AE Techron Archives | ACA TMetrix Inc.

Quick View
AE Techron 3110A Standards Waveform Generator
The 3110A Standards Waveform Generator is a feature-rich, intuitive tool for engineers conducting EMC testing. From automotive to aviation applications, this unit simplifies the most complex test routines.

Key Features:
- 3,400+ Built-In Tests for automotive and industry standards
- Fast Rise Time: 3 µs full-scale with up to 1 MHz bandwidth
- Segment-Based Waveform Creation for custom sequences
- Free Lifetime Standards Updates
- Automated Triggering via GPIO or LAN
- Flexible Output Control including frequency, amplitude, and DC offset
- Extremely Precise Resolution: 0.01 Hz frequency, 76 µV amplitude
- Supports All Common Waveforms: Sine, square, triangle, DC, ripple, and more
Learn More
Quick View
AE Techron 7224 Linear Amplifier
The 7224 Linear Amplifier delivers power, speed, and precision in a compact 2U form factor. Designed for lab, test, and simulation environments, it provides outstanding performance for demanding applications.

Key Features:
- Up to 900W RMS output power
- Operates in controlled-current or controlled-voltage mode
- Field-configurable for low or high impedance loads
- DC to 1 MHz small signal bandwidth
- Produces up to 50A current or 158V peak
- Slew rate of 90 V/μs for sharp waveform reproduction
- Over-voltage, over-current, and over-temp protection circuits
- Compact 2U rack-mount or benchtop design
- Suitable for Helmholtz coil drivers, MRI/NMR, SMPS component testing
Learn More
Quick View
AE Techron 7548 Linear Amplifier
The 7548 Linear Amplifier is a high-output, low-noise solution engineered for precision and reliability in demanding environments.

Key Features:
- Up to 100 Ap / 195 Vp output
- Delivers 12,000W peak power for 40 ms
- Supports continuous 5,500W output into 1Ω load
- Operates from DC to 100 kHz bandwidth
- Field-selectable current or voltage mode
- Ideal for MIL-STD-704F three-phase testing
- Stackable for 800 Vp or 170 Ap system output
- Built-in protection against over-voltage, over-temp, and overload
- Intuitive LCD display and status indicators
Learn More
Quick View
AE Techron 7796HC Linear Power Amplifier
7796HC Linear Power Amplifier – High Current DC & AC Precision

Key Features:
- Output up to 85A continuous, 200A in-rush current
- Frequency response: DC to 100+ kHz
- Four-quadrant operation: source and sink
- Field-selectable voltage or current modes
- Stable with resistive, inductive, and capacitive loads
- Multiple protections: Over/under voltage, current, and temperature
- Supports DC ripple, surge, dropout, and ground noise simulations
- Ideal for high-current DC Conducted Immunity testing
- LCD with real-time voltage and current metrics
- Supports both balanced and unbalanced inputs
Learn More
Quick View
AE Techron 7800 Series Linear Amplifiers
7800 Series Linear Amplifiers are high-power, high-precision AC/DC amplifiers designed for demanding industrial and research applications.

Key Features:
- Power Output: Up to 20 kW continuous, 40 kW short-term
- Voltage: Up to ±500 Vp
- Current: Up to 800 A peak
- Bandwidth: DC to 60 kHz
- Four-quadrant operation: Source and Sink
- Modes: Selectable voltage or current control
- Protection: Overload, over-temp, short-circuit, and voltage fluctuations
- Ideal for: Resistive, inductive, and capacitive loads
- Low distortion: <0.25% THD
- High accuracy: DC drift < ±400 µV
Learn More
Quick View
AE Techron 8300 Series Power Amplifiers
8300 Series Power Amplifiers combine the precision of linear amplifiers with the efficiency of switch-mode technology for high-performance power delivery.

