Products

The Tabor A10150 Signal Amplifier is a compact, high-speed amplifier designed to enhance any signal source. With 150MHz bandwidth and up to 20Vp-p output into 50Ω, it provides clean, low-distortion amplification. Its ultra-fast transition time of under 1.8ns ensures precise waveform fidelity, making it ideal for Ethernet testing, ASIC, FPGA, and DAC characterization. The A10150 can be used as a standalone amplifier or as a “Snap-On” accessory for Tabor WaveXciter and WS8351/2 models, extending signal voltage without compromising integrity.

Key Features

• Single-channel, DC-coupled wideband amplifier
• High bandwidth of 150MHz for fast signal response
• Maximum output up to 20Vp-p into 50Ω load
• Ultra-fast transition time: <1.8ns for precise waveform edges
• Compact, all-metal footprint for easy integration
• Low distortion ensures clean signal amplification
• Custom gain options: x5 standard, x10 optional
• Compatible with Tabor WaveXciter and WS8351/2 series
• Suitable for Ethernet, FPGA, ASIC, and DAC testing

The Tabor A10160 Signal Amplifier is a compact, high-current amplifier designed to boost any signal source with precision. Offering 45MHz bandwidth, up to 34Vp-p output into 50Ω, and 10W peak power, it ensures clean, low-distortion signals. Its ultra-fast transition time of under 10ns delivers sharp waveform edges, making it ideal for piezo-electronics, transducer testing, MEMS, and general high-speed electronic applications. The A10160 can operate as a standalone amplifier or as a “Snap-On” accessory for Tabor WaveXciter and WS8351/2 series, providing flexible, cost-effective power enhancement.

Key Features

• Single-channel, DC-coupled wideband amplifier
• 45MHz high-speed bandwidth for fast signal response
• Maximum output of 34Vp-p into 50Ω
• High output current drive up to 1A
• Peak power up to 10W, continuous power 7.5W
• Ultra-fast transition time: <10ns
• Compact, all-metal footprint for lab and bench setups
• Low distortion for precise signal amplification
• Custom gain options: x10 standard, x15 or x20 optional
• Compatible with Tabor WaveXciter and WS8351/2 series

The A10200 RF Signal Amplifier from Tabor Electronics is a high-power, ultra-wideband amplifier designed for demanding high-frequency applications. Compact and versatile, it extends the output power of any signal source up to +28dBm across 100 kHz to 20 GHz, providing a reliable solution for RF testing, multi-tone experiments, and advanced electronics applications.

Key Features

• Ultra-wideband frequency range: 100 kHz to 20 GHz
• High output power: +28dBm typical at P1dB
• Reverse polarity and over/under voltage protection
• Compact, lightweight design with dedicated power supply
• Ideal for high-frequency RF and signal testing
• Compatible with Tabor Lucid series generators or any signal source
• Maintains signal integrity across full bandwidth
• Cost-effective, versatile solution for laboratory and field applications

AIM-TTi 1908 Series – 5.5 Digit Dual Display Multimeter
High-performance, bench-top or portable multimeter for professional-grade precision and versatility.

Key Features:

• 5.5-digit resolution with dual display
• True RMS AC + frequency, capacitance & temperature measurements
• Dual measurement capability for parallel data monitoring
• USB standard (1908); USB, RS232, LAN/LXI on 1908P
• Optional GPIB interface (1908P)
• Powered by AC mains or internal rechargeable batteries
• High accuracy up to 0.02%, resolution down to 1µV and 0.1µA
• Ideal for both laboratory and field applications
• PC-Link software included for remote control and data logging

A precision AC power supply designed for EMC testing, pre-compliance setups, and product development labs.

Key Features:

• 1000W power output at 230V
• Low harmonic distortion for clean AC testing
• Delivers up to 4.4A RMS and 10A peak currents
• EN61000–3–2 compliant for harmonic emissions
• Available with UK, Schuko, or USA sockets
• Comprehensive built-in overload protection
• Simple connection via standard power connectors

Reliable, flexible, and programmable power delivery for bench, system, and ATE applications.

Key Features:

• PowerFlex technology for variable V/A within power limits
• Up to 60V and 20A, 180W or 420W per output
• Dual or single isolated outputs
• CV or CC operation with settings lock (S-Lock)
• Selectable OVP trips and remote sense terminals
• RS232, USB, LAN/LXI standard on P models
• GPIB available as option (P models only)
• Compact, rugged 3U quarter or half rack design
• Analog remote control (CPX400SA model)

Compact and quiet bench power supply with precision linear regulation and a range of output options for lab or system use.

Key Features:

• Linear regulated bench DC power supply
• Single, dual, and triple output options
• Up to 56V and 5A with up to 130W output
• 4-digit voltage and current display per output
• Constant voltage or constant current operation
• Switchable local/remote sensing
• Silent, fan-free convection cooling
• Compact design saves bench space
• Optional RS232 or USB interfaces (on select models)
• Auxiliary output (1.5–5V/2A) on EL302RT

A versatile bench power supply series with mixed-mode regulation, ideal for lab or system environments.

Key Features:

• Single, dual, or triple outputs with up to 420W power
• Output ranges: 18V/10A, 20V/20A, 35V/5A, 42V/10A
• Dual model: 2×35V/4A or 150V/2A (combined)
• Triple model includes 1.5–5V/5A auxiliary output
• Independent 4-digit meters for each output
• Local or remote sensing with constant V or I modes
• Silent, fan-free operation for most models
• Compact, space-saving design
• RS232 or USB interfaces on select models

Compact, versatile, and efficient, the FX Series is ideal for test labs, R&D, and educational use.

