Uncategorized

The 3110A Standards Waveform Generator is a feature-rich, intuitive tool for engineers conducting EMC testing. From automotive to aviation applications, this unit simplifies the most complex test routines.

Key Features:

• 3,400+ Built-In Tests for automotive and industry standards
• Fast Rise Time: 3 µs full-scale with up to 1 MHz bandwidth
• Segment-Based Waveform Creation for custom sequences
• Free Lifetime Standards Updates
• Automated Triggering via GPIO or LAN
• Flexible Output Control including frequency, amplitude, and DC offset
• Extremely Precise Resolution: 0.01 Hz frequency, 76 µV amplitude
• Supports All Common Waveforms: Sine, square, triangle, DC, ripple, and more

The 7224 Linear Amplifier delivers power, speed, and precision in a compact 2U form factor. Designed for lab, test, and simulation environments, it provides outstanding performance for demanding applications.

Key Features:

• Up to 900W RMS output power
• Operates in controlled-current or controlled-voltage mode
• Field-configurable for low or high impedance loads
• DC to 1 MHz small signal bandwidth
• Produces up to 50A current or 158V peak
• Slew rate of 90 V/μs for sharp waveform reproduction
• Over-voltage, over-current, and over-temp protection circuits
• Compact 2U rack-mount or benchtop design
• Suitable for Helmholtz coil drivers, MRI/NMR, SMPS component testing

7800 Series Linear Amplifiers are high-power, high-precision AC/DC amplifiers designed for demanding industrial and research applications.

Key Features:

• Power Output: Up to 20 kW continuous, 40 kW short-term
• Voltage: Up to ±500 Vp
• Current: Up to 800 A peak
• Bandwidth: DC to 60 kHz
• Four-quadrant operation: Source and Sink
• Modes: Selectable voltage or current control
• Protection: Overload, over-temp, short-circuit, and voltage fluctuations
• Ideal for: Resistive, inductive, and capacitive loads
• Low distortion: <0.25% THD
• High accuracy: DC drift < ±400 µV

8300 Series Power Amplifiers combine the precision of linear amplifiers with the efficiency of switch-mode technology for high-performance power delivery.

Key Features:

• Output Power: 2 kW to 10 kW (up to 50 kVA surge)
• Voltage Range: 0–140 VRMS / ±200 VDC
• Current: Up to 425A continuous, 65–300 ARMS
• Bandwidth: DC to 50 kHz
• Slew Rate: Up to 60 V/µs
• Ultra-low THD: <0.2%
• Operates in AC, DC, or AC+DC modes
• Flexible configuration: gain, current limit, impedance, and more
• Ideal for reactive, resistive, and complex loads

AE Techron 7000G Series – Low-Noise Gradient Amplifiers for MRI Imaging

Key Features:

• Robust, DC-enabled linear amplifiers with integrated power supply
• Very-low-noise linear topology for enhanced MRI image quality
• Wide bandwidth up to 1 MHz for precision applications
• Operates as voltage or current source
• No ripple noise, eliminating the need for console synchronization
• Models available for single-phase or three-phase power
• Ideal for low-field and ultra-low-field MRI research

AE Techron 8700 Series High-Frequency Power Amplifier

Key Features:

• Power output from 4 kW to 24 kW (up to 120 kVA)
• Voltage range up to ±400 Vp / 350 VDC
• Current output up to 360 ARMS continuous
• Wide bandwidth: DC to 250 kHz
• High slew rate: up to 300 V/µs
• Switch-mode efficiency with linear performance
• Scalable for both bench and rack applications
• Drives reactive and resistive loads with no power loss
• THD less than 0.8% with ultra-low noise floor
• Ideal for EMC, MIL-PRF, ISO 61000, and automotive testing

AE Techron 9100 Series High-Current Power Amplifiers

Key Features:

• Power output up to 5 kW continuous (4.2 kW for 9105 model)
• Wide bandwidth: DC to 250 kHz
• Voltage output up to 200 Vp
• Current output from 50A to 150A peak
• Fast 7 µs rise/fall time for surges and dropouts
• Slew rate up to 150 V/µs
• Four-quadrant operation (source and sink)
• Stable with highly capacitive loads
• Works from single-phase AC mains (100–250 VAC)
• Ideal for automotive, aviation, and EMC conducted immunity testing

