Amplifiers

The 7224 Linear Amplifier delivers power, speed, and precision in a compact 2U form factor. Designed for lab, test, and simulation environments, it provides outstanding performance for demanding applications.

Key Features:

• Up to 900W RMS output power
• Operates in controlled-current or controlled-voltage mode
• Field-configurable for low or high impedance loads
• DC to 1 MHz small signal bandwidth
• Produces up to 50A current or 158V peak
• Slew rate of 90 V/μs for sharp waveform reproduction
• Over-voltage, over-current, and over-temp protection circuits
• Compact 2U rack-mount or benchtop design
• Suitable for Helmholtz coil drivers, MRI/NMR, SMPS component testing

The 7548 Linear Amplifier is a high-output, low-noise solution engineered for precision and reliability in demanding environments.

Key Features:

• Up to 100 Ap / 195 Vp output
• Delivers 12,000W peak power for 40 ms
• Supports continuous 5,500W output into 1Ω load
• Operates from DC to 100 kHz bandwidth
• Field-selectable current or voltage mode
• Ideal for MIL-STD-704F three-phase testing
• Stackable for 800 Vp or 170 Ap system output
• Built-in protection against over-voltage, over-temp, and overload
• Intuitive LCD display and status indicators

7796HC Linear Power Amplifier – High Current DC & AC Precision

Key Features:

• Output up to 85A continuous, 200A in-rush current
• Frequency response: DC to 100+ kHz
• Four-quadrant operation: source and sink
• Field-selectable voltage or current modes
• Stable with resistive, inductive, and capacitive loads
• Multiple protections: Over/under voltage, current, and temperature
• Supports DC ripple, surge, dropout, and ground noise simulations
• Ideal for high-current DC Conducted Immunity testing
• LCD with real-time voltage and current metrics
• Supports both balanced and unbalanced inputs

7800 Series Linear Amplifiers are high-power, high-precision AC/DC amplifiers designed for demanding industrial and research applications.

Key Features:

• Power Output: Up to 20 kW continuous, 40 kW short-term
• Voltage: Up to ±500 Vp
• Current: Up to 800 A peak
• Bandwidth: DC to 60 kHz
• Four-quadrant operation: Source and Sink
• Modes: Selectable voltage or current control
• Protection: Overload, over-temp, short-circuit, and voltage fluctuations
• Ideal for: Resistive, inductive, and capacitive loads
• Low distortion: <0.25% THD
• High accuracy: DC drift < ±400 µV

8300 Series Power Amplifiers combine the precision of linear amplifiers with the efficiency of switch-mode technology for high-performance power delivery.

Key Features:

• Output Power: 2 kW to 10 kW (up to 50 kVA surge)
• Voltage Range: 0–140 VRMS / ±200 VDC
• Current: Up to 425A continuous, 65–300 ARMS
• Bandwidth: DC to 50 kHz
• Slew Rate: Up to 60 V/µs
• Ultra-low THD: <0.2%
• Operates in AC, DC, or AC+DC modes
• Flexible configuration: gain, current limit, impedance, and more
• Ideal for reactive, resistive, and complex loads

AE Techron 8700 Series High-Frequency Power Amplifier

Key Features:

• Power output from 4 kW to 24 kW (up to 120 kVA)
• Voltage range up to ±400 Vp / 350 VDC
• Current output up to 360 ARMS continuous
• Wide bandwidth: DC to 250 kHz
• High slew rate: up to 300 V/µs
• Switch-mode efficiency with linear performance
• Scalable for both bench and rack applications
• Drives reactive and resistive loads with no power loss
• THD less than 0.8% with ultra-low noise floor
• Ideal for EMC, MIL-PRF, ISO 61000, and automotive testing

AE Techron 9100 Series High-Current Power Amplifiers

Key Features:

• Power output up to 5 kW continuous (4.2 kW for 9105 model)
• Wide bandwidth: DC to 250 kHz
• Voltage output up to 200 Vp
• Current output from 50A to 150A peak
• Fast 7 µs rise/fall time for surges and dropouts
• Slew rate up to 150 V/µs
• Four-quadrant operation (source and sink)
• Stable with highly capacitive loads
• Works from single-phase AC mains (100–250 VAC)
• Ideal for automotive, aviation, and EMC conducted immunity testing

Aetec 7794 High Current Industrial Amplifier

Key Features:

• Up to 200 Ap / 100 Vp; DC to 150 kHz bandwidth
• Stable with resistive, inductive, or capacitive loads
• Controlled-voltage or controlled-current operation
• Switchable rail supply for optimized load impedance
• 60A continuous output at 13.8V DC
• ±95V DC and >35 V/µs slew rate
• Four-quadrant operation: sourcing and sinking
• Extensive protection against overvoltage, overcurrent, overtemperature
• Rack-mountable chassis with LCD fault diagnostics

AETechron 7796 Amplifier – High-Current, Low-Impedance Industrial Power
Ideal for precision testing, EMC simulations, and MRI systems.

