‹ Back to previous page

AGX-AC-and-DC-Regenerative-4-Quadrant-Source-Front-View

AGX Series Regenerative AC & DC Power Source

Fully programmable AC/DC power source, current source, power supply, and electronic load
4-Quadrant AC/DC operation for sourcing and sinking power
Power range: 6kVA/kW to 21kVA/kW in a 4U chassis
Parallel units for up to 168kVA/kW; dual cabinets up to 252kVA/kW
AC, DC, and AC+DC output capability
Single, split, three-phase, and multi-channel configurations
Voltage: 350Vac L-N/606Vac L-L or ±500Vdc
Frequency range: 15Hz-1200Hz (option up to 3000Hz)
Regenerative power > 90%, SiC technology
Galvanic isolation from facility AC input to output and between output phases/channels

REQUEST A QUOTE

Category: Uncategorized

Introducing the AGX Series Regenerative AC & DC Power Source

Programmable AC & DC Power Source in 4 Quadrant Operation

The AGX Series offers high-power AC, DC, and AC+DC sources, ranging from 6kVA/kW to 21kVA/kW in a single 4U chassis, with the ability to parallel units up to 168kVA/kW or dual cabinets up to 252kVA/kW. It supports four-quadrant operation for sourcing and sinking AC or DC power and various output/input configurations. Applications include aerospace and defense testing, EV charging, solar inverters, energy storage systems, smart-grid simulation, and EMC compliance.

Constant Power Voltage Range

The AGX Series provides a single constant power voltage range, allowing higher current at lower voltage and higher voltage at lower currents, eliminating the need to switch between voltage ranges and ensuring continuous power delivery.

Exceptionally High Current

The AGX delivers a broad current range, reducing the risk of over or under-sizing the power source and minimizing additional capital investment. It offers 20% more current from 120V to 200V compared to typical units.

Wide Frequency Range with Extended Option up to 3000Hz

The AGX’s wide frequency range of 15Hz to 1200Hz, with an extended option up to 3000Hz, provides flexibility for avionics and defense applications requiring varied frequency ranges.

Simultaneous AC & DC Operation on Single Phases

The AGX allows simultaneous AC and DC load operation on single phases with automatic output mode switching, offering configurations for single, split, three-phase, and multi-channel options with full galvanic isolation for user safety.

Optional AC/DC Regenerative Load Reduces Capital Costs

The “L” option adds regenerative electronic load capability, simulating linear and non-linear loads and various AC/DC operating modes, reducing the need for separate testing equipment and cutting capital costs.

Simplify Testing with SmartSource Suite Remote Control Platform

The built-in SmartSource Suite Remote Control Platform provides real-time remote control, development, and execution of test sequences via an intuitive web browser interface on any mobile device, simplifying testing and enhancing efficiency.

AGX Series Regenerative AC & DC Power Source

Key Features

All-in-1 AC & DC Power Source, Current Source, DC Power Supply, AC & DC Electronic Load (Option L)
Four Quadrant Operation with energy recovery back to the grid
Ultimate Flexibility with 6 configurations: 1, 2 or 3 Phase, dual or triple independent outputs/inputs, single + split outputs/inputs.
AC, DC, AC+DC offset, DC + AC Ripple modes. Full power available in AC and DC
Single constant power voltage (Voltage Source mode) or current range (Current Source mode)
Advanced waveform capture scope function
Harmonic measurement for voltage and current on all phases
Precision True-RMS metering of Volts, Amps, Power, VA, Power Factor and Crest Factor
Harmonics (Interharmonics with option)
Extensive Analog and Digital I/O for ATE and system integration.
Sine, Square, Triangle, THD and Arbitrary waveforms
380V-480V 3 Phase AC input with Active PF
Standard Models in Power Levels from 6kVA to 21kVA. Parallel units up to 252 kVA.
200 stored programs for both static and dynamic Transient Testing
LIST, PULSE and STEP Mode Transients
Programmable Output Impedance (R+L) both Real-Time & RMS modes
Continuous Self Calibration (CSC)/li>
Precision Voltage Programming – 0.02% with CSC engaged in AC and DC modes
Standard Ethernet (LAN), USB, GPIB and RS-232 Interfaces with SCPI compatibility
LXI Compliant LAN/Ethernet with embedded web server
IVI Instrument drivers
POWER FLEX upgrade program allows units to be retrofitted for higher power output

Key Benefits

High Flexibility: AC, DC, and AC+DC output capabilities for various test applications
Wide Power Range: 6kVA/kW to 21kVA/kW, scalable to 252kVA/kW with parallel units
Regenerative Operation: Over 90% efficiency, reducing energy costs
Galvanic Isolation: Ensures safety and protection for users and equipment
Advanced Control: Four-quadrant operation for precise sourcing and sinking
Wide Frequency Range: Standard 15Hz to 1200Hz, extended option up to 3000Hz
Constant Power Voltage Range: Eliminates the need to switch between voltage ranges, preventing power disruptions
High Current Capability: Provides 20% more current from 120V to 200V compared to competitors
Simultaneous AC & DC Operation: Flexibility for test engineers with automatic mode switching
Optional Regenerative Load: Adds load emulation modes, reducing capital costs
SmartSource Suite: Remote control platform for real-time test monitoring and execution

Trust the Experts at ACA TMetrix Inc.

