Products

The ECO-710E/810E ThermoStream® systems are eco-friendly temperature forcing solutions designed for precise electronic testing, delivering fast temperature transitions with quiet, energy-efficient operation.

Key Features:

• Wide temperature range: -80°C to +225°C
• Eco-friendly design compliant with EU 517/2014 (no annual leak testing)
• Quiet operation at just 56 dBA
• Energy-efficient performance on a 20-amp circuit
• Rapid temperature transitions for consistent results
• Touchscreen controls with embedded software (no Windows® OS)
• No need for LN2 or LCO2 cooling agents
• Remote setup and communication capabilities
• Ideal for 24/7/365 lab or production use

The EME Wide is a professional wideband field meter designed to monitor and record electromagnetic field (EMF) exposure with accuracy and reliability.

Key Features:

• Frequency range: 0.1 MHz – 6.5 GHz
• Tri-axial probe ensures maximum isotropy in measurements
• Measures isotropic and single-axis (X, Y, Z) field values
• Supports RMS, maximum, and time/spatial averaging
• Selectable units: V/m, A/m, W/m²
• Built-in alarm with programmable thresholds
• Large 2.8” LCD display with LED backlight
• Stores up to 20,000 measurement points in non-volatile memory
• Rechargeable AA NiMH battery with external wall charger
• Compliance with 2013/35/EU Directive, ICNIRP, FCC 96-326, and Safety Code 6

• Three or four high performance outputs each with full functionality
• Range switching gives variable voltage/current combinations
• Shared power mode provides double power from a single output
• Low output noise and ripple via linear final regulation
• High setting resolution of up to 1mV and 0.1mA
• Variable OVP and OCP trips on all outputs which can be linked (MX-Q Series 2 units only)
• Individual or combined output on/off control with programmable delay sequencing.
• Selectable voltage tracking (isolated tracking)
• Selectable current meter averaging
• Switchable remote sense capability
• Graphic LCD (colour on Series 2) provides simultaneous output metering
• Numeric or spin-wheel control of all parameters
• 50 setting memories per output plus 50 linked memories
• 3U rack case for bench or rack mounting (4U rack kit accessory available)
• RS-232, USB and LAN (LXI) interfaces (P models)
• GPIB option (P models only)
• Duplicate power & sense terminals at rear (P models)
• Software control from Test Bridge software (free download – P models only)

Series 2 (“S2”) models add:

• Colour display
• Enhanced channel power sharing
• ‘TripLink’ feature: Link channels to trip together on OVP or OCP
• New MX103Q SELV Model

The Aim-TTi PL Series DC Power Supply combines precision, flexibility, and reliability in a compact linear regulated design. Available in single, dual, and triple output configurations, it delivers exceptional control and accuracy for laboratory, R&D, and testing environments.

Key Features:

• Single, dual, or triple output models
• Voltage range from 6V/8A to 60V/1.5A
• High-performance linear regulation for low noise
• Compact and space-saving design
• True analog controls for smooth operation
• S-Lock function to instantly lock settings
• V-Span feature to customize voltage range
• Low current measurement and meter averaging
• Selectable remote sense terminals
• Independent, Isolated Tracking, and True Parallel modes
• High current, low voltage output on triple models
• Optional interfaces: RS-232, USB, LAN (LXI), and GPIB
• Analog remote control of voltage and current (single output only)

Experience precision RF signal analysis on the go with this lightweight, handheld analyzer designed for both lab and field use.

Key Features:

• Frequency range: 1MHz to 1.3GHz (PSA1303) or 2.7GHz (PSA2703)
• RBW: 300Hz to 10MHz
• -115dBm typical noise floor
• Dual markers with absolute/difference values
• AM/FM demodulation in zero span
• Auto-find & smart marker peak tracking
• USB for waveform saving and PC connection
• Live, View, and Reference trace modes
• 6-hour lithium-ion battery operation
• Weighs just 0.58 kg
• Optional U01 Upgrade: Limit lines, data logging, triggering, compensation tables

High-performance, battery-powered spectrum analyzers ideal for RF engineers and field use.

Key Features:

• Frequency range: 10MHz to 3.6GHz or 6.0GHz
• -120dBm typical noise floor
• Resolution bandwidths from 300Hz to 10MHz
• AM/FM audio demodulation with zero span
• Live, View & Reference traces with markers
• Smart marker tracking with peak detection
• USB data logging & real-time PC view
• Compact, lightweight (0.56 kg) with >3hr battery
• Optional U02 features: limit lines, OBW, ACPR, AM/FM waveform demodulation

• Wide range of voltage/current combinations
• Up to 80V and up to 50A within the same power envelope
• Low output ripple and noise of <3mV rms at full power
• High setting resolution of 1mV
• Analogue control interfaces for voltage and current
• Bench or rack mounting, front and rear terminals
• USB and LAN (LXI) interfaces with GPIB optional (QPX600DP, QPX1200SP and QPX750SP)

RapidTemp™ BT28 ThermoStream® Benchtop Thermal Test System

Key Features:

• Compact and lightweight design under 80 lbs (38 kg) for easy benchtop integration
• Wide temperature range from -28°C to +225°C for versatile testing
• High airflow capacity of 14 scfm for precise and reliable temperature forcing
• SwiftTherm™ technology for ultra-fast temperature transitions
• Detachable 9 ft. touchscreen interface for flexible operation
• ECO-Stream design: quieter, smaller, and energy-efficient
• Embedded control system with Ethernet, IEEE-488, RS232, and USB connectivity
• Customizable test setups with data logging via USB storage

A high-purity 20MHz DDS function generator designed for engineers requiring precision signal output, advanced modulation, and digital control.

