Absolute EMC

Precision, performance, and scalability packed into a high-efficiency DC power solution. Ideal for demanding test environments and energy recovery.

Key Features:

• Output voltage: 0–240 V DC
• Scalable from 27 kW to 2000+ kW
• Modular build: up to 44 connected units
• Full sink/source operation with regeneration
• Ultra-fast switching: rise/fall time <250 µs
• Accuracy: <0.02% FS with high-res current range
• Auto-ranging capability (factor of 3)
• Control modes: CV, CC, CP, CR, Ri-Sim
• Seamless waveform generation via AnyWave + WaveMaster
• Optional HMI touchscreen and CAN interface

High-speed, modular AC power supply with precision control and full regeneration. Perfect for grid simulation, HIL testing, and EMC validation.

Key Features:

• Power scalable from 30 kVA to 1050+ kVA
• Voltage range: 0–305 V AC with 4 active outputs
• True 4-quadrant regenerative design for energy efficiency
• Ultra-fast switching time (≤200 µs response)
• High current accuracy <0.02% full scale
• Full digital control modes: CV, CC, CP, CR, Ri-Sim
• Programmable grid simulator, AC amplifier, or electronic RLC load
• Compatible with AnyWave & WaveMaster for custom waveform control
• Modular 19” rack-mounted units with low heat and noise output
• Ideal for automotive, aerospace, HIL, EMC, and renewable power testing

A precision-driven, regenerative DC power supply ideal for high-demand testing environments across industries.

Key Features:

• Voltage range: 0 to 320 V DC
• Power output: 36 to 2000+ kW
• Modular and scalable up to 44 units
• Regenerative sink and source operation
• Voltage rise/fall time <250 µs
• Accuracy <0.02% FS with high-res current range
• Auto-ranging factor of 3
• Full digital control: CV, CC, CP, CR, Ri-Sim
• Supports AnyWave + WaveMaster waveform control
• Optional touchscreen HMI and CAN interface

High-efficiency regenerative DC power supply with scalable architecture and ultra-fast switching. Ideal for demanding test environments.

Key Features:

• Voltage range: 0–80 V DC
• Power scalable from 9 kW to 2000+ kW
• Modular: Up to 44 units (parallel, series, combined)
• Full sink/source mode with energy recovery
• Voltage rise/fall time <250 µs
• Current accuracy <0.02% FS
• Auto-ranging with a factor of 3
• Digital control: CV, CC, CP, CR, Ri-Sim
• User-friendly software and HMI options
• AnyWave + WaveMaster for waveform control
• CAN, API, and high-speed bus support

A modular, scalable, and intelligent matrix switching system designed for precision in multi-channel test applications.

Key Features:

• Modular design with up to 4 plugin switch cards
• 6×32 channel matrix, up to 2A per channel
• Remote control via TCP/IP interface
• Integrated diagnostics & safety monitoring
• Compatible with LabView, Python, C++, CANoe, and more
• Auto-cooling with smart fan activation
• Rack-mountable 4HU chassis with high build quality
• Expandable switching lines with CU-600 matrix
• Unlimited waveform size with dual waveform output
• Protocol generation and oscilloscope waveform simulation

The complete turnkey solution for testing high-voltage transient emissions and immunity under ISO 7637-4 standards.

Key Features:

• Full ISO 7637-4 compliance
• Pulse A: Switching noise simulation (100 kHz–10 MHz)
• Pulse B: Low-frequency sinusoidal testing (3 kHz–300 kHz)
• 75W high-power RF amplifier for clean signal output
• Configurable burst generation (1–1000 cycles)
• Galvanically isolated digital I/O and EUT interlock
• Scalable and modular hardware for custom test setups
• Integrated overvoltage and transient protection
• WaveMaster software with graphical waveform creation
• Compatible with LabView, Python, C++, and more

The CAR AWG 6000 is a high-performance, 4-quadrant battery simulator designed for EMC testing on vehicle supply lines. This powerful unit delivers precise voltage variations up to ±70V and 200A, compliant with international automotive standards.

Key Features:

• 4-quadrant voltage/current amplifier
• Battery simulation up to ±70V and 200A
• Compliant with ISO 7637-2, LV 124, LV 148, and more
• Arbitrary waveform generation at 20MSa/s, 16kSa
• Bandwidth up to 1 MHz for small signals
• Simulates pulse 2b, pulse 4, crank profiles, and AC ripple
• Selectable output impedance: 0–200 mΩ
• Overvoltage and overcurrent protection
• Integrated impulse recording function (IRF)
• Remote control via CAR-Remote software and Ethernet

A powerful battery simulator designed for high-voltage automotive testing up to 1500V. Compact, efficient, and ISO 7637-4:2020 compliant.

Key Features:

• Output voltage up to 1500V DC
• Supports 30A at 500V, 10A at 1500V
• Constant power delivery of 15kW
• Slew rate up to 100V/µs for rapid rise time
• Remote PC control via CAR-Remote software
• Parallel stacking up to 10 units (100A total)
• Compliant with ISO 7637-2, ISO 7637-4, FMC1280
• Compact desktop design with built-in Ethernet
• Robust overvoltage and overcurrent protection

The Dips Interrupts Test System is a turnkey EMC solution for immunity testing across multiple IEC/EN 61000-4 standards. Available in 30kVA (43A) and 50kVA (75A) versions, this system is ideal for grid simulation, compliance testing, and R&D validation.

Key Features:

• Fully compliant with IEC/EN 61000-4-11/-13/-14/-27/-28/-34
• Fast switching: <5 µs voltage transition time
• Regenerative 4-quadrant AC grid simulator
• TC.VSE Voltage Slope Enhancer with 1000 A peak current
• Power range from 30 kVA up to 2000+ kVA
• User-friendly ACSControl software with test libraries
• Graphical interface for waveform preview and reporting
• Applications include EMC, inverter, anti-islanding, and medical testing
• Compact rack-mounted design with global certifications (CE, UKCA, RoHS)

A turnkey solution for harmonics and flicker compliance, this system delivers powerful, efficient, and automated testing for today’s high-power demands.

Key Features:

• Fully compliant with IEC/EN 61000-3-2, -3-3, -3-11, and -3-12
• High-power testing up to 75 A and 50 kVA
• Regenerative AC power supply with energy recovery
• Programmable simulation: voltage, frequency, harmonics, interharmonics
• Precision impedance network for accurate flicker measurements
• Advanced power analyzer with harmonic and flicker metering
• Preloaded test sequences with automated software control
• Expandable to include dips, swells, and short interruptions

A compact, high-performance power supply for automotive EMC and battery voltage simulation.

Key Features:

• Battery simulator for 12V, 24V, 42V, and 48V systems
• Output: 0–66V / 0–55A (max)
• Fast voltage rise time up to 100V/µs
• ISO 7637-2 and ISO 16750-2 compliant
• Remote control via CAR-Remote Software
• Impulse Recording Function (IRF) included
• Compact 19-inch desktop form (15 kg only)
• Overvoltage and thermal protection
• Slew rate: 10V/µs with fan cooling system
• Compatible with HILO CAR-SYS test systems

High-performance power simulator designed for advanced EMC and automotive voltage testing.

Key Features:

• Supports 12V, 24V, 42V, 48V, and 70V automotive systems
• Battery simulation with up to 220A current
• Fast voltage rise time up to 100V/µs
• ISO 7637-2 and ISO 16750-2 compliant
• Integrated Impulse Recording Function (IRF)
• Full remote control via CAR-Remote software
• Ethernet interface and built-in safety interlock
• Cooling via fans and heat sink for reliable operation
• Compact 19-inch rackmount desktop system (60 kg)
• Overvoltage and thermal protection included

The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields – including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price. IEC 60601-1-2 calling out IEC 61000-4-39 magnetic immunity for close proximity testing requirements can also now be met with the 10 kHz unit.

• Frequency Range:
  • 10 kHz – 30 MHz Conducted
  • 5 MHz – 1GHz Radiated
• Frequency step:
  • 10/500 kHz switchable CE
  • 5/10 MHz switchable RE
• Includes: Generator, antenna, charger, wood case

• 10 kHz – 3 GHz, 40dB Gain, 5dB N.F.
• Compensation for long cable loss for EMI Measurement
• Improve system noise floor flatness
• High EMI performance
• High linearity LNA for EMI measurement
• High dynamic range
• Unconditionally Stable
• State-of-the-Art Technology