Key Features:

• Delivers over 200 Ap peak current, up to ±180V
• DC to 100 kHz bandwidth for versatile signal reproduction
• Four-quadrant operation (source/sink modes)
• Operates in both voltage and current-controlled modes
• Handles in-rush currents up to 200A
• Field-configurable rail supply modes for load optimization
• Advanced protection against voltage, current, and thermal faults
• Stackable for higher voltage or current (up to 800 Ap)

Broadband RF Amplifiers from Exodus Advanced Communications deliver powerful and reliable signal amplification across a wide frequency spectrum. Designed for demanding RF environments, these solid state power amplifiers provide excellent gain stability, wide bandwidth coverage, and scalable output power. With support for advanced semiconductor technologies and flexible system formats, these broadband RF amplifiers are ideal for defense electronics, RF communications, radar systems, and EMC testing platforms.

Key Features

• Wide frequency coverage from 1 MHz to 18 GHz
• Solid state power amplifier architecture for reliable RF performance
• Output power scalable up to 300 W for modules and 1300 W for systems
• Advanced semiconductor technologies including LDMOS, GaN, and GaAsFET
• Continuous wave and linearized amplifier designs for signal accuracy
• High gain stability for consistent RF signal amplification
• Octave and decade bandwidth capability for flexible RF applications
• Rugged components designed for demanding environments
• Available in benchtop, rackmount, and modular configurations
• Suitable for radar systems, RF immunity testing, and communication platforms

Exodus Low Frequency AMPs – 10 kHz to 4.2 GHz

• High-performance low-frequency amplifiers for RF, defense, and EMC testing
• Coverage: 10 kHz to 4.2 GHz, multiple models available
• Output power scalable from 25 W up to 2 kW per module
• Rugged LDMOS, GaN, and GaAsFET architectures for reliable operation
• CW and linearized solid-state designs for precision signal amplification
• Modular and turnkey system options up to 50 kW
• Optimized for radar, RF immunity, and high-power signal transmission

Low Noise Amplifiers from Exodus Advanced Communications are engineered to deliver exceptional signal clarity and sensitivity across a wide frequency range. Designed for high-performance RF applications, these amplifiers provide ultra low noise figures, high gain, and reliable operation in demanding environments. With coverage from 10 kHz to 50 GHz, Low Noise Amplifiers are ideal for aerospace, defense, telecommunications, and scientific research systems.

Key Features

• Ultra wide frequency coverage from 10 kHz to 50 GHz
• Extremely low noise figure for high sensitivity applications
• High gain performance up to 60 dB
• Output power up to 2 W depending on model
• Advanced RF design for superior signal fidelity
• Available in hermetically sealed and rugged configurations
• Suitable for benchtop, laboratory, and field deployment
• Stable performance across varying environmental conditions
• Designed for satellite communication, radar, and RF testing
• Compact and reliable design for easy integration

Exodus Millimeter AMPs – 18 GHz to 50 GHz

• High-performance millimeter-wave solid-state power amplifiers (SSPAs)
• Frequency range: 18 GHz to 50 GHz for high-frequency RF applications
• Output power scalable from 5 W to 1 kW for modules and systems
• CW and linearized designs for precision signal amplification
• Built with GaN, GaAsFET, chip-and-wire hybrid, and waveguide technologies
• Suitable for radar, EW, RF communications, and EMC testing
• Modular, benchtop, and rackmount formats for flexible deployment

Pulse RF Amplifiers from Exodus Advanced Communications are engineered to deliver high peak power and precision performance across a wide frequency range. Designed for pulse-based RF applications, these solid state power amplifiers provide reliable signal amplification with excellent gain stability and fast response. Built using advanced semiconductor technologies, Pulse RF Amplifiers support demanding applications such as radar systems, RF immunity testing, and high power pulse transmission.

Key Features

• Wide frequency range from 1 MHz to 18 GHz
• High peak output power up to 20 kW for system configurations
• Solid state pulse amplifier design for reliable RF performance
• Advanced technologies including LDMOS, GaN, and GaAsFET
• High gain performance up to 69 dB
• Fast response for pulse signal applications
• CW and pulse optimized designs for accurate signal control
• Rugged construction for demanding RF environments
• Available in benchtop, rackmount, and modular formats
• Ideal for radar, HIRF testing, and RF communication systems

Exodus Ultra High Frequency AMPs – 80 MHz to 26.5 GHz

• High-performance ultra-high frequency solid-state power amplifiers (SSPAs)
• Frequency coverage: 80 MHz to 26.5 GHz, ideal for broad RF applications
• Output power scalable from 10 W to over 1000 W per module
• Built with LDMOS, GaN, GaAsFET, hybrid, and waveguide technologies
• CW and linearized designs for precision signal amplification
• Modular, rackmount, and benchtop systems up to 4000 W
• Applications include radar, RF communications, EMC testing, and defense electronics

Compact yet powerful, the WA301 extends the output of your function generator with clean, reliable amplification up to 30V peak-to-peak.

Key Features:

• 30V peak-to-peak output swing
• DC to 1MHz wide bandwidth
• High impedance input with 0dB to +20dB variable gain
• 50 Ohm and 600 Ohm outputs
• Switchable 20dB output attenuator
• Fully protected output for safe use
• Ideal for extending function generator output capability