Products

Precision, performance, and scalability packed into a high-efficiency DC power solution. Ideal for demanding test environments and energy recovery.

Key Features:

• Output voltage: 0–240 V DC
• Scalable from 27 kW to 2000+ kW
• Modular build: up to 44 connected units
• Full sink/source operation with regeneration
• Ultra-fast switching: rise/fall time <250 µs
• Accuracy: <0.02% FS with high-res current range
• Auto-ranging capability (factor of 3)
• Control modes: CV, CC, CP, CR, Ri-Sim
• Seamless waveform generation via AnyWave + WaveMaster
• Optional HMI touchscreen and CAN interface

Precision meets performance in this regenerative, modular, and highly controllable DC power supply for high-voltage testing applications.

Key Features:

• Output voltage: 0 to 3000 V DC
• Power range: 54 to 2000+ kW
• Fast response: <250 µs rise/fall times
• Regenerative sink/source operation
• High current accuracy: <0.02% FS
• Auto-ranging voltage-current flexibility (factor 3)
• Full digital modes: CV, CC, CP, CR, Ri-Sim
• Modular design with up to 44 units
• Optional HMI touchscreen and CAN interface
• Waveform generation via AnyWave + WaveMaster

High-speed, modular AC power supply with precision control and full regeneration. Perfect for grid simulation, HIL testing, and EMC validation.

Key Features:

• Power scalable from 30 kVA to 1050+ kVA
• Voltage range: 0–305 V AC with 4 active outputs
• True 4-quadrant regenerative design for energy efficiency
• Ultra-fast switching time (≤200 µs response)
• High current accuracy <0.02% full scale
• Full digital control modes: CV, CC, CP, CR, Ri-Sim
• Programmable grid simulator, AC amplifier, or electronic RLC load
• Compatible with AnyWave & WaveMaster for custom waveform control
• Modular 19” rack-mounted units with low heat and noise output
• Ideal for automotive, aerospace, HIL, EMC, and renewable power testing

The 3110A Standards Waveform Generator is a feature-rich, intuitive tool for engineers conducting EMC testing. From automotive to aviation applications, this unit simplifies the most complex test routines.

Key Features:

• 3,400+ Built-In Tests for automotive and industry standards
• Fast Rise Time: 3 µs full-scale with up to 1 MHz bandwidth
• Segment-Based Waveform Creation for custom sequences
• Free Lifetime Standards Updates
• Automated Triggering via GPIO or LAN
• Flexible Output Control including frequency, amplitude, and DC offset
• Extremely Precise Resolution: 0.01 Hz frequency, 76 µV amplitude
• Supports All Common Waveforms: Sine, square, triangle, DC, ripple, and more

A precision-driven, regenerative DC power supply ideal for high-demand testing environments across industries.

Key Features:

• Voltage range: 0 to 320 V DC
• Power output: 36 to 2000+ kW
• Modular and scalable up to 44 units
• Regenerative sink and source operation
• Voltage rise/fall time <250 µs
• Accuracy <0.02% FS with high-res current range
• Auto-ranging factor of 3
• Full digital control: CV, CC, CP, CR, Ri-Sim
• Supports AnyWave + WaveMaster waveform control
• Optional touchscreen HMI and CAN interface

Key Features:

• Dual-channel arbitrary waveform generation with 2.8 MS/s sampling rate and 16-bit resolution.
• Integrated with BOLAB WaveMaster software for graphical and tabular waveform design.
• Endless waveform streaming with double buffer memory for uninterrupted operation.
• Real-time triggering, data acquisition, and live waveform editing.
• Supports importing oscilloscope data, ASCII, and TDMS files.
• Preloaded waveform libraries for LV 124, LV 148, ISO 7637-2, ISO 16750-2, GMW, JLR, VW standards.
• Seamless integration with LabView, Python, CANoe, MATLAB, C/C++ via DLLs.
• Compact and robust design for laboratory and industrial testing applications.

Advanced regenerative DC power supply with full sink/source capability, ultra-fast dynamics, and exceptional precision for demanding applications.

Key Features:

• Scalable from 9 kW to 2000+ kW
• Precise voltage range: 0–60 V DC
• Sink/source mode with full power regeneration
• Exceptional current accuracy <0.02% full scale
• Fast voltage rise/fall times under 250 µs
• Full digital control: CV, CC, CP, CR, Ri-Sim
• Modular setup: parallel, series, or mixed mode
• Auto-ranging factor of 3 for wide flexibility
• Supports CAN, API, and optional HMI touchscreen
• Seamless waveform generation via AnyWave + WaveMaster
• Ideal for automotive, aerospace, HIL, and EMC testing

The 7224 Linear Amplifier delivers power, speed, and precision in a compact 2U form factor. Designed for lab, test, and simulation environments, it provides outstanding performance for demanding applications.

