1 800 665 7301 | info@tmetrix.com

  • HDA125 High-Speed Digital Analyzer brings advanced logic analysis capabilities to your existing Teledyne LeCroy oscilloscopes. Compact, accurate, and versatile.

    Key Features:

    • 12.5 GS/s sample rate for high-speed digital capture
    • Supports up to 18 digital channels
    • Compatible with WaveMaster/SDA 8 Zi-B and LabMaster 10Zi-A oscilloscopes
    • QuickLink Probe System for fast, low-impact signal access
    • 3 GHz bandwidth and 80 ps timing accuracy
    • Command bus decoding for in-depth DDR/LPDDR memory debugging
    • Minimal signal loading with 110 kΩ, 0.12 pF tip impedance
    • Cost-effective QuickLink solder-in tips simplify multi-point testing
    • Ideal for mixed-signal, high-speed, and memory interface debugging
  • The Teledyne T3SA Series Spectrum Analyzers deliver high-performance signal analysis from 9 kHz to 3.2 GHz in a compact, easy-to-use design. Ideal for R&D, education, production, and pre-compliance testing, it features a large touchscreen and advanced digital IF technology.

    Key Features:

    • All Digital IF technology10.1”
    • WVGA (1024 x 600) touchscreen display
    • Frequency range from 9 kHz to 3.2 GHz
    • -161 dBm/Hz displayed average noise level (typical)
    • -98 dBc/Hz @ 10 kHz offset phase noise (typical)
    • Total amplitude accuracy < 0.7 dB
    • 1 Hz minimum resolution bandwidth (RBW)
    • Built-in preamplifier for improved sensitivity

    Typical Applications

    ● Research Laboratory
    ● Development Laboratory
    ● Repair and Maintenance
    ● Calibration Laboratory
    ● Automatic Production Test
    ● General bench-top use

  • The T3VNA Series from Teledyne Test Tools is a powerful, compact solution for engineers who demand precision and versatility in RF and spectrum analysis.

    Key Features:

    • Vector Network Analysis from 10 MHz to 3.2 GHz
    • Spectrum Analysis from 9 kHz to 3.2 GHz
    • All-digital IF technology for clean signal processing
    • Built-in tracking generator (up to 1.5 GHz)
    • Advanced features like Distance-to-Fault, OBW, ACPR
    • -156 dBm/Hz typical displayed average noise level
    • -98 dBc/Hz @ 10 kHz offset phase noise
    • 1 Hz minimum RBW for high-resolution measurements
    • 10.1″ WVGA display for smooth operation
    • High accuracy with <1.2 dB amplitude error
  • The EMI 64k software allows to embed the TDEMI systems in a fully automated test environment.

    • Full automation of EMI testing according to all commercial and military standards
    • Automated control of turntable, antenna and other equipment
    • Height and Angular Scan
    • Procedures according to standards as well as customized procedures
    • Reducing the cost for EMC and communication testing and certification by tailored packages

     

  • The measurement system for all emission measurments in the frequency range 1 Hz – 44 GHz.

    • Frequency Range  1 Hz – 30MHz, 1GHz, 3GHz, 6GHz, 9GHz, 18GHz, 26GHz, 40 GHz and 44GHz
    • 225 MHz Real-time Analysis Bandwidth
    • Weighted Real-time Spectrogram up to 44 GHz
    • CISPR Bandwidths 200 Hz, 9 kHz, 120 kHz, 1 MHz
    • MIL/DO Bandwidths 10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz, 1 MHz

     

  • The measurement system for all emission measurments in the frequency range 1 Hz – 44 GHz.

    • Full compliance EMI Reciever according to standard CISPR 16-1· 1, ANSI C63.2, MIL->461, and DO·160
    • Spectrum Analyzer
    • Integrated LOW Noise Ampllfier (lNAI)
    • Integrated Preselect1on
    • Tradttional and FFT·based Mode
    • Automatic Stepped Attenuator
    • Ultra Low Noise Floor
    • Excellent spurious Performance
    • Real-time Spectrum Analyzer optional
    • Vast IQ-Bandwidth

     

  • TDEMI Mobile+. The ultra mobile EMI receiver – Emission measurements everytime, everywhere. Fully stand-alone operable.

    • Frequency Ranges 10Hz – 1GHz, 3GHz, 6GHz or 7GHz
    • 16000x faster than conventional receivers
    • Super compact design and 12V supply
    • 225 MHz fully gapless real-time analysis bandwidth
    • Weighted Real-time Spectrogram

     

  • Ultra High Performance RT Spectrum Analyzer. Ultrafast EMI Measurements.

    • Frequency Range from 1 Hz up to 50 GHz
    • 225 MHz Real-time analysis bandwidth
    • 100 dB Dynamic Range
    • Ultrahigh performance preselection in all modes
    • Up to 510 MHz Real-time IQ-Analysis bandwidth
    • Ultra High Performance Spectrum Analyzer

     

     

    • S-parameters DC to 40 GHz, single-ended and mixed-mode
    • Impedance Profile with <1 mm resolution, differential and common-mode
    • Internal, automatic OSLT calibration
    • USB-connected, small, lightweight
    • Flexible display of the measurements
    • Remove effects from fixtures, connectors and cables
    • Emulate eye diagrams with CTLE, DFE and FFE equalization
    • Advanced jitter analysis

     

    • Frequency Range 10 Hz – 1GHz, 3GHz or 6GHz
    • 4000x faster in your pre-certifcation work
    • compact design and +12V power supply
    • 162.5 MHz full gapless real-time analysis bandwidth
    • Weighted Real-time Spectrogram

     

    • requency Range from DC up to 40 GHz
    • 685 MHz Real-time analysis bandwidth
    • Dynamic range of more than 100 dB
    • Multi-GHz real-time scanning up to 40 GHz
    • all 6dB RBWs acc. to CISPR, MIL, DO, ANSI, FCC
    • fastest super-heterodyn receiver on the planet