Uncategorized

The 3110A Standards Waveform Generator is a feature-rich, intuitive tool for engineers conducting EMC testing. From automotive to aviation applications, this unit simplifies the most complex test routines.

Key Features:

• 3,400+ Built-In Tests for automotive and industry standards
• Fast Rise Time: 3 µs full-scale with up to 1 MHz bandwidth
• Segment-Based Waveform Creation for custom sequences
• Free Lifetime Standards Updates
• Automated Triggering via GPIO or LAN
• Flexible Output Control including frequency, amplitude, and DC offset
• Extremely Precise Resolution: 0.01 Hz frequency, 76 µV amplitude
• Supports All Common Waveforms: Sine, square, triangle, DC, ripple, and more

Key Features:

• Dual-channel arbitrary waveform generation with 2.8 MS/s sampling rate and 16-bit resolution.
• Integrated with BOLAB WaveMaster software for graphical and tabular waveform design.
• Endless waveform streaming with double buffer memory for uninterrupted operation.
• Real-time triggering, data acquisition, and live waveform editing.
• Supports importing oscilloscope data, ASCII, and TDMS files.
• Preloaded waveform libraries for LV 124, LV 148, ISO 7637-2, ISO 16750-2, GMW, JLR, VW standards.
• Seamless integration with LabView, Python, CANoe, MATLAB, C/C++ via DLLs.
• Compact and robust design for laboratory and industrial testing applications.

The 7224 Linear Amplifier delivers power, speed, and precision in a compact 2U form factor. Designed for lab, test, and simulation environments, it provides outstanding performance for demanding applications.

Key Features:

• Up to 900W RMS output power
• Operates in controlled-current or controlled-voltage mode
• Field-configurable for low or high impedance loads
• DC to 1 MHz small signal bandwidth
• Produces up to 50A current or 158V peak
• Slew rate of 90 V/μs for sharp waveform reproduction
• Over-voltage, over-current, and over-temp protection circuits
• Compact 2U rack-mount or benchtop design
• Suitable for Helmholtz coil drivers, MRI/NMR, SMPS component testing

7800 Series Linear Amplifiers are high-power, high-precision AC/DC amplifiers designed for demanding industrial and research applications.

Key Features:

• Power Output: Up to 20 kW continuous, 40 kW short-term
• Voltage: Up to ±500 Vp
• Current: Up to 800 A peak
• Bandwidth: DC to 60 kHz
• Four-quadrant operation: Source and Sink
• Modes: Selectable voltage or current control
• Protection: Overload, over-temp, short-circuit, and voltage fluctuations
• Ideal for: Resistive, inductive, and capacitive loads
• Low distortion: <0.25% THD
• High accuracy: DC drift < ±400 µV

8300 Series Power Amplifiers combine the precision of linear amplifiers with the efficiency of switch-mode technology for high-performance power delivery.

Key Features:

• Output Power: 2 kW to 10 kW (up to 50 kVA surge)
• Voltage Range: 0–140 VRMS / ±200 VDC
• Current: Up to 425A continuous, 65–300 ARMS
• Bandwidth: DC to 50 kHz
• Slew Rate: Up to 60 V/µs
• Ultra-low THD: <0.2%
• Operates in AC, DC, or AC+DC modes
• Flexible configuration: gain, current limit, impedance, and more
• Ideal for reactive, resistive, and complex loads

AE Techron 7000G Series – Low-Noise Gradient Amplifiers for MRI Imaging

Key Features:

• Robust, DC-enabled linear amplifiers with integrated power supply
• Very-low-noise linear topology for enhanced MRI image quality
• Wide bandwidth up to 1 MHz for precision applications
• Operates as voltage or current source
• No ripple noise, eliminating the need for console synchronization
• Models available for single-phase or three-phase power
• Ideal for low-field and ultra-low-field MRI research

AE Techron 8700 Series High-Frequency Power Amplifier

Key Features:

• Power output from 4 kW to 24 kW (up to 120 kVA)
• Voltage range up to ±400 Vp / 350 VDC
• Current output up to 360 ARMS continuous
• Wide bandwidth: DC to 250 kHz
• High slew rate: up to 300 V/µs
• Switch-mode efficiency with linear performance
• Scalable for both bench and rack applications
• Drives reactive and resistive loads with no power loss
• THD less than 0.8% with ultra-low noise floor
• Ideal for EMC, MIL-PRF, ISO 61000, and automotive testing

AE Techron 9100 Series High-Current Power Amplifiers

Key Features:

• Power output up to 5 kW continuous (4.2 kW for 9105 model)
• Wide bandwidth: DC to 250 kHz
• Voltage output up to 200 Vp
• Current output from 50A to 150A peak
• Fast 7 µs rise/fall time for surges and dropouts
• Slew rate up to 150 V/µs
• Four-quadrant operation (source and sink)
• Stable with highly capacitive loads
• Works from single-phase AC mains (100–250 VAC)
• Ideal for automotive, aviation, and EMC conducted immunity testing

AE Techron RLY Amplifiers – Precision Power for Relay Testing

Key Features:

