Products

• 3GHz RF analog signal generator
• AM, FM, PM, Sweep & Pulse Modulation
• Exceptionally Low Phase Noise of -145dBc/Hz @100MHz and 10@kHz offset
• Field ready, with 10” touch screen suited for day and night use and 2 hour battery operation
• Remotely programmable via MATLAB, Python, LabVIEW and other software programming environments.
• Removable uSD card for instrument security

• Customizable & savable test setups
• Program & Datalog Storage
• User Defined Temperature Limits
• Local & Remote Operations
• LabView™ drivers
• IEEE-488, RS232 ports

• 20 Amp Operation: Full performance with 20 amp service
• Automatic Power Reduction: Reduces power usage during idle periods
• Heat Only Mode: Reduces power usage when cold temperatures are not used
• WhisperStream Technology: quieter, smooth-sounding operation, 56 dBA
• Frost Free Test Environment: dry air purge for tester interface, prevents condensation:
  0.5 to 3scfm (0.25 to 1.5 l/s)
• Heated Defrost: quickly removes moisture buildup from internal chiller
• DUT Temperature Control : Proprietary control algorithm enables DUT temperature to be directly controlled
• Transition Rate*
  -55 to +125°C, approx. 10 seconds
  125 to -55°C, approx. 10 seconds
• System Airflow Output*
  4 to 18scfm (1.9 to 8.5 l/s) Continuous
• Temperature Range*
  -80 to +225°C (60Hz) No LN2 or LCO2 Required

• High reliability thermal cycling without thermoelectric modules
• Temperature range: -65 to 175°C
• Cooling power:
  • 40W at -40°C for lower power devices
  • 55W at -55°C and 120W at -40°C.
• Transition rate: up to <35 sec over 25 to -40°C
• Easy and secure thermal connection to in-circuit or test socked DUT
• Touch-screen controller: user-programmable temperatures, graphing, data logging
• Communications options: Ethernet, USB, IEEE, RS232

-60° to +200°C

• Economy model with high thermal capacity
• Precise temperatures with fast transitions from -60 to 200°C
• No annual leak testing required per EU 517/2014 F-Gas Regulation
• Effective testing and conditioning of electronic components, boards, and modules
• Available for 50 and 60Hz operation
• No need for Liquid Nitrogen (LN2) or Liquid Carbon Dioxide (LCO2)
• Remote communications and set up and touch screen operation
• User Defined Temperature Limits

• High voltage output to 300Vp-p (±150V)
• Output current to 150 mA
• Full power bandwidth from DC to >500kHz
• Slew rate to 200V/µs
• Low distortion
• Low cost
• Custom Configuration of gain and signal Ground

• Single channel
• High voltage output to 400Vp-p (±200V)
• Output current to 125 mA
• Full power bandwidth from DC to >500kHz
• Slew rate to 400V/µs
• Monitor Output
• Precise signal amplification for multiple applications
• Compatible with any of the Tabor waveform generators

• High voltage output to 300Vp-p (±150V)
• Output current to 100 mA per channel
• Full power bandwidth from DC to >500kHz
• Slew rate to 200V/µs
• Low distortion
• Low cost
• Custom Configuration of: Gain, Signal Ground

• 12GHz RF Analog Signal Generator
• Extremely fast switching speed of <100μs
• AM, FM, PM Sweep & Pulse Modulation
• Extra small, compact module platform
• Exceptionally Low Phase Noise of -145dBc/Hz @100MHz and 10@kHz offset
• SPI and micro-USB integrated interfaces
• Remotely programmable via MATLAB, Python, LabVIEW
• and other software programming environments.
• Flixible modular platform for OEM and custom requirements
• and applications, to satisfy specific customer demands.
• Multi instrument synchronization capability

• 3 GHz RF Analog Signal Generator
• Extremely fast switching speed of <100μs
• AM, FM, PM Sweep & Pulse Modulation
• Extra small, compact module platform
• Exceptionally Low Phase Noise of -145dBc/Hz @100MHz and 10@kHz offset
• SPI and micro-USB integrated interfaces
• Remotely programmable via MATLAB, Python, LabVIEW
• and other software programming environments.
• Flixible modular platform for OEM and custom requirements
• and applications, to satisfy specific customer demands.
• Multi instrument synchronization capability

• 6GHz RF Analog Signal Generator
• Extremely fast switching speed of <100μs
• AM, FM, PM Sweep & Pulse Modulation
• Extra small, compact module platform
• Exceptionally Low Phase Noise of -145dBc/Hz @100MHz and 10@kHz offset
• SPI and micro-USB integrated interfaces
• Remotely programmable via MATLAB, Python, LabVIEW
• and other software programming environments.
• Flixible modular platform for OEM and custom requirements
• and applications, to satisfy specific customer demands.
• Multi instrument synchronization capability

• Proven member of a modular Power Module family, more than 800 units are in service
• Precision-regulated Bi-Polar output provides up to +12 to -12 Amps for Magnet loads.
• Smooth operation through zero amps output current, no “Crossover” problems.
• All 2510 MCOR12 Power Modules are identical and interchangeable.
• Has two high-precision measurements of output current;
  • one is used to close the regulation control loop,
  • provides an independent monitoring signal to the Crate Interface Card.
• Fault sensing circuitry in the module sets a Fault Latch which inhibits the output.
• A (momentary) Sync input signal inhibits MOSFET switching when it is active (high);
  • this eliminate switching noise .
  • reduces power line noise during sensitive analog signal measurements.

• Proven member of a modular Power Module family, more than 800 units are in service
• Precision-regulated Bi-Polar output provides up to +30 to -30 Amps for Magnet loads.
• Smooth operation through zero amps output current, no “Crossover” problems.
• All 2510R30 MCOR30 Power Modules are identical and interchangeable
  • Programming Card is plugged into the replacement module.
• Each channel has a critically-damped, LC noise filter with a cut-off frequency of about 8 kHz.
• A 16-pin front panel diagnostics connector taps onto major circuit nodes which enables quick “inthe-crate” fault evaluation

• 2U Chassis – 19″ rack mount 3.48” Height, 9.60” Depth and Weight 6lb.
• Power 120V AC 60Hz
• Washable front removable air filter
• Ball Bearing AC fans provide 330 CFM
• Dual plenum design
• Cooling for 160mm,220mm depth modules
• Diverts lower warmed air to rear of Cabinet
• RM option diverts lower air to front of Cabinet

• accommodate these control schemes
• total control system interface on a single VME-standard card
• occupies the left-most slot of the crate
• monitoring voltage reference inputs, output voltages and fault conditions
• standard VMEbus-compatible 6U by 220 mm board installed
• Eurocard crate
• Two 96-pin I/O connectors

MCOR Modules

MCOR 2/6/9/12

Each module can be customized to provide maximum outputs of 2 amps, 6 amps, 9 amps, and 12 amps. Up to 16 of these can fit in a single 6U VME style crate.

MCOR 30

Each module can provide a maximum output 30 amps. Up to 8 of these can fit in a single 6U VME style crate.