Key Features:
- Output Power: 2 kW to 10 kW (up to 50 kVA surge)
- Voltage Range: 0–140 VRMS / ±200 VDC
- Current: Up to 425A continuous, 65–300 ARMS
- Bandwidth: DC to 50 kHz
- Slew Rate: Up to 60 V/µs
- Ultra-low THD: <0.2%
- Operates in AC, DC, or AC+DC modes
- Flexible configuration: gain, current limit, impedance, and more
- Ideal for reactive, resistive, and complex loads
Learn More
Quick View
AE Techron AE Techron 7000G Series
AE Techron 7000G Series – Low-Noise Gradient Amplifiers for MRI Imaging

Key Features:
- Robust, DC-enabled linear amplifiers with integrated power supply
- Very-low-noise linear topology for enhanced MRI image quality
- Wide bandwidth up to 1 MHz for precision applications
- Operates as voltage or current source
- No ripple noise, eliminating the need for console synchronization
- Models available for single-phase or three-phase power
- Ideal for low-field and ultra-low-field MRI research
Learn More
Quick View
AE Techron AE Techron 8700 Series
AE Techron 8700 Series High-Frequency Power Amplifier

Key Features:
- Power output from 4 kW to 24 kW (up to 120 kVA)
- Voltage range up to ±400 Vp / 350 VDC
- Current output up to 360 ARMS continuous
- Wide bandwidth: DC to 250 kHz
- High slew rate: up to 300 V/µs
- Switch-mode efficiency with linear performance
- Scalable for both bench and rack applications
- Drives reactive and resistive loads with no power loss
- THD less than 0.8% with ultra-low noise floor
- Ideal for EMC, MIL-PRF, ISO 61000, and automotive testing
Learn More
Quick View
AE Techron AE Techron 9100 Series
AE Techron 9100 Series High-Current Power Amplifiers

Key Features:
- Power output up to 5 kW continuous (4.2 kW for 9105 model)
- Wide bandwidth: DC to 250 kHz
- Voltage output up to 200 Vp
- Current output from 50A to 150A peak
- Fast 7 µs rise/fall time for surges and dropouts
- Slew rate up to 150 V/µs
- Four-quadrant operation (source and sink)
- Stable with highly capacitive loads
- Works from single-phase AC mains (100–250 VAC)
- Ideal for automotive, aviation, and EMC conducted immunity testing
Learn More
Quick View
AE Techron AE Techron RLY Amplifiers
AE Techron RLY Amplifiers – Precision Power for Relay Testing

Key Features:
- Designed for rigorous power utility industry testing
- Peak currents up to 200 amperes for challenging applications
- Wide bandwidth: DC–10 kHz (current) and DC–100 kHz (voltage)
- Low distortion and minimal phase error for accurate results
- Suitable for power grid modeling and relay verification
- Four-quadrant operation for enhanced versatility
- Multiple models for varied voltage and current requirements
Learn More
Quick View
AE Techron Aetec 7794 Amplifier
Aetec 7794 High Current Industrial Amplifier

Key Features:
- Up to 200 Ap / 100 Vp; DC to 150 kHz bandwidth
- Stable with resistive, inductive, or capacitive loads
- Controlled-voltage or controlled-current operation
- Switchable rail supply for optimized load impedance
- 60A continuous output at 13.8V DC
- ±95V DC and >35 V/µs slew rate
- Four-quadrant operation: sourcing and sinking
- Extensive protection against overvoltage, overcurrent, overtemperature
- Rack-mountable chassis with LCD fault diagnostics
Learn More
Quick View
AE Techron AETechron 7796 Amplifier
AETechron 7796 Amplifier – High-Current, Low-Impedance Industrial Power
Ideal for precision testing, EMC simulations, and MRI systems.