Key Features:

• Up to 900W RMS output power
• Operates in controlled-current or controlled-voltage mode
• Field-configurable for low or high impedance loads
• DC to 1 MHz small signal bandwidth
• Produces up to 50A current or 158V peak
• Slew rate of 90 V/μs for sharp waveform reproduction
• Over-voltage, over-current, and over-temp protection circuits
• Compact 2U rack-mount or benchtop design
• Suitable for Helmholtz coil drivers, MRI/NMR, SMPS component testing

The 7548 Linear Amplifier is a high-output, low-noise solution engineered for precision and reliability in demanding environments.

Key Features:

• Up to 100 Ap / 195 Vp output
• Delivers 12,000W peak power for 40 ms
• Supports continuous 5,500W output into 1Ω load
• Operates from DC to 100 kHz bandwidth
• Field-selectable current or voltage mode
• Ideal for MIL-STD-704F three-phase testing
• Stackable for 800 Vp or 170 Ap system output
• Built-in protection against over-voltage, over-temp, and overload
• Intuitive LCD display and status indicators

7796HC Linear Power Amplifier – High Current DC & AC Precision

Key Features:

• Output up to 85A continuous, 200A in-rush current
• Frequency response: DC to 100+ kHz
• Four-quadrant operation: source and sink
• Field-selectable voltage or current modes
• Stable with resistive, inductive, and capacitive loads
• Multiple protections: Over/under voltage, current, and temperature
• Supports DC ripple, surge, dropout, and ground noise simulations
• Ideal for high-current DC Conducted Immunity testing
• LCD with real-time voltage and current metrics
• Supports both balanced and unbalanced inputs

7800 Series Linear Amplifiers are high-power, high-precision AC/DC amplifiers designed for demanding industrial and research applications.

Key Features:

• Power Output: Up to 20 kW continuous, 40 kW short-term
• Voltage: Up to ±500 Vp
• Current: Up to 800 A peak
• Bandwidth: DC to 60 kHz
• Four-quadrant operation: Source and Sink
• Modes: Selectable voltage or current control
• Protection: Overload, over-temp, short-circuit, and voltage fluctuations
• Ideal for: Resistive, inductive, and capacitive loads
• Low distortion: <0.25% THD
• High accuracy: DC drift < ±400 µV

High-efficiency regenerative DC power supply with scalable architecture and ultra-fast switching. Ideal for demanding test environments.

Key Features:

• Voltage range: 0–80 V DC
• Power scalable from 9 kW to 2000+ kW
• Modular: Up to 44 units (parallel, series, combined)
• Full sink/source mode with energy recovery
• Voltage rise/fall time <250 µs
• Current accuracy <0.02% FS
• Auto-ranging with a factor of 3
• Digital control: CV, CC, CP, CR, Ri-Sim
• User-friendly software and HMI options
• AnyWave + WaveMaster for waveform control
• CAN, API, and high-speed bus support

High-efficiency regenerative DC power supply with scalable architecture and ultra-fast switching. Ideal for demanding test environments.

Key Features:

• Voltage range: 0–80 V DC
• Power scalable from 9 kW to 2000+ kW
• Modular: Up to 44 units (parallel, series, combined)
• Full sink/source mode with energy recovery
• Voltage rise/fall time <250 µs
• Current accuracy <0.02% FS
• Auto-ranging with a factor of 3
• Digital control: CV, CC, CP, CR, Ri-Sim
• User-friendly software and HMI options
• AnyWave + WaveMaster for waveform control
• CAN, API, and high-speed bus support

8300 Series Power Amplifiers combine the precision of linear amplifiers with the efficiency of switch-mode technology for high-performance power delivery.

Key Features:

• Output Power: 2 kW to 10 kW (up to 50 kVA surge)
• Voltage Range: 0–140 VRMS / ±200 VDC
• Current: Up to 425A continuous, 65–300 ARMS
• Bandwidth: DC to 50 kHz
• Slew Rate: Up to 60 V/µs
• Ultra-low THD: <0.2%
• Operates in AC, DC, or AC+DC modes
• Flexible configuration: gain, current limit, impedance, and more
• Ideal for reactive, resistive, and complex loads

AE Techron 7000G Series – Low-Noise Gradient Amplifiers for MRI Imaging

Key Features:

• Robust, DC-enabled linear amplifiers with integrated power supply
• Very-low-noise linear topology for enhanced MRI image quality
• Wide bandwidth up to 1 MHz for precision applications
• Operates as voltage or current source
• No ripple noise, eliminating the need for console synchronization
• Models available for single-phase or three-phase power
• Ideal for low-field and ultra-low-field MRI research