• Designed for rigorous power utility industry testing
• Peak currents up to 200 amperes for challenging applications
• Wide bandwidth: DC–10 kHz (current) and DC–100 kHz (voltage)
• Low distortion and minimal phase error for accurate results
• Suitable for power grid modeling and relay verification
• Four-quadrant operation for enhanced versatility
• Multiple models for varied voltage and current requirements

Key Features:

• Wide frequency range: 9 kHz – 8 GHz
• High gain: 29 dB up to 6 GHz, 27 dB from 6 – 8 GHz
• Low noise figure: < 2.7 dB @ 1 GHz
• Compact aluminum housing (85 × 36 × 29 mm, 130 g)
• ESD-protected input for safe operation
• Operates on simple +12 V DC power supply
• Rugged and lightweight design for field and lab use

CDG 7000 Conducted Immunity Test System, 10 kHz – 400 MHz

Key Features:

• All-in-one IEC/EN 61000-4-6 immunity test system with RF signal generator, power amplifier, 3-channel RF voltmeter, and directional coupler.
• Frequency range from 10 kHz to 400 MHz with multiple amplifier versions (25 W, 75 W, 75 W/10k).
• Supports BCI tests (ISO 11452-4) and NAMUR standards.
• Advanced software HELIA 7 with EUT monitoring and automated reporting.
• Interfaces: USB, LAN, optional GPIB for flexible integration.
• Expandable with external amplifiers and configurable digital I/O.
• Compact, robust 19″ desktop housing with 3-year warranty.

The CIS-25 Test Kit by AE Techron is an all-in-one solution for aviation conducted and induced susceptibility testing. Designed to meet rigorous standards like DO-160 Sections 16, 18, and 19, this kit includes everything needed to perform accurate, repeatable EMC tests with minimal setup.

Key Features:

• Meets Multiple Standards: DO-160 Sections 16 (up to 24VDC), 18, 19, MIL STD 461, Airbus ABD0100.1.8
• Complete Test Kit: Includes DSR 100-25 power system, three coupling transformers, and chattering relay
• 4x Power Surge Capability: Ideal for in-rush testing (up to 200 ms)
• Built-In Standards Library: 3110A library for additional EMC tests
• Expert Guidance Included: Two hours of consulting from EMC specialist Patrick G. Andre
• Secure & Durable: Comes with a lockable storage cabinet and all necessary accessories

The DAM 6.0-P Dual Antenna Mast is a high-precision, dual-antenna mast designed for accurate EMC measurements in magnetic absorption chambers.

Key Features:

• Adjustable height from 1.0 m to 6.0 m with electric stepper motor
• Pneumatic polarization change 0° to 90° in approx. 3 seconds
• Dual antenna support with max. load 20 kg (balanced)
• Rotating antenna bars to eliminate elevation errors
• Robust base: 0.95 m x 0.73 m
• Non-metallic construction (plastic and reinforced fiberglass)
• Remote control via LAN (TCP/IP) with FCU3.0 or NCD Controller
• Suitable for EMC testing labs, automotive, industrial, and telecom setups

Reliable digital transmission system for analog audio and video signals with multiple configuration options for EMC testing and monitoring.

Key Features:

• Transmits analog audio and video signals digitally over fiber optics
• Supports both unidirectional and bidirectional communication
• Available in multiple configurations: audio (stereo), video (NTSC/PAL), or combined
• Ideal for EMC testing, acoustic monitoring, and immunity test surveillance
• Integrated microphone and external input/output support in intercom models
• Suitable for automotive, military, aerospace, and RF industries
• Compliant with MIL-STD-461 standards

The DYN 8WD I-30t Dynamometer integrated into TT 16.0-30t Turntable is a high-capacity vehicle testing solution designed for EMC-compliant measurement and simulation.

Key Features:

• Load capacity: 30,000 kg with adjustable axle configuration
• Maximum dynamometer speed: 120 km/h
• Turntable diameter: 16.0 m, rotational speed 0.1–0.5 rpm
• Adjustable track width: 900 mm – 2700 mm
• Turntable height: 2800 mm, stainless steel cover plate
• Servo motor-driven turntable with bevel gear for smooth rotation
• Integrated emergency stop and safety switches
• Software-controlled with Maturo DynSoft, including cycle simulation, speed, torque, and force monitoring
• EMC compliant: emissions typically 10 dB under CISPR 12 and CISPR 25 limits
• Supports advanced vehicle test cycles, ABS/ESP testing, uphill/downhill simulation, and tractive force control

EMC03640A Low Noise Preamplifier – 30 MHz to 6 GHz

Key Features:

• Wide frequency range: 30 MHz to 6 GHz
• High gain: 40 dB minimum with ±2.5 dB flatness
• Low noise figure: ≤ 2.5 dB
• High EMI performance with excellent linearity
• Compensates for long cable loss in EMI measurements
• Improves system noise floor flatness
• Unconditionally stable with high dynamic range
• State-of-the-art technology for compliance testing
• Meets major EMI/EMC standards (ANSI, CISPR, MIL-STD)
• Compact and robust design with AC mains power input