Key Features:
- Delivers over 200 Ap peak current, up to ±180V
- DC to 100 kHz bandwidth for versatile signal reproduction
- Four-quadrant operation (source/sink modes)
- Operates in both voltage and current-controlled modes
- Handles in-rush currents up to 200A
- Field-configurable rail supply modes for load optimization
- Advanced protection against voltage, current, and thermal faults
- Stackable for higher voltage or current (up to 800 Ap)
Learn More
Quick View
AE Techron CIS-25 Test Kit
The CIS-25 Test Kit by AE Techron is an all-in-one solution for aviation conducted and induced susceptibility testing. Designed to meet rigorous standards like DO-160 Sections 16, 18, and 19, this kit includes everything needed to perform accurate, repeatable EMC tests with minimal setup.

Key Features:
- Meets Multiple Standards: DO-160 Sections 16 (up to 24VDC), 18, 19, MIL STD 461, Airbus ABD0100.1.8
- Complete Test Kit: Includes DSR 100-25 power system, three coupling transformers, and chattering relay
- 4x Power Surge Capability: Ideal for in-rush testing (up to 200 ms)
- Built-In Standards Library: 3110A library for additional EMC tests
- Expert Guidance Included: Two hours of consulting from EMC specialist Patrick G. Andre
- Secure & Durable: Comes with a lockable storage cabinet and all necessary accessories
Learn More
Quick View
AE Techron DSR 400 Series Test System
The DSR 400 Series Test System is a compact, high-performance simulator for rigorous AC and DC immunity testing. Built for DO 160 and MIL STD 704 compliance, it integrates a powerful waveform generator, cutting-edge power technology, and a vast standards library—making it an ideal solution for demanding EMC test labs.

Key Features:
- Complete Test Solution for DO 160 Sec. 16 and MIL STD 704
- Built-In Standards Library with 3,400+ automotive and aviation test routines
- 4-Quadrant Operation: Sources and sinks current for complex test needs
- High Surge Capability: Delivers 5x rated power for 200 ms
- Fast Rise Time: Less than 30 µs for real-time performance
- Modular Output: 80A or 160A continuous current options available
- Multiple Waveform Options: Includes sine, ripple, triangle, sawtooth, square, and DC
- Remote Control Ready: LAN and GPIO integration for larger systems
- Easy-to-Use Interface: Pre-configured or user-custom test sequences
Learn More
Quick View
AE Techron HVR 1000 Test System
Engineered for cutting-edge EV, automotive, and aerospace compliance, the HVR 1000 is a complete high-voltage ripple test system built to handle demanding lab environments with unmatched precision and safety.

Key Features:
- Wide Frequency Range: AC ripple from 10 Hz to 200 kHz
- High Voltage Output: Up to 1000V DC and 60 kW power
- Waveform Versatility: Generates sine, triangle, and custom signals
- Robust Safety: Multi-layer overvoltage, overcurrent, and thermal protection
- Zero Licensing Fees: Future test standard updates included
- User-Centric Interface: Intuitive controls with HDMI and LAN support
- Flexible Configuration: Available as HVR 1000RG (Ripple Generator only)
- Space-Saving Design: Small footprint, ideal for compact lab setups
Learn More
Quick View
AE Techron HVR 1200RG Ripple Generator
The HVR 1200RG Ripple Generator is a powerful, next-gen solution tailored for electric vehicle high-voltage testing. Designed for use with traction inverters and HIL test stands, this rugged system delivers unmatched ripple current and voltage capabilities across a wide frequency range.

Key Features:
- Ripple Current Output: Up to 600 A peak
- Voltage Range: 0 – 150 Vp (300 Vp-p)
- Wide Frequency Support: 150 Hz to 300 kHz
- DC Voltage Compatibility: 0 – 1200 V (or up to 2000 V in bridged mode)
- Data Monitoring: Real-time tracking of voltage, current, and impedance
- Built-In Protections: Handles short circuits and noisy DUTs effortlessly
- Modular & Expandable: Configurable for current and future EV standards
- Noise-Resistant: Engineered to operate accurately in high-noise environments
Learn More

AE Techron

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features: