Products

Multi-Range DC Power Supply with digital control, 3 or 4 Outputs, 315 to 420W with/without Remote Interfaces

• hree or four high performance outputs each with full functionality
• Range switching gives variable voltage/current combinations
• Shared power mode provides double power from a single output
• Low output noise and ripple via linear final regulation
• High setting resolution of up to 1mV and 0.1mA
• Variable OVP and OCP trips on all outputs
• 50 setting memories per output plus 50 linked memories
• Selectable voltage tracking (isolated tracking)
• Selectable current meter averaging
• Switchable remote sense capability
• Graphic LCD provides simultaneous output metering
• Numeric or spin-wheel control of all parameters
• Individual or combined output on/off control with programmable delay sequencing.
• 3U half-rack case for bench or rack mounting (4U rack kit accessory available)
• RS-232, USB and LAN (LXI) interfaces (P models), GPIB option
• Duplicate power & sense terminals at rear (P models)

Multi-Range DC Power Supply Triple Outputs, 3 x 35V/3A 315W, No Interfaces

• Three or four independent and full performance outputs
• Simultaneous display of meters and settings for all outputs
• Instant access to voltage/current setting for any output
• Multiple ranges on each output for wider voltage/current choice
• Instant individual on/off control plus sequencable multi on/of
• Up to 250 settings memories for individual or multiple outputs

with 10MHz to 3.6 or 6.0GHz bandwidth options

True hand-held battery powered RF spectrum analyzers.

• 10MHz to 3600MHz or 6000MHz frequency range
• Resolution bandwidths from 300Hz to 10MHz (1:3:10)
• -120dBm typical noise floor at -40dBm ref. level/10kHz RBW
• Measurement in dBm or dBµV, mV or µW
• Zero span mode with AM and FM audio demodulation
• Trace modes of normal, peak hold and trace average
• Live, View and Reference traces in contrasting colours
• Twin markers with readout of absolute & difference values
• Smart marker movement with selectable peak tracking
• Frequency counter with down to 10Hz resolution
• Frequency presets and independent state storage
• Auto-find automatically sets sweep parameters for the highest signal found
• Unlimited storage for waveforms, set-ups and screens
• User assignable file names, file stamping from real-time clock
• USB interfaces for Flash drives and PC connection
• Comprehensive status and context sensitive help screens
• Rechargeable lithium ion battery giving more than 3 hours continuous operation from a charge
• Smaller and lighter than other spectrum analyzers (weight only 0.56 kg)

DC Power Supply single output, 80V/50A 750W PowerFlex+, LAN & USB interfaces, GPIB Option

• Wide range of voltage/current combinations
• Up to 80V and up to 50A within the same power envelope
• Low output ripple and noise of <3mV rms at full power
• High setting resolution of 1mV
• Analogue control interfaces for voltage and current
• Bench or rack mounting, front and rear terminals
• LAN (LXI), USB, GPIB interfaces (GPIB optional on QPX750SP)

• 150kHz to 3GHz (TGR2053) and 150kHz to 1.5GHz (TGR2051) frequency range
• High signal purity, phase noise <-117dBc/Hz (typical) at 1GHz output and 10kHz offset
• Amplitude range of -127dBm to +13dBm
• 0.1dBm amplitude setting resolution
• Internal or external analogue modulations (AM, FM, PM)
• Amplitude can be set in dBm, dBμV or in linear Volts.
• Internal or external digital modulations – ASK, OOK, FSK, 3FSK, 4FSK, GFSK, MSK, GMSK, HMSK & PSK with U01 option
• Modulation Synchronisation
• Fast amplitude and/or frequency sweeps with comprehensive triggering
• 5ms sweep settling time
• 1ppm frequency accuracy, <1ppm drift in first year
• Modulation waveform output on the rear panel
• Internal waveforms include: Sine, Square, Ramp, Triangle, PRBS (various lengths) and user-defined pattern
• Simple operation with the colour touch screen
• Programmable via USB, LAN (LXI) and GPIB (optional), SCPI compatible
• Compatible with previous Aim-TTi RF generators

The EMI 64k software allows to embed the TDEMI systems in a fully automated test environment.