AE Techron RLY Amplifiers – Precision Power for Relay Testing

Key Features:

• Designed for rigorous power utility industry testing
• Peak currents up to 200 amperes for challenging applications
• Wide bandwidth: DC–10 kHz (current) and DC–100 kHz (voltage)
• Low distortion and minimal phase error for accurate results
• Suitable for power grid modeling and relay verification
• Four-quadrant operation for enhanced versatility
• Multiple models for varied voltage and current requirements

The CIS-25 Test Kit by AE Techron is an all-in-one solution for aviation conducted and induced susceptibility testing. Designed to meet rigorous standards like DO-160 Sections 16, 18, and 19, this kit includes everything needed to perform accurate, repeatable EMC tests with minimal setup.

Key Features:

• Meets Multiple Standards: DO-160 Sections 16 (up to 24VDC), 18, 19, MIL STD 461, Airbus ABD0100.1.8
• Complete Test Kit: Includes DSR 100-25 power system, three coupling transformers, and chattering relay
• 4x Power Surge Capability: Ideal for in-rush testing (up to 200 ms)
• Built-In Standards Library: 3110A library for additional EMC tests
• Expert Guidance Included: Two hours of consulting from EMC specialist Patrick G. Andre
• Secure & Durable: Comes with a lockable storage cabinet and all necessary accessories

The EME Wide is a professional wideband field meter designed to monitor and record electromagnetic field (EMF) exposure with accuracy and reliability.

Key Features:

• Frequency range: 0.1 MHz – 6.5 GHz
• Tri-axial probe ensures maximum isotropy in measurements
• Measures isotropic and single-axis (X, Y, Z) field values
• Supports RMS, maximum, and time/spatial averaging
• Selectable units: V/m, A/m, W/m²
• Built-in alarm with programmable thresholds
• Large 2.8” LCD display with LED backlight
• Stores up to 20,000 measurement points in non-volatile memory
• Rechargeable AA NiMH battery with external wall charger
• Compliance with 2013/35/EU Directive, ICNIRP, FCC 96-326, and Safety Code 6

Compact yet powerful, the WA301 extends the output of your function generator with clean, reliable amplification up to 30V peak-to-peak.

Key Features:

• 30V peak-to-peak output swing
• DC to 1MHz wide bandwidth
• High impedance input with 0dB to +20dB variable gain
• 50 Ohm and 600 Ohm outputs
• Switchable 20dB output attenuator
• Fully protected output for safe use
• Ideal for extending function generator output capability

The EME Guard Plus is a lightweight and robust personal protection monitor designed to ensure the safety of workers operating near electromagnetic field (EMF) emitters such as antennas, radars, and base stations. With a frequency range of 1 MHz to 40 GHz, this device continuously monitors and records EMF exposure levels while providing immediate audio, visual, and vibrating alerts when exposure exceeds predefined safety thresholds. Customizable alarm settings and a triaxial isotropic probe ensure accurate and reliable measurements.

The EME Guard XS Radar is a state-of-the-art RF safety monitor, specifically designed for workers operating near radar transmitters and antennas. With its isotropic tri-axis E-field sensors, this compact device provides continuous EMF monitoring over a frequency range of 1 MHz to 40 GHz, including short pulsed signal detection. Equipped with audio and visual alarms, it alerts users instantly when EMF exposure exceeds predefined safety thresholds, creating a safer working environment for military, aviation, and telecom personnel.

• Highly Damped Step Respond
• Simple installation – No tuning require
• Application-specific designs/products/
• Capabilities to meet your needs
• Ability to support massive machines, tools, systems

• 6 degrees of freedom
• Active gain starting from 0.5Hz
• Variable Damping (patent pending)
• Build In Artificial Intelligence Feature
• Adjustable by software active bandwidth
• Remote control
• Built in real time diagnostic tools
  • Spectrum analyzer
  • Oscilloscope
• Shaker Mode

• 6 degrees of freedom
• Active gain starting from 0.5Hz
• Variable Damping (patent pending)
• Build In Artificial Intelligence Feature
• Adjustable by software active bandwidth
• Remote control
• Built in real time diagnostic tools
  • Spectrum analyzer
  • Oscilloscope
• Shaker Mode