Products

T3PS Series – Power Supplies by Teledyne Test Tools deliver precision, flexibility, and control in a compact form for both lab and industrial use.

Key Features:

• Programmable and non-programmable options with up to 4 independent outputs
• Wide voltage and current ranges up to 60 V / 200 A / 1520 W
• Multiple display types: TFT LCD, dual numeric, high-resolution panels
• Output modes: Constant Voltage (CV), Constant Current (CC), Constant Resistance (CR)
• Low ripple and fast transient response: ≤1 mVrms, ≤50 µs
• Built-in series/parallel tracking, electronic load modes, and remote sense terminals
• Interfaces: USB, LAN, RS-232, RS-485, Analog Control, Ext I/O
• Advanced features: OVP, OCP, UVL, programmable slew rates, panel lock
• Ideal for use in automotive, mobile, defense, research labs, and education

The Teledyne T3SA Series Spectrum Analyzers deliver high-performance signal analysis from 9 kHz to 3.2 GHz in a compact, easy-to-use design. Ideal for R&D, education, production, and pre-compliance testing, it features a large touchscreen and advanced digital IF technology.

Key Features:

• All Digital IF technology10.1”
• WVGA (1024 x 600) touchscreen display
• Frequency range from 9 kHz to 3.2 GHz
• -161 dBm/Hz displayed average noise level (typical)
• -98 dBc/Hz @ 10 kHz offset phase noise (typical)
• Total amplitude accuracy < 0.7 dB
• 1 Hz minimum resolution bandwidth (RBW)
• Built-in preamplifier for improved sensitivity

Typical Applications

● Research Laboratory
● Development Laboratory
● Repair and Maintenance
● Calibration Laboratory
● Automatic Production Test
● General bench-top use

Teledyne Test Tools T3DAQ1-16 is a powerful 16-channel Data Acquisition Unit, perfect for R&D and production testing environments.

Key Features:

• 16-channel input (12 multi-purpose + 4 current)
• Built on a 6½ digit digital multimeter platform
• Wide range of electrical measurements: voltage, current, resistance, capacitance, frequency
• True-RMS accuracy for AC voltage and current
• Large 4.3″ TFT LCD with dual-display views
• Display modes: Histogram, Trend, Bar Graph, Statistics, or Number
• USB Host, USB Device, and LAN connectivity
• Cold terminal thermocouple compensation
• Softkey interface for intuitive navigation

A high-performance 20MHz DDS function generator offering precise waveform control, high spectral purity, and flexible remote interfacing.

Key Features:

• Frequency range: 0.001Hz to 20MHz
• High resolution: 6 digits or 1mHz
• Frequency stability: ±1ppm, accuracy: ±10ppm
• Ultra-low distortion sine waves with high spectral purity
• Internal linear/log sweep with phase continuity
• Built-in AM, FSK, gated, and tone-switching modes
• Output: 5mV to 20V pk-pk from 50Ω or 600Ω
• Store and recall multiple instrument set-ups
• USB and RS232 interfaces for remote programming

A high-purity 20MHz DDS function generator designed for engineers requiring precision signal output, advanced modulation, and digital control.

Key Features:

• Frequency range: 0.001Hz to 20MHz
• High resolution: 6 digits or 1mHz
• Excellent stability (1ppm) and 10ppm one-year accuracy
• Digital control for phase-continuous sweep (linear or logarithmic)
• Output range: 5mV to 20V peak-to-peak from 50 or 600 Ohms
• Low distortion sine wave with high spectral purity
• Built-in modulation: AM, FSK, gated mode, tone switching
• Store and recall multiple instrument setups
• USB and RS232 interfaces for remote control

High-performance dual-channel function and arbitrary waveform generator with up to 240 MHz output for advanced test and signal needs.

Key Features:

• Frequency range from 40 MHz to 240 MHz
• Dual independent or coupled full-performance channels
• Precise phase control: 0.001° resolution
• Arbitrary waveform support up to 800 MS/s
• Replay rates up to 80 MHz
• Wide range of built-in and user-defined waveforms
• Pulse generation up to 100 MHz, low jitter
• Internal/external modulation, sweep, gated, and burst modes
• USB, LAN (LXI compliant), and optional GPIB
• PC software for waveform generation and editing

Key Features:

• Single output up to 360W: Choose between 18V/20A or 35V/10A
• Mixed-mode regulation for high accuracy and low noise
• Fanless convection cooling for completely silent operation
• Bench or rack mountable, front and rear terminals
• OVP trip, high-resolution settings, and remote sense terminals
• P models offer USB, RS232, LAN interfaces (GPIB optional)
• Rotary, keypad, and step control for voltage and current
• Non-volatile memory for storing up to 25 user presets
• Seamless integration with Test Bridge software and automation systems

The T3VNA Series from Teledyne Test Tools is a powerful, compact solution for engineers who demand precision and versatility in RF and spectrum analysis.

