink modes)
• Operates in both voltage and current-controlled modes
• Handles in-rush currents up to 200A
• Field-configurable rail supply modes for load optimization
• Advanced protection against voltage, current, and thermal faults
• Stackable for higher voltage or current (up to 800 Ap)

The DSR 400 Series Test System is a compact, high-performance simulator for rigorous AC and DC immunity testing. Built for DO 160 and MIL STD 704 compliance, it integrates a powerful waveform generator, cutting-edge power technology, and a vast standards library—making it an ideal solution for demanding EMC test labs.

Key Features:

• Complete Test Solution for DO 160 Sec. 16 and MIL STD 704
• Built-In Standards Library with 3,400+ automotive and aviation test routines
• 4-Quadrant Operation: Sources and sinks current for complex test needs
• High Surge Capability: Delivers 5x rated power for 200 ms
• Fast Rise Time: Less than 30 µs for real-time performance
• Modular Output: 80A or 160A continuous current options available
• Multiple Waveform Options: Includes sine, ripple, triangle, sawtooth, square, and DC
• Remote Control Ready: LAN and GPIO integration for larger systems
• Easy-to-Use Interface: Pre-configured or user-custom test sequences

An advanced firmware upgrade for the IM3570 that enables quick and accurate equivalent circuit analysis, ideal for in-depth component evaluation and quality control.

Key Features:

• Automatically selects the optimal equivalent circuit model from five typical options
• Minimizes discrepancies between measured and ideal frequency characteristics
• Determines acceptance/rejection of L, C, and R elements with precision
• Evaluates resonance sharpness (mechanical quality coefficient)
• Enables detailed analysis of piezoelectric elements and inductors through resonance

Featuring an ultra-compact 0.35”microLED display with high-brightnessand high-resolution technology,delivering dynamic visuals and seamlessintegration for next-generationautomotive heads-up display (HUD).

Key Features of High Brightness High Resolution 0.35″ Micro-Display:

• OVERVIEWUltra-High Brightness: Engineered to perform in a widerange of lighting conditions, ensuring excellent visibility inboth indoor and outdoor environments.
• Robust Durability: Built to withstand demandingconditions for long-term reliability.
• Ultra-Thin & Lightweight: Designed for seamlessintegration into compact spaces, leveraging microLED’sinherently slim profile without compromisingperformance.
• Power-Efficient Design: Consumes significantly less powercompared to traditional display technologies, extendingbattery life for wearable devices.

Engineered for cutting-edge EV, automotive, and aerospace compliance, the HVR 1000 is a complete high-voltage ripple test system built to handle demanding lab environments with unmatched precision and safety.

Key Features:

• Wide Frequency Range: AC ripple from 10 Hz to 200 kHz
• High Voltage Output: Up to 1000V DC and 60 kW power
• Waveform Versatility: Generates sine, triangle, and custom signals
• Robust Safety: Multi-layer overvoltage, overcurrent, and thermal protection
• Zero Licensing Fees: Future test standard updates included
• User-Centric Interface: Intuitive controls with HDMI and LAN support
• Flexible Configuration: Available as HVR 1000RG (Ripple Generator only)
• Space-Saving Design: Small footprint, ideal for compact lab setups

The HVR 1200RG Ripple Generator is a powerful, next-gen solution tailored for electric vehicle high-voltage testing. Designed for use with traction inverters and HIL test stands, this rugged system delivers unmatched ripple current and voltage capabilities across a wide frequency range.

Key Features:

• Ripple Current Output: Up to 600 A peak
• Voltage Range: 0 – 150 Vp (300 Vp-p)
• Wide Frequency Support: 150 Hz to 300 kHz
• DC Voltage Compatibility: 0 – 1200 V (or up to 2000 V in bridged mode)
• Data Monitoring: Real-time tracking of voltage, current, and impedance
• Built-In Protections: Handles short circuits and noisy DUTs effortlessly
• Modular & Expandable: Configurable for current and future EV standards
• Noise-Resistant: Engineered to operate accurately in high-noise environments

A high-speed, high-precision LCR meter ideal for low-ESR and impedance testing in advanced electronic components like polymer capacitors, inductors, and piezoelectric elements.

Key Features:

• Continuous LCR/DCR/sweep measurements with one instrument
• Ultra-fast testing speeds: 1.5 ms (1 kHz), 0.5 ms (100 kHz)
• High accuracy: ±0.08% basic accuracy for Z parameter
• Ideal for low-ESR measurement of functional polymer capacitors
• Suitable for resonance testing of piezoelectric elements
• Accurate DCR and L-Q testing of inductors, coils, and transformers

The Hioki IM7580A is a compact, high-speed impedance analyzer for 1 MHz to 300 MHz testing, ideal for both production and R&D. It works seamlessly with the IM9201 SMD fixture for reliable component testing.

Key Features:

• 1 MHz to 300 MHz frequency range
• 0.5 ms test speed
• ±0.72% basic accuracy
• Compact half-rack size with palm-sized test head
• Reliable contact check functions
• Frequency, level, and time sweeps in Analyzer Mode
• RF I-V method for precise measurement

The Hioki IM7581 is a compact, high-speed impedance analyzer designed for accurate testing from 100 kHz to 300 MHz. It’s ideal for both production and development environments.

Key Features:

• 100 kHz to 300 MHz frequency range
• 0.5 ms fastest test speed
• ±0.72% basic accuracy
• Compact half-rack size, palm-sized test head
• Reliable contact check via DCR, Hi-Z reject, or waveform judgment
• Supports frequency, level, and time sweeps in Analyzer Mode
• Uses RF I-V method for precise measurement

The Hioki Impedance Analyzer IM7587 3 GHz provides precision, speed, and versatility for impedance measurements from 1 MHz to 3 GHz, ideal for both R&D and mass production applications in electronic component testing.

Key Features:

• Frequency range: 1 MHz to 3 GHz
• Test speed: 0.5 ms
• Measurement variability: 0.07%
• Basic accuracy: ±0.65% reading
• RF I-V measurement technique
• Compact half-rack design with palm-sized test head
• Robust contact check capabilities
• Analyzer mode: frequency and level sweeps, time interval measurements

The Hioki Rack-mounted Multi-channel System Recorder (MR8741/MR8740) is a powerful, high-speed, single-device solution for waveform recording and generation. Ideal for test systems, it offers high-resolution, isolated multi-channel measurements with fast sampling capabilities.

Key Features:

• Integrated waveform recording and generation in one device
• Equipped with DVM Unit MR8990 for high-accuracy 24-bit resolution measurements
• Supports up to 16 channels (MR8741) for multi-channel testing
• Isolated input between channels and from input to chassis (up to 300 V AC/DC)
• High-speed sampling up to 20 MS/s
• Compact rack-mountable design (4U height, under 180 mm depth)
• Monitor display and setting access via DVI-D and mouse
• Enables remote measurement and control via LAN
• Browser-based screen monitoring or advanced control via Hioki 9333 LAN Communicator