ACA TMetrix Inc. is a leading Canadian distributor of test and measurement instruments and design tools. For over 55 years we have provided products manufactured by the world’s leading instrument manufacturers. Leading Distributor of Design Tools and Test Equipment in Canada.

Specifications

Power Source Specifications

Output Frequency:

DC, 15 to 1200 Hz Extended range: 1 to 3,000 Hz range with derating.

DC Voltage Range:

0 – 500 Vdc Constant Power Mode.

Output Modes:

Source: AC, DC, AC+DC, DC+AC
Load: AC, DC, AC+DC, DC+AC

Phase Output Forms:

Single (1), Split (2) and Three Phase (3) Forms Dual, Tripple, 2+1 Forms

AC Voltage Range:

0 – 350 Vrms L-N / 0-606 Vrms L-L

Programmable Impedance:

Resistive -10 Ohm to +10 Ohm, Inductive 0 to 2 mH

Mechanical Specifications

All AGX models are designed for operation in 19-inch equipment racks. Models above 21 kVA require parallel operating of one AGX Master unit and one or more auxiliary no-controller (NC) units. Models 3300AGX through 310500AGX are available as cabinet systems with all internal input and output wiring, terminal blocks and parallel connections included.

Mounting:

Standard 19 inch rack. Slide rails are available as an option for all AGX units.

Height:

See model table for panel or cabinet height.

Depth:

Approximately 25 inch, from the front panel to the rear of the chassis.

Cooling:

Front forced air intake with rear exhaust. Automatic Fan Speed Control for low acoustic noise and extended fan life. The available energy saving sleep modes of the AGX result in low power consumption during idle periods and extend the life of the product.

Expanding the AC Power Source into an Automated Test System

Pacific’s line of SmartRegen® AC Power Sources enables engineers to easily automate their testing by using industry-standard software development environments. The AGX series offers standard Ethernet/LAN connectivity, a browser interface, LXI compliance (LAN extensions for Instruments) to ensure inter-operability with other LXI instruments and IVI (Interchangeable Virtual Instrument) driver to speed up ATE test program development.

Datasheet

Related products

Quick View
HIOKI E E CORPORATION Hioki Non-Metallic Contact Voltage Detector 3120 with Battery Life Indicator
- Top “primary supply level” safety class rating for voltage detectors
- CAT IV 1000 V design meets CE Mark qualifications
- Continuously indicate battery status with green indicator lamp
- Both visual and audible voltage detection indication
- Automatic power switching prevents battery discharge
Read more
Quick View
MOHR MIL‐STD‐1553B TRB Adapter Kit for TDR Testing
Simplify Aging Aircraft Wiring Maintenance Using High-Resolution MOHR CT100 Series TDR Cable Analyzers
- Designed for use with the high-resolution CT100 TDR Cable Tester
- Ideal for TDR testing MIL-STD-1553B data bus aerospace cable assemblies
- Detect and localize open, short, and partial cable and connector faults on the main bus and stubs
- Detects cable and connector faults through 3+ transformer couplers
- Simplifies troubleshooting of aging aircraft MIL-STD-1553 cable assemblies
Read more
Quick View
HIOKI E E CORPORATION Hioki Non-contact Infrared Thermometer Sharply Focus FT3700
On Measurement Spots with Two-Beam Laser Marker, Ideal for HVAC Applications
- Pistol design with easy-to-see display
- A full menu of basic measuring functions
- Easily test in difficult locations, moving objects or where there is danger of electric shock
Read more

Quick View

HIOKI E E CORPORATION Hioki Power quality analyzer PQ3100

3-Phase 4-Wire Power Quality Analyzer Compliant to IEC61000-4-30 Class S Standards and On-screen Guide to Deliver Easy Setup and Testing

Model No. (Order Code)

PQ3100	main unit, clamp sensor is sold separately
PQ3100-91	kit includes 600 A sensor × 2 and other options
PQ3100-92	kit includes 600 A sensor × 4 and other options
PQ3100-94	kit includes 6000 A sensor × 4 and other options

Note: An optional current sensor is necessary to measure current or power parameters. Select from Value Kits for added savings.

Get in touch with us to inquire about our tailored consulting services.

Request a Consultation