Key Features:

• Vector Network Analysis from 10 MHz to 3.2 GHz
• Spectrum Analysis from 9 kHz to 3.2 GHz
• All-digital IF technology for clean signal processing
• Built-in tracking generator (up to 1.5 GHz)
• Advanced features like Distance-to-Fault, OBW, ACPR
• -156 dBm/Hz typical displayed average noise level
• -98 dBc/Hz @ 10 kHz offset phase noise
• 1 Hz minimum RBW for high-resolution measurements
• 10.1″ WVGA display for smooth operation
• High accuracy with <1.2 dB amplitude error

HDO4000A oscilloscopes have 4 analog input channels, 12-bit resolution using Teledyne LeCroy’s HD4096 high-definition technology, up to 1 GHz of bandwidth and a compact form factor with a large 12.1” multi-touch display. They are ideal for debug and troubleshooting of power electronics designs, digital power management or power integrity analysis, automotive electronics systems, and deeply embedded or mechatronic designs.

The WaveSurfer 3000z has a 10.1″ capacitive touch display, the longest memory, and the deepest toolbox – all at an affordable price.

• HD4096 technology provides 12-bit resolution all the time
• 2ProBus input supports over 30 probes in 9 product categories
• 3Long record capture of up to 25 Mpts
• 412.1” 1280 x 800 HD capacitive touchscreen
• 5Mixed-signal capability – debug complex embedded designs with integrated 16-channel mixed signal option
• 6Easy connectivity with 2 USB 3.1 ports
• 7MAUI with OneTouch user interface for intuitive and efficient operation

• 15.6″ 1920 x 1080 capacitive touchscreen display
• 24 analog input channels
• 3ProBus input supports every Teledyne LeCroy probe
• 4MAUI with OneTouch user interface for intuitive and efficient operation
• 5Q-Scape multi-tab display architecture
• 6Up to 250 Mpts of acquisition memory
• 7HD4096 technology – 12 bits all the time
• 8Buttons/indicators color-coded to associated waveform on display
• 9Use cursors and adjust settings without opening a menu
• 10Mixed Signal capability with 16 integrated digital channels
• 116 USB 3.1 ports (2 front, 4 side)

• HD4096 technology provides 12-bit resolution up to 8 GHz and 20 GS/s
• Up to 5 Gpts of acquisition memory enables detailed viewing of long events
• 15.6” 1900 x 1080 Full HD capacitive touchscreen
• ProBus2 input supports up to 8 GHz bandwidth while maintaining support for legacy ProBus probes
• MAUI with OneTouch user interface for intuitive and efficient operation
• Waveform Control Knobs – Control channel, zoom, math and memory traces with the multiplexed vertical and horizontal knobs
• Color-coded panel indicators – Trigger, horizontal and vertical indicator colors correspond to the associated waveform on the display
• Cursor/Adjust Knobs – Enable and position cursors or adjust settings and parameters without opening a menu
• Mixed Signal Capability – Debug complex embedded designs with integrated 16-channel mixed signal capability
• Easy connectivity with seven USB 3.1 ports (3 front, 4 side) and UHD (4k) HDMI and DisplayPort outputs

• Eye diagram (a), eye mask failure (b) and IsoBER eye opening analysis (c)
• Jitter spectrum (a) with noise floor display (b) and inverse FFT of the periodic jitter (c)
• Data dependent jitter (DDj) plot for each bit in synch with pattern (a) and with histogram (b)
• Time interval error (TIE) jitter track analysis
• Jitter histograms (a) with bathtub curves (b) and CDF plot (c)
• Intersymbol interference (ISI) plots pinpoint bit sequences that have high ISI and are sources of bit errors
• Jitter measurements table with full details for one or more “lanes” plus reference

• 15.6” 1920 x 1080 capacitive touchscreen display
• 8 analog input channels
• ProBus input supports every Teledyne LeCroy probe
• MAUI with OneTouch user interface for intuitive and efficient operation
• Q-Scape multi-tab display architecture
• Up to 5 Gpts of acquisition memory
• HD4096 technology – 12 bits all the time
• Buttons/indicators color-coded to associated waveform on display
• Use cursors and adjust settings without opening a menu
• Mixed Signal capability with 16 integrated digital channels
• 6 USB 3.1 ports (2 front, 4 side)
• HDMI and DisplayPort – supports 4K (4096 x 2304) external monitor
• Removable SSD (standard)
• View 16 channels on one display with OscilloSYNC
• Reference Clock Input/Output for connecting to other equipment
• USBTMC over USB 3.1 for fast data offload

• S-parameters DC to 40 GHz, single-ended and mixed-mode
• Impedance Profile with <1 mm resolution, differential and common-mode
• Internal, automatic OSLT calibration
• USB-connected, small, lightweight
• Flexible display of the measurements
• Remove effects from fixtures, connectors and cables
• Emulate eye diagrams with CTLE, DFE and FFE equalization
• Advanced jitter analysis