1 800 665 7301 | info@tmetrix.com

  • Teledyne Test Tools Digital Power Meters provide reliable, high-precision AC and DC power measurements in a compact design. Ideal for R&D, QA, and compliance testing.

    Key Features:

    • Bandwidth: DC, 0.1 Hz to 100 kHz
    • High-resolution 4″ and 5″ TFT LCD displays
    • 19 power measurement parameters
    • 16-bit ADC and 300 kHz sampling rate (T3PM1100)
    • Waveform, harmonic, and integration functions
    • External current sensor input (T3PM1100)
    • Supports IEC 62301 and IEC 61000-4-7 standards
    • Interfaces: USB, LAN, RS-232C
    • Front/rear terminal inputs for flexible testing

     

  • HDA125 High-Speed Digital Analyzer brings advanced logic analysis capabilities to your existing Teledyne LeCroy oscilloscopes. Compact, accurate, and versatile.

    Key Features:

    • 12.5 GS/s sample rate for high-speed digital capture
    • Supports up to 18 digital channels
    • Compatible with WaveMaster/SDA 8 Zi-B and LabMaster 10Zi-A oscilloscopes
    • QuickLink Probe System for fast, low-impact signal access
    • 3 GHz bandwidth and 80 ps timing accuracy
    • Command bus decoding for in-depth DDR/LPDDR memory debugging
    • Minimal signal loading with 110 kΩ, 0.12 pF tip impedance
    • Cost-effective QuickLink solder-in tips simplify multi-point testing
    • Ideal for mixed-signal, high-speed, and memory interface debugging
  • Teledyne Test Tools LCR Meters offer precision testing in a compact form, perfect for R&D labs and production lines.

    Key Features:

    • 3.5” high-resolution color LCD display
    • Test frequency up to 300 kHz with continuous output
    • 0.05% basic measurement accuracy
    • Spot or full frequency range with OPEN/SHORT correction
    • Automatic Level Control (ALC) for consistent voltage on components like MLCCs
    • Measure up to 4 parameters simultaneously
    • DCR measurement & built-in ±2.5 V DC bias
    • PASS/FAIL indicator and 10-bin sorting function
    • List measurement for automated test sweeps (up to 10 points)
    • Interfaces: RS-232C, USB, handler, and USB storage
    • Compact 2U, 1/2 rack size for automated test setups
  • Teledyne Test Tools Milli Ohm Meter offers high-precision low-resistance measurement with advanced drive modes, temperature compensation, and fast sampling.

    Key Features:

    • 50,000-count high-resolution display
    • 3.5″ TFT LCD (320×240)
    • 0.05% measurement accuracy
    • 1 Amp test current with 0.1 μΩ resolution
    • Fast 60 readings per second
    • Four-wire measurement method
    • Temperature compensation and delayed measurement
    • 20-panel memory settings
    • Dry circuit testing (T3MIL50X only)
    • USB, RS-232C, and EXT I/O interfaces
    • Multiple drive modes: DC+, DC-, Pulsed, PWM (T3MIL50X)

     

  • T3AFG Series – Waveform Generators from Teledyne Test Tools combine precision, speed, and flexibility with advanced DDS technology for high-quality signal generation.

    Key Features:

    • Models available with 30 MHz to 500 MHz bandwidth
    • Dual-channel output with 20 Vpp amplitude
    • Max sampling rate up to 2.4 GSa/s
    • 14-bit or 16-bit vertical resolution (model-dependent)
    • 4.3″ responsive touchscreen display
    • 196 built-in arbitrary waveforms
    • Supports AM, FM, PM, PSK, FSK, ASK, PWM, Sweep, Burst, Harmonic
    • USB Host, USB Device, LAN VXI-11 standard interfaces
    • Optional IQ modulation support (on high-end models)
    • True waveform combination and flexible phase/channel control
  • T3AWG3K Series – Waveform Generators deliver high-definition, multi-channel precision for engineers who demand signal quality, flexibility, and performance.

    Key Features:

    • Models available with 250 MHz or 350 MHz sinewave frequency
    • 2, 4, and 8 analog channel configurations
    • 16-bit vertical resolution for high signal fidelity
    • Max sampling rate of 1.2 GS/s
    • Output voltage window up to ±24 V (into High Impedance)
    • 128 Mpts/channel memory (upgradeable to 1 Gpts/channel)
    • True Arbitrary Mode and Direct Digital Synthesis (DDS)
    • Add 8, 16, or 32 digital patterns synchronized with analog output
    • Ideal for mixed-signal testing, high-voltage waveform generation, and multi-domain R&D
  • T3AWG6K Series – Waveform Generators combine precision, flexibility, and speed for advanced signal generation in R&D and automated test environments.

    Key Features:

    • Available in 2, 4, or 8 analog channel configurations
    • Up to 12.32 GS/s sampling rate (RF mode)
    • 16-bit vertical resolution for high signal fidelity
    • 4 Gpts waveform memory per channel
    • Up to 32 synchronous digital channels
    • Built-in waveforms: sine, square, ramp, noise, gaussian, exponential, DC, and more
    • Advanced modulations: AM, FM, PM, PWM, FSK, PSK
    • Variable clock true-arbitrary technology up to 6.16 GS/s (12.32 GS/s in RF)
    • Digital I/Q modulation with 16-bit components
    • Multifunctional operation: waveform generator, pattern generator, modulator

     

  • T3DMM Series – Digital Multimeters deliver precision, speed, and display-rich features, ideal for professional labs, R&D, and production testing.

