Uncategorized

• High Power Density 3.3kW in 2U
• Wide Range of popular worldwide AC inputs, 1ø (230VAC) & 3ø (208VAC, 400VAC)
• Active Power Factor Correction (Single-Phase & Three-Phase AC Input)
• Output Voltage up to 600V, Current up to 400A
• Built-in RS-232/RS-485 Interface Standard
• Global Commands for Serial RS-232/RS-485 Interface
• Auto-Re-Start / Safe-Start: user selectable
• Last-Setting Memory
• High Resolution 16 bit ADCs & DACs
• Low Ripple & Noise
• Front Panel Lock selectable from Front Panel or Software
• Reliable Encoders for Voltage and Current Adjustment
• Constant Voltage/Constant Current auto-crossover
• Parallel Operation with Active Current Sharing; up to four identical units.
• Advanced Parallel Master / Slave. Total Current is Programmed and Measured via the Master.
• Independent Remote ON/OFF and Remote Enable/Disable

• High Power Density 750W in 1U full-rack size
• Wide Range Input (85 – 265Vac Continuous)
• Active Power Factor Correction (0.99 typical)
• Output Voltage up to 600V, Current up to 100A
• Built-in RS-232/RS-485 Interface Standard
• Last Setting Memory; Front Panel Lockout
• Advanced Parallel reports total current up to four identical units

• Wide Range Input (85 – 265Vac Continuous)
• Active Power Factor Correction (0.99 typical)
• Output Voltage up to 600V, Current up to 100A
• Built-in RS-232/RS-485 Interface Standard
• Last Setting Memory; Front Panel Lockout
• Advanced Parallel reports total current up to four identical units

• Integrated acceleration (velocity) signal
• Self-contained seismic velocity transmitter
• Signal integrator
• Piezo-electric accelerometer
• RMS peak detector
• 4-20 mA signal conditioner

ST5484E Seismic Velocity Transmitter with high- and low-pass filter options

Supply Voltage Inputs 11 – 29.6 VDC (24 VDC nominal) (intrinsically safe), 11 – 30 VDC (24 VDC nominal) (explosion proof and non-incendive)

Type: 24″ Flying Leads – 2-wire

• Dual inputs allows Differential or Phaseto-Phase voltage measurement
• High speed DSP provides up to 60 filtered readings per second
• True RMS AC measurement from 0.01Hz to 600Hz—covering VLF to aviation frequencies
• AC noise rejection 78dB—for rock solid, six digit DC Measurements
• Optional battery pack goes up to 11 hours between charges
• G Series—high input impedance probes for electrostatic applications
• CE mark Certified to EN61010
• Available ISO 17025 accredited calibration
• Three year extended warranty (one year standard warranty)

• The S type Channel card provides economical, high-performance power measurement with a basic 0.1% accuracy and enough bandwidth to handle waveforms up to 1.25 MHz.
• The A-type ultra-precision Channel card offers a 2-year accuracy rating of 0.03% of reading and bandwidth up to 1.25 MHz.
• The W type Wideband Channel card performs precision power measurements on the toughest real-world waveforms, with sampling speed fast enough to tame waveforms up to 5Mhz

• The S type Channel card provides economical, high-performance power measurement with a basic 0.1% accuracy and enough bandwidth to handle waveforms up to 1.25 MHz.
• The A-type ultra-precision Channel card offers a 2-year accuracy rating of 0.03% of reading and bandwidth up to 1.25 MHz.
• The W type Wideband Channel card performs precision power measurements on the toughest real-world waveforms, with sampling speed fast enough to tame waveforms up to 5Mhz

• The S type Channel card provides economical, high-performance power measurement with a basic 0.1% accuracy and enough bandwidth to handle waveforms up to 1.25 MHz.
• The A-type ultra-precision Channel card offers a 2-year accuracy rating of 0.03% of reading and bandwidth up to 1.25 MHz.
• The W type Wideband Channel card performs precision power measurements on the toughest real-world waveforms, with sampling speed fast enough to tame waveforms up to 5Mhz

• High Power Accuracy of 0.045% For All Channels
• Improved Voltage and Current Self-Heating Adders
• Faster Sampling Rates & Bandwidth Performance
• Greater Harmonic Frequencies

• Ultra High Power Accuracy of 0.024% For All Channels
• Improved Voltage and Current Self-Heating Adders
• Faster Sampling Rates & Bandwidth Performance
• Greater Harmonic Frequencies

• 3″ Color Touch Display – Easy To Use Intuitive User Interface
• 6 Functions Choose From – AC/DC Hipot, IR, Ground Bond, Continuity & Built-in Switching
• Made in the USA – Designed & Built in San Diego CA
• Compact, Lightweight, Rugged, Fan Free, Fast (100mS min test time) & Accurate
• 5KV AC/DC Hipot, 20mA max source current
• Ground Bond 1-30A RMS (42 A peak), 100µΩ Resolution
• 100 nano-Amp Leakage Current Resolution
• Low Cost of Ownership – 2 Year Calibration Interval

AC Power Cords 14AWG PLUG-SJ 9FT (2.7m) BLACK

• PowerFlex design gives variable voltage and current combinations within a maximum power envelope
• Up to 60V and up to 20A per output (420W maximum)
• Constant voltage or constant current operation
• Low output noise and good transient response
• PowerFlex or fixed-range operation plus custom limits
• True analogue controls with digital settings locking
• Independent outputs or isolated voltage tracking (dual)
• Outputs can be wired in series or parallel for 120V or 40A
• Variable OVP trips; safety binding-post terminals
• 4 digit fixed resolution meters; selectable remote sensing
• Compact ½ rack 3U case (dual) or ¼ rack 3U case (single)
• Duplicate terminals at rear on CPX400SA, SP & DP
• Isolated analogue control interface (CPX400SA only)
• GPIB, RS-232, USB and LAN interfaces with LXI compliance (CPX400SP & CPX400DP only)

• 2U Chassis – 19″ rack mount 3.48” Height, 9.60” Depth and Weight 6lb.
• Power 120V AC 60Hz
• Washable front removable air filter
• Ball Bearing AC fans provide 330 CFM
• Dual plenum design
• Cooling for 160mm,220mm depth modules
• Diverts lower warmed air to rear of Cabinet
• RM option diverts lower air to front of Cabinet