Key Features:

• PowerFlex autoranging outputs (up to 105W per channel)
• Dual or triple output models (210W or 246W total)
• SELV compliant and high safety design
• Rotary, touch, and USB control options
• Low ripple noise (<2mV), high resolution (1mV/1mA)
• Voltage tracking and simultaneous V/I control
• Remote USB interface with SCPI protocol
• 25 user-defined memory presets
• Switchable remote sense & intelligent cooling
• Includes Test Bridge software for logging & automation

• Current measurement from insulated probing of conductor
• Suitable for observation and measurement of current in PCB tracks, component leads and ground planes
• Wide dynamic range of 10mA to 20A peak to peak
• Wide bandwidth of DC to 5MHz
• Low noise figure equivalent to <6mA rms at full B/W
• Safety rated to 300V Cat II (600V Cat 1)
• Suitable for connection to any oscilloscope
• High accuracy general purpose H-field probe
• Converts to ‘closed magnetic circuit’ current probe

The Aim-TTi LCR400 Precision LCR Meter delivers high-accuracy component testing in a compact, user-friendly design. With 0.1% basic accuracy and built-in comparator functions, it’s ideal for precision component measurement and quality control.

Key Features:

• 0.1% basic measurement accuracy for reliable results
• Automatic component recognition for ease of operation
• Dual 5-digit high-brightness displays for clear readings
• Built-in 4-terminal component fixture for stable connections
• Limits comparator with 8 Pass bins and 2 Fail bins
• Three selectable test frequencies with switchable bias
• RS232 standard interface for PC connectivity
• Optional SMD tweezers, Kelvin clips, and PC logging software

The Aim-TTi LD400 Series DC Electronic Load is a versatile and high-performance solution for testing DC power supplies, batteries, and converters. With precise control, multiple operating modes, and advanced transient testing, it ensures dependable and accurate performance for laboratory and production environments.

Key Features:

• Wide operating range: 0–80V and 0–80A
• 400W continuous and 600W short-term power dissipation
• Multiple modes: constant current, voltage, resistance, conductance, and power
• Operates at <1V for high-current testing up to 40A
• Built-in transient generator with variable slew rate
• High accuracy with fine-level setting resolution
• Variable drop-out voltage for battery discharge testing
• Graphical LCD with intuitive soft-key control
• Analog and TTL remote control functions
• USB, RS232, and LAN (LXI) interfaces; optional GPIB (LD400P)
• Front and rear input terminals for flexible connections

The Aim-TTi LDH400 Series DC Electronic Load offers a powerful and precise solution for direct testing of DC power sources, converters, and PFCs. Designed for high-voltage applications, it combines advanced features, intuitive control, and reliable performance in a compact form factor.

Key Features:

• Wide voltage range: 10V to 500V and current up to 16A
• 400W continuous power dissipation at 28°C (360W at 40°C)
• Operates in constant current, resistance, conductance, and power modes
• High accuracy and resolution for precise level settings
• Built-in transient generator with adjustable slew rates
• Variable drop-out voltage ideal for battery and power testing
• Graphical LCD with easy soft-key interface
• Front and rear input terminals for flexible connectivity
• Remote control via USB, RS232, and LXI-compliant LAN
• Optional GPIB interface available
• Rated to CAT II (300V) safety standards

The LS1291B Signal Generator is a high-performance 12 GHz single channel RF analog signal generator from Tabor Electronics’ Lucid series. Designed for engineers and test teams, it delivers fast frequency switching, versatile modulation, and exceptional signal purity in a compact modular platform.

Key Features

• Frequency range up to 12 GHz
• Single channel RF output for microwave testing
• Fast frequency switching under 100 µs
• AM, FM, PM, Sweep, and Pulse modulation
• Low phase noise of -138 dBc/Hz at 1 GHz and 10 kHz offset
• SCPI and VISA control via LAN or USB
• Compact modular form factor for desktop, benchtop, and rackmount use
• Ideal for radar systems, communications, and automated test environments

The LS1291D RF Signal Generator is a high-precision 12GHz modular analog signal generator, designed for fast, accurate, and reliable RF measurements. Its compact platform combines ultra-fast frequency switching, low phase noise, and versatile modulation options, making it ideal for lab, production, and field testing applications.

Key Features

• Frequency range up to 12GHz
• Ultra-fast frequency switching <100µs
• Supports AM, FM, PM, Sweep, and Pulse modulation
• Exceptional signal integrity with -138 dBc/Hz phase noise at 1GHz
• Compact modular form factor for Desktop, Benchtop, Rackmount, or Portable use
• Supports SCPI and VISA for remote control
• Interfaces: LAN, USB, and SPI for versatile integration
• Ideal for RF testing, radar systems, communication testing, and high-precision measurements

The LS1291P Portable Signal Generator from Tabor Electronics’ Lucid series is a high-performance 12GHz microwave signal generator in a compact and portable form factor. It combines fast frequency switching, versatile modulation options, and superior signal purity for advanced RF and microwave applications.

Key Features

• Frequency range up to 12GHz
• Fast frequency switching <100µs
• Supports AM, FM, PM, Sweep, and Pulse modulation
• Phase noise: -138 dBc/Hz @1 GHz, 10 kHz offset
• Compact, portable, and modular design
• Multiple interfaces: USB, LAN
• Ideal for radar testing, field RF measurements, and secure communication applications