Key Features:

• Frequency range: 0.001Hz to 20MHz
• High resolution: 6 digits or 1mHz
• Excellent stability (1ppm) and 10ppm one-year accuracy
• Digital control for phase-continuous sweep (linear or logarithmic)
• Output range: 5mV to 20V peak-to-peak from 50 or 600 Ohms
• Low distortion sine wave with high spectral purity
• Built-in modulation: AM, FSK, gated mode, tone switching
• Store and recall multiple instrument setups
• USB and RS232 interfaces for remote control

High-performance dual-channel function and arbitrary waveform generator with up to 240 MHz output for advanced test and signal needs.

Key Features:

• Frequency range from 40 MHz to 240 MHz
• Dual independent or coupled full-performance channels
• Precise phase control: 0.001° resolution
• Arbitrary waveform support up to 800 MS/s
• Replay rates up to 80 MHz
• Wide range of built-in and user-defined waveforms
• Pulse generation up to 100 MHz, low jitter
• Internal/external modulation, sweep, gated, and burst modes
• USB, LAN (LXI compliant), and optional GPIB
• PC software for waveform generation and editing

The Aim-TTi TGP3100 Series Pulse and Universal Generator combines digital precision with high-speed performance for advanced signal generation. Ideal for R&D, test automation, and education, it delivers superior waveform quality, flexibility, and ease of use.

Key Features:

• Frequency range up to 25MHz or 50MHz
• Pulse, double pulse, PRBS, and arbitrary waveform generation
• 5ns to 800s adjustable rise and fall times
• Pulse period, width, and delay resolution down to 100ps
• High drive output up to 20V pk-pk into 50Ω
• Noise generator function with user-defined distribution
• AM, FM, PM, FSK, BPSK, PWM, and PDM modulation options
• Sine wave generation up to 50MHz
• 16-bit vertical resolution, 800MS/s sampling rate
• Front USB port for waveform storage
• USB, LAN (LXI), and optional GPIB interfaces

The Aim-TTi TGR205x RF Signal Generator combines precision, performance, and flexibility for modern RF applications. Available in 1.5GHz (TGR2051) and 3GHz (TGR2053) models, it delivers exceptional accuracy, stability, and modulation capability—all within an intuitive, compact design.

Key Features:

• Frequency range: 150 kHz to 1.5/3 GHz
• High signal purity: phase noise < -117 dBc/Hz at 1 GHz
• Output amplitude: -127 dBm to +13 dBm, 0.1 dBm resolution
• 1 ppm frequency accuracy with low drift
• Internal/external AM, FM, PM modulations
• Digital modulations: ASK, FSK, PSK, OOK, MSK, GMSK, 3FSK, 4FSK, HMSK
• Fast amplitude and frequency sweeps with 5 ms settling time
• Internal waveform generator: sine, square, ramp, triangle, PRBS, and custom patterns
• Simple color touch screen operation
• Remote programming via USB, LAN (LXI), and optional GPIB

Key Features:

• Wide temperature range from -65°C to +300°C
• Compatible with 150mm, 200mm, and 300mm wafer sizes
• Options for mechanical refrigeration, glycol/water, or air cooling
• Heating methods: ThermoElectric or Resistive, depending on model
• Retrofits available for existing probe stations
• Customizable surface plating: gold or nickel
• Supports advanced applications like low leakage probing (fA level) and high-voltage probing (up to 10kV)

ThermoSpot Systems – Benchtop Direct Contact Cooling and Heating Solution

The Temptronic® ThermoSpot® delivers high-performance temperature control for IC testing and high-Watt devices with unmatched cooling capacity.

Key Features:

• Reliable thermal cycling without thermoelectric modules
• Wide temperature range: -65°C to +175°C
• Cooling power: 40W at -40°C, 55W at -55°C, 120W at -40°C
• Fast transitions: <35 seconds from +25°C to -40°C
• Secure thermal contact with ThermoBridge™ design
• Touch-screen with data logging and programmable settings
• Multiple communication ports: Ethernet, USB, IEEE, RS232

ThermoSpot® Systems – Direct Contact Thermal Test Solutions

Key Features:

• Temperature range: -65°C to +175°C
• Cooling power up to 120W at -40°C
• Fast transition rate (<35 sec from +25°C to -40°C)
• Reliable thermal cycling without thermoelectric modules
• Flexible thermal probe with interchangeable ThermoBridge™
• Touchscreen controller with programmable profiles
• Connectivity options: Ethernet, USB, IEEE, RS232
• Easy, secure connection to in-circuit or socketed DUTs

Key Features:

• Single output up to 360W: Choose between 18V/20A or 35V/10A
• Mixed-mode regulation for high accuracy and low noise
• Fanless convection cooling for completely silent operation
• Bench or rack mountable, front and rear terminals
• OVP trip, high-resolution settings, and remote sense terminals
• P models offer USB, RS232, LAN interfaces (GPIB optional)
• Rotary, keypad, and step control for voltage and current
• Non-volatile memory for storing up to 25 user presets
• Seamless integration with Test Bridge software and automation systems