    Key Features:

    • Available in 4.5-digit (60,000 counts) and 6.5-digit (2,200,000 counts) models
    • True RMS AC voltage and current measurement
    • 4.3” TFT-LCD with 480×272 resolution
    • Multiple display modes: Number, Histogram, Trend Chart, Bar Meter, Statistics
    • Advanced math functions: Max, Min, Avg, Std Dev, dBm/dB, Relative, Pass/Fail
    • Supports remote operation via USB, LAN, SCPI commands
    • Built-in cold terminal thermocouple compensation
    • Wide range of measurements: Voltage, Current, Resistance, Capacitance, Frequency, Period, Temperature
    • Internal 1GB storage and USB host for external data access
    • User-friendly softkey interface and built-in help system
  • T3PS Series – Power Supplies by Teledyne Test Tools deliver precision, flexibility, and control in a compact form for both lab and industrial use.

    Key Features:

    • Programmable and non-programmable options with up to 4 independent outputs
    • Wide voltage and current ranges up to 60 V / 200 A / 1520 W
    • Multiple display types: TFT LCD, dual numeric, high-resolution panels
    • Output modes: Constant Voltage (CV), Constant Current (CC), Constant Resistance (CR)
    • Low ripple and fast transient response: ≤1 mVrms, ≤50 µs
    • Built-in series/parallel tracking, electronic load modes, and remote sense terminals
    • Interfaces: USB, LAN, RS-232, RS-485, Analog Control, Ext I/O
    • Advanced features: OVP, OCP, UVL, programmable slew rates, panel lock
    • Ideal for use in automotive, mobile, defense, research labs, and education
  • The Teledyne T3SA Series Spectrum Analyzers deliver high-performance signal analysis from 9 kHz to 3.2 GHz in a compact, easy-to-use design. Ideal for R&D, education, production, and pre-compliance testing, it features a large touchscreen and advanced digital IF technology.

    Key Features:

    • All Digital IF technology10.1”
    • WVGA (1024 x 600) touchscreen display
    • Frequency range from 9 kHz to 3.2 GHz
    • -161 dBm/Hz displayed average noise level (typical)
    • -98 dBc/Hz @ 10 kHz offset phase noise (typical)
    • Total amplitude accuracy < 0.7 dB
    • 1 Hz minimum resolution bandwidth (RBW)
    • Built-in preamplifier for improved sensitivity

    Typical Applications

    ● Research Laboratory
    ● Development Laboratory
    ● Repair and Maintenance
    ● Calibration Laboratory
    ● Automatic Production Test
    ● General bench-top use

  • Teledyne Test Tools T3DAQ1-16 is a powerful 16-channel Data Acquisition Unit, perfect for R&D and production testing environments.

    Key Features:

    • 16-channel input (12 multi-purpose + 4 current)
    • Built on a 6½ digit digital multimeter platform
    • Wide range of electrical measurements: voltage, current, resistance, capacitance, frequency
    • True-RMS accuracy for AC voltage and current
    • Large 4.3″ TFT LCD with dual-display views
    • Display modes: Histogram, Trend, Bar Graph, Statistics, or Number
    • USB Host, USB Device, and LAN connectivity
    • Cold terminal thermocouple compensation
    • Softkey interface for intuitive navigation
  • The T3VNA Series from Teledyne Test Tools is a powerful, compact solution for engineers who demand precision and versatility in RF and spectrum analysis.

    Key Features:

    • Vector Network Analysis from 10 MHz to 3.2 GHz
    • Spectrum Analysis from 9 kHz to 3.2 GHz
    • All-digital IF technology for clean signal processing
    • Built-in tracking generator (up to 1.5 GHz)
    • Advanced features like Distance-to-Fault, OBW, ACPR
    • -156 dBm/Hz typical displayed average noise level
    • -98 dBc/Hz @ 10 kHz offset phase noise
    • 1 Hz minimum RBW for high-resolution measurements
    • 10.1″ WVGA display for smooth operation
    • High accuracy with <1.2 dB amplitude error
  • The EME Guard Plus is a lightweight and robust personal protection monitor designed to ensure the safety of workers operating near electromagnetic field (EMF) emitters such as antennas, radars, and base stations. With a frequency range of 1 MHz to 40 GHz, this device continuously monitors and records EMF exposure levels while providing immediate audio, visual, and vibrating alerts when exposure exceeds predefined safety thresholds. Customizable alarm settings and a triaxial isotropic probe ensure accurate and reliable measurements.

     

  • The EME Guard XS Radar is a state-of-the-art RF safety monitor, specifically designed for workers operating near radar transmitters and antennas. With its isotropic tri-axis E-field sensors, this compact device provides continuous EMF monitoring over a frequency range of 1 MHz to 40 GHz, including short pulsed signal detection. Equipped with audio and visual alarms, it alerts users instantly when EMF exposure exceeds predefined safety thresholds, creating a safer working environment for military, aviation, and telecom personnel.

     

  • Solutions For:

    •  Accurate measurement with tri-axis sensors
    • Instant audio and visual alarm
    • Robust, reliable and user-friendly
    • Covers 5G / 6G bands, measuring up to 71 GHz

    User profile:

    • Persons working near antennas including installation and maintenance workers, broadcast, PMR and mobile phone operators or regulatory body employees

    Measurement capabilities:

    • Continuous monitoring of Electromagnetic Field levels with isotropic tri-axis E-field sensors
    • EMF Level indicated by a LED color scale
    • Audio and visual alarms triggered when EMF exceeds the reference level
  • The EMI 64k software allows to embed the TDEMI systems in a fully automated test environment.

    • Full automation of EMI testing according to all commercial and military standards
    • Automated control of turntable, antenna and other equipment
    • Height and Angular Scan
    • Procedures according to standards as well as customized procedures
    • Reducing the cost for EMC and communication testing and certification by tailored packages