• Full automation of EMI testing according to all commercial and military standards
• Automated control of turntable, antenna and other equipment
• Height and Angular Scan
• Procedures according to standards as well as customized procedures
• Reducing the cost for EMC and communication testing and certification by tailored packages

The measurement system for all emission measurments in the frequency range 1 Hz – 44 GHz.

• Frequency Range  1 Hz – 30MHz, 1GHz, 3GHz, 6GHz, 9GHz, 18GHz, 26GHz, 40 GHz and 44GHz
• 225 MHz Real-time Analysis Bandwidth
• Weighted Real-time Spectrogram up to 44 GHz
• CISPR Bandwidths 200 Hz, 9 kHz, 120 kHz, 1 MHz
• MIL/DO Bandwidths 10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz, 1 MHz

The measurement system for all emission measurments in the frequency range 1 Hz – 44 GHz.

• Full compliance EMI Reciever according to standard CISPR 16-1· 1, ANSI C63.2, MIL->461, and DO·160
• Spectrum Analyzer
• Integrated LOW Noise Ampllfier (lNAI)
• Integrated Preselect1on
• Tradttional and FFT·based Mode
• Automatic Stepped Attenuator
• Ultra Low Noise Floor
• Excellent spurious Performance
• Real-time Spectrum Analyzer optional
• Vast IQ-Bandwidth

TDEMI Mobile+. The ultra mobile EMI receiver – Emission measurements everytime, everywhere. Fully stand-alone operable.

• Frequency Ranges 10Hz – 1GHz, 3GHz, 6GHz or 7GHz
• 16000x faster than conventional receivers
• Super compact design and 12V supply
• 225 MHz fully gapless real-time analysis bandwidth
• Weighted Real-time Spectrogram

Ultra High Performance RT Spectrum Analyzer. Ultrafast EMI Measurements.

• Frequency Range from 1 Hz up to 50 GHz
• 225 MHz Real-time analysis bandwidth
• 100 dB Dynamic Range
• Ultrahigh performance preselection in all modes
• Up to 510 MHz Real-time IQ-Analysis bandwidth
• Ultra High Performance Spectrum Analyzer

• High Power: Ranging from  750W to 15kW.
• User-Friendly: Easy connections via LAN (LXI 1.5), USB (2.0), RS-232/RS-485.
• Safe & Certified: CE/UKCA marked with built-in safety.
• Versatile: Ideal for various industries.
• Warranty: 5 years.

• Optional Interfaces: IEEE, EtherCAT, Modbus-TCP, Isolated Analog 4-20mA (IS420)
• Output Power Levels: 1kW to 15kW, low-noise performance
• Output Voltage/Current: Up to 1500V and 1500A
• AC Input Options: Single-phase and three-phase with Active Power Factor Correction
• Mechanical Options: Blank Front Panel, Air Filter Kits, Parallel Kits
• Certifications: CE/UKCA Marked, UL/cUL/IEC/EN 61010-1
• Warranty: 5 years

• High power density, lightweight, and portable
• Output power: 30kW, 45kW, 60kW; Output voltages: 10V to 600V
• Advanced features: Programmable V/I Slew-Rate, Constant-Power Limit, Arbitrary Waveform Generator
• Built-in interfaces: LAN (LXI 1.5), USB (2.0), RS-232/RS-485, Isolated Analog (5V/10V)
• Optional interfaces: IEEE, EtherCAT, Modbus-TCP, Isolated Analog 4-20mA
• CE and UKCA marked, worldwide safety approvals, 5-year warranty

• Compact, air-cooled OEM style
• Superior pulse repeatability
• Simple parallel operation for higher power
• Optional Active PFC (pf = 0.98)
• Full remote control interface
• High EMI-RFI immunity

• Reliable and Repeatable solid state signal generation
• Standard Internal/external pulse modulation
• USB/Ethernet Control
• 10 MHz external or internal reference
• 100 Hz Frequency Resolution
• Easily portable
• Sized to fit into a single rack unit for ATE applications

• Reliable and Repeatable solid state digital attenuation
• Includes GUI, Windows and Linux SDK, LabVIEW driver
• Programmable attenuation ramp and fading profiles
• Operate multiple devices directly from a PC or self-powered hub
• Easily portable USB powered device
• USB and